ONKYO TX-NR6100 AV Receiver Instruction Manual
- October 30, 2023
- ONKYO
Table of Contents
TX-NR6100 AV Receiver
Product Information: AV Receiver TX-NR6100
The AV Receiver TX-NR6100 is a high-quality audio and video
receiver that provides an immersive home theater experience. The
receiver supports various speaker layouts, including 3.1, 5.1, 7.1,
3.1.2, and 5.1.2 channel systems. It also features speaker
connections and impedance settings, firmware update, and network
connection capabilities.
Speaker Layout
The AV Receiver TX-NR6100 supports the following speaker
layouts:
- 3.1 Channel System
- 5.1 Channel System
- 7.1 Channel System
- 3.1.2 Channel System
- 5.1.2 Channel System
Speaker Connections
The AV Receiver TX-NR6100 supports speaker connections and
impedance settings. It also provides instructions for connecting a
power amplifier for European, Australian, and Asian models.
Connecting Other Devices
The AV Receiver TX-NR6100 provides instructions for connecting
various devices, including:
- TV
- Playback Devices
- AV Component with HDMI Jack Mounted
- Audio Component
- AV Component in a Separate Room (Multi-zone Connection)
- TV (ZONE 2)
- Integrated Amplifier (ZONE 2)
- Antennas
Product Usage Instructions: AV Receiver TX-NR6100
Firmware Update
Before starting the firmware update, make sure to check the
update information provided in the user manual. The firmware update
procedure includes the following steps:
- Turn on the AV Receiver TX-NR6100.
- Press the HOME button on the remote controller.
- Select “Hardware Setup” from the menu.
- Select “Firmware Update” from the menu.
- Follow the on-screen instructions to complete the firmware
update.
Reducing Power Consumption in Standby State
To reduce power consumption in standby state, check each setting
and set the following functions to Off:
- Network Standby
- HDMI Through
- HDMI CEC
- Auto Power Down
- Bluetooth Standby
Speaker Installation
Refer to the user manual for detailed instructions on speaker
installation and connections based on your chosen speaker
layout.
Connecting Other Devices
Refer to the user manual for detailed instructions on connecting
other devices, including TV, playback devices, AV components with
HDMI jack mounted, audio components, AV components in a separate
room (multi-zone connection), TV (ZONE 2), integrated amplifier
(ZONE 2), and antennas.
Playback
The AV Receiver TX-NR6100 supports playback of audio from
Bluetooth-enabled devices. Refer to the user manual for detailed
instructions on playing audio from Bluetooth-enabled devices with
this unit.
Note: The text “Obsah je uzamcen” means “Content is locked” in
Czech.
Instruction Manual
AV RECEIVER TX-NR6100
En
Table of contents Speaker Layout
Main Room
Zone 2
Speaker Connections
Firmware Update
Troubleshooting
Supplementary Information
Reducing the Power Consumption in Standby State
When the following functions are enabled, the power consumption in standby
state increases. To reduce the power consumption in standby state, check each
setting and set the functions to “Off”.
HDMI CEC ( p120) HDMI Standby Through ( p120) USB Power Out at Standby (
p127) Network Standby ( p127) Bluetooth Wakeup ( p128)
Detailed contents (Next page)
2
Before starting the procedure Firmware Update
Update Information of the firmware Firmware Update Procedure Part Names Front
Panel Display Rear Panel Remote Controller Inputting Characters
Speaker Layout
The listening room and the speaker layout 3.1 Channel System 5.1 Channel
System 7.1 Channel System 3.1.2 Channel System 5.1.2 Channel System
Speaker Installation
Speaker Connections
Speaker Connections and “Speaker Impedance” Settings Connecting a Power
Amplifier (For European, Australian and Asian models)
6 Connections
7
7 Connecting the TV
51
7
To ARC/eARC TV
51
10
To Non-ARC TV
51
10 Connecting the SUB Monitor
52
12
SUB Monitor
52
13 Connecting Playback Devices
53
15
Connecting an AV Component with HDMI Jack
Mounted
53
17
Connecting an Audio Component
54
Connecting an AV Component in a Separate Room
19 (Multi-zone Connection)
55
20
Connecting a TV (ZONE 2)
55
21
Connecting an Integrated Amplifier (ZONE 2)
56
22 Connecting Antennas
57
23 Network Connection
58
24 Connecting the Power Cord
59
Playback
AV Component Playback
61
Basic Operations
61
BLUETOOTH® Playback
62
31
Playing audio from BLUETOOTH wireless technology
enabled devices with this unit
62
49
3
Obsah je uzamcen
Dokoncete, prosím, proces objednávky. Následn budete mít pístup k celému
dokumentu.
Proc je dokument uzamcen? Nahnvat Vás rozhodn nechceme. Jsou k tomu dva hlavní
dvody: 1) Vytvoit a udrzovat obsáhlou databázi návod stojí nejen spoustu úsilí
a casu, ale i financní prostedky.
Dlali byste to Vy zadarmo? Ne. Zakoupením této sluzby obdrzíte úplný návod a
podpoíte provoz a rozvoj nasich stránek. Teba se Vám to bude jest nkdy hodit.
) Mozná zpocátku ano. Ale vzte, ze dotovat to dlouhodob nelze. A rozhodn na
tom nezbohatneme. 2) Pak jsou tady ,,roboti”, kteí se pizivují na nasí práci a
,,vysávají” výsledky naseho úsilí pro svj prospch. Tímto krokem se jim to
snazíme pekazit. A pokud nemáte zájem, respektujeme to. Urgujte svého
prodejce. A kdyz neuspjete, rádi Vás uvidíme!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>