HOSEOKA J6L001BS0M Night Stand with Charging Station and LED Lights Instruction Manual

HOSEOKA J6L001BS0M Night Stand with Charging Station and LED Lights

Product Information

Product Model: J6L001BS0M

This product is a multi-part item that requires careful installation. Please read the installation instructions before proceeding. If you have any questions or need assistance, please contact our professional after-sales team at [email protected].

Specifications

• Number of Parts: 12
• People Needed for Assembly: 1-2
• Tools Required: Flat Head Screwdriver, #2 Phillips Head Screwdriver, Hammer

Product Usage Instructions

Before You Start

1. Read through each step carefully and follow the proper order.
2. Separate and count all your parts and hardware.
3. Give yourself enough room for the assembly process.
4. Have the following tools ready: Flat Head Screwdriver, #2 Phillips Head Screwdriver, Hammer.
5. Caution: If using a power drill or power screwdriver for screwing, be aware of the speed and stop when the screw is tight to avoid stripping.

Helpful Hints

• Open your item in the area you plan to keep it to avoid excessive heavy lifting.
• Identify, sort, and count the parts before attempting assembly.
• Compression dowels should be lightly tapped in with a hammer.
• Slides are labeled with an R (right) and L (left) for proper placement.
• Make sure to always face the point on the top of the Cam Lock towards the outer edge.
• If there is a back panel in the package, please install it to ensure unit completeness and stability.
• Fix all the screws provided for the back panel to enhance product stability. If it is difficult to tighten, use a hammer to assist and then tighten.
• Do NOT use harsh chemicals or abrasive cleaners on this item.
• Never push, pull, or drag your furniture.

Board Identification

Part List

Cam Lock Fastening System
Insert the cam bolt into the hole first, then insert the cam lock and lock it.

Assembly

The assembly process can be made faster by using an electric screwdriver.

STEP 1:

STEP 2:

STEP 3:

STEP 4:

STEP 5:

STEP 6:

FAQ

• Q: How many parts are included in the product?
  A: There are 12 parts included in the product.

• Q: How many people are needed for assembly?
  A: 1-2 people are recommended for assembly.

• Q: What tools are required for assembly?
  A: Flat Head Screwdriver, #2 Phillips Head Screwdriver, Hammer are required for assembly.

• Q: Can I use a power drill or power screwdriver for screwing?
  A: Yes, you can use a power drill or power screwdriver, but be cautious of the speed and stop when the screw is tight to avoid stripping.

• Q: Can I use harsh chemicals or abrasive cleaners on this item?
  A: No, do NOT use harsh chemicals or abrasive cleaners on this item.

• Q: How should I handle the furniture?
  A: Never push, pull, or drag your furniture. Handle it with care.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>