ONKYO TX-RZ50 AV Receiver Instructions

ONKYO TX-RZ50 AV Receiver

Product Information

Specifications

• Model: Onkyo TX-NR7100/TX-RZ50
• Current Firmware Version: R123-0610-0160-0031

Firmware Updates

1. Minor bug fixes and stability improvements.
2. Updates the supported speakers for Klipsch Optimized Mode by adding ceiling/wall-mounted speakers and subwoofers. The UI for speaker selection is also changed.
3. Adds ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate) information to OSD Info/Status/One Shot display for input signals.

09/09/2022 Update

1. Updates the compatible speakers for Klipsch Optimized Mode by adding Klipsch Reference Premiere series new models.
2. Improves stability of Bluetooth Transmitter function.
3. Raises the upper limit of the Dirac delay time from 20 msec to 50 msec.
4. Adds recovery process when Network Error occurs in Dirac.
5. Minor bug fixes and stability improvements.

05/18/2022 Update

1. Adds Klipsch Reference Premiere II series speakers to the compatible speakers for Klipsch Optimized Mode, including some updates of Klipsch Reference series.
2. Improves mic curve characteristics of Dirac Live for the mic used for Dirac Live calibration. If already calibrated, then please recalibrate Dirac live after this update.
3. Minor bug fixes and stability improvements.

01/12/2022 Update

1. Chromecast built-in version update to 1.52GM2.
2. Improves reception capability in certain TuneIn Radio stations.
3. Fixes the issue that cannot playback Deezer in the condition of not log-in state.
4. Fixes the issue that Web Setup cannot be accessed depending on the measurement result of Dirac Live.
5. Minor bug fixes and stability improvements.

10/14/2021 Update

1. Chromecast built-in version updated to 1.52.
2. Fixes the no sound and video issue via eARC connection from SONY TV.

07/20/2021 Update

1. The Klipsch Optimized Mode function has been added. Refer to the link for more details.
2. Virtual Remote, Limit Mode, and HDMI diagnostic functions have been added to the Web Setup Menu.
3. Fixed the problem that the audio format of TIDAL playback becomes AAC.
4. Fixed the problem of color corruption in Dolby Vision games on Xbox.
5. Fixed a problem where the image would not be displayed when VRR was turned on for Xbox.
6. Fixed the problem where High Bit Rate Audio such as Dolby TrueHD would not be output when 4K or 8K resolution signals were input.
7. Fixed the problem where audio would not be output from the TV speakers when playing High Bit Rate Audio signals such as Dolby TrueHD in TV audio output mode.
8. Fixed a problem with the HDMI diagnostic function Source Test.

Product Usage Instructions

Firmware Update Instructions

1. Connect the unit to a network.
2. Access the firmware update option in the settings menu of the Onkyo AV Receiver.
3. Select the network update option.
4. Wait for the receiver to check for available updates.
5. If an update is found, follow the on-screen instructions to download and install the update.
6. Once the update is complete, the receiver will restart automatically.

Updating the firmware via USB connection

1. Prepare a USB storage device with a capacity of 128 MB or larger.
2. Download the firmware update file from the official Onkyo website or the provided source.
3. Copy the firmware update file to the root directory of the USB storage device.
4. Connect the USB storage device to the USB port of the Onkyo AV Receiver.
5. Access the firmware update option in the settings menu of the receiver.
6. Select the USB update option.
7. Wait for the receiver to detect the firmware update file on the USB storage device.
8. Follow the on-screen instructions to initiate the firmware update.
9. Do not disconnect the power or remove the USB storage device during the update process.
10. Once the update is complete, the receiver will restart automatically.

FAQ

Q: How do I know which firmware version is currently installed on my Onkyo AV Receiver?

A: To check the current firmware version, follow these steps:

1. Access the settings menu of the Onkyo AV Receiver.
2. Navigate to the firmware or system information section.
3. Look for the firmware version information displayed on the screen.

Q: Do I need to recalibrate Dirac Live after a firmware update?

A: If you have already calibrated Dirac Live before the firmware update, it is recommended to recalibrate Dirac Live after the update. This ensures optimal audio performance with the updated firmware.

Firmware Update Instructions

Firmware Update Onkyo TX-NR7100/TX-RZ50   (03-30-2023)

• We are pleased to offer this firmware update for the best possible performance of your Onkyo AV Receiver.
• This update may be installed via USB or Network.
• TX-NR7100/TX-RZ50  (Current Version R123-0610-0160-0031)

The 03/30/2023 update will address the following:

1. Minor bug fixes and stability improvements.
2. Update the supported speakers for Klipsch Optimized Mode.
   • Add ceiling/wall-mounted speakers/subwoofers.
   • Change the UI for speaker selection.
3. Add ALLM, and VRR information to OSD Info/Status/One Shot display for input signals.

The 09/09/2022 update will address the following:

1. Update the compatible speakers for Klipsch Optimized Mode. Add Klipsch Reference Premiere series new models.
2. Improve stability of Bluetooth Transmitter function.
3. Raise the upper limit of the Dirac delay time from 20 msec to 50 msec.
4. Add recovery process when Network Error occurs in Dirac.
5. Minor bug fixes and stability improvements.

The 05/18/2022 update will address the following:

1. Add Klipsch Reference Premiere II series speakers to the compatible speakers for Klipsch Optimized Mode. (Including some updates of the Klipsch Reference series)
2. Improve mic curve characteristics of Dirac live for the mic used for Dirac live calibration. If already calibrated, then please recalibrate Dirac live after this update.
3. Minor bug fixes and stability improvements.

The 01/12/2022 update will address the following:

1. Chromecast built-in version update to 1.52GM2.
2. Improve reception capability in certain TuneIn Radio stations.
3. Fix the issue that cannot playback Deezer in the condition of not logging state.
4. Fix the issue that Web Setup cannot be accessed depending on the measurement result of Dirac Live.
5. Minor bug fixes and stability improvements.

The 10/14/2021 update will address the following:

1. Chromecast built-in version updated to 1.52.
2. Fix the no sound and video issue via eARC connection from SONY TV.

The 07/20/2021 update will address the following:

1. The “Klipsch Optimized Mode” function has been added. Please refer to the link below for more details. https://www.onkyo.com/manual/sup/upd/combo_onk.pdf
2. Virtual Remote, Limit Mode, and HDMI diagnostic functions have been added to the Web Setup Menu.
3. Fixed the problem that the audio format of TIDAL playback becomes AAC.
4. Fixed the problem of color corruption in Dolby Vision games on Xbox.
5. Fixed a problem where the image would not be displayed when VRR was turned on for Xbox.
6. Fixed the problem where High Bit Rate Audio such as Dolby TrueHD would not be output when 4K or 8K resolution signals were input.
7. Fixed the problem where audio would not be output from the TV speakers when playing High Bit Rate Audio signals such as Dolby TrueHD in TV audio output mode.
8. Fixed a problem with the HDMI diagnostic function Source Test.

Firmware Update Instructions

• Update the firmware via network or USB connection.
• Updating the firmware via network”
• You can update the firmware by connecting the unit to a network. “Updating the firmware via USB connection”
• You need a 128 MB or larger capacity USB storage for updating.
• For details, see “Firmware Update” of the Instruction Manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>