BAMiNi Space Active Noise Cancellation Stereo Headphone Instructions

**BAMiNi Space Active Noise Cancellation Stereo Headphone Instructions

**

Specifications

Bluetooth Name: bamini space
Bluetooth chip: qcc3024
Bluetooth 5.0 ANC scheme: ADI ssm2000
Battery voltage and capacity: 3.7V 500mah
Charging current: About 350mA
Charging time: About 2H
Standby time: about 300h
Noise reduction value: about22-25db 500Hz
Horn unit: od4Omm
Communication: ECM 4015, – 42db ± 3dB
USB interface type: type-C
Audio interface type: 3.5mm

Instructions

Bamini headphones use a built-in voice control circuit that remains open to maximize the volume The value is controlled within 85 dB. This product is environmentally friendly, durable and durable. The decibel value is It is the United States, the European Union and many hearing health organizations including who Recommended level (safe Volume 85 dB).

POWER ON 00.03
POWER OFF 00,05

power switch

Power on: press and hold the power button for 3 state (initial power on: earphone in)Enter pairing start up and enter the connection back)
Power off: press and hold the power button for 5 boot state
Start ANC: Toggle the ANC switch
On: noise canceling off: off

75db blue light
85db purple light
94db red light, once every 5 seconds

Volume switching 75db / 85db / 94db : After the connection is successful, click (volume + and volume -) at the same time to complete the switching

Red blue alternating flash

Enter manual pairing mode:
After the device has been paired, press and hold the power on button for 5 seconds to enter forced pairing Time 90 seconds

Play / pause:
Previous song: long press volume 4- next song; long press volume-Volume +: click volume + volume -: click volume
Play status: play / pause. Click the multifunction key to play/pause

Low power: when the equipment is connected, when the voltage is lower than 3.3V. it will give a low power prompt(report once every 30 seconds)

Charging completion: when the headset Is In the charging state of the charging bin, it is fully charged at 4.2V, and then fully charged The red light goes out and the blue light stays on

Power display: when the device is connected, Bluetooth is connected and the power is displayed(some devices do not support this function)

Two headphones in total:
Audio cable link (main headset Bluetooth Ink device, shared headset off Link audio cable sharing)

Long listening reminder:
One hour after wearing the headset, the prompt is ‘relax’, (red, blue and purple [red and blue are on at the same timaApurple) cycle flash) for 10-15 seconds every 5 minutes.

Two hours after wearing the headset. the prompt ‘relax againTM. (red. blue and purple The light is purple] cycle flash) for 10-15 seconds every 5 minutes.

be careful

• the earphone is not waterproof and shall not be soaked or splashed by water;
• do not use this product at extreme temperatures;
• do not open the internal structure of the headset without any parts that need to be maintained by the user. lf it is opened, the warranty of this product is invalid.
• earphones can only be cleaned with a soft dry cloth, and any cleaning with burrs is not allowed articles.
• do not use this product when you need to concentrate on driving, cycling, etc.
• this product is not suitable for high power amplfier, please use this product with care.

COMPLIANT

Comply with the EU directive ‘restrictions on the use of certain hazardous substances”, which limits Manufacture and use certain hazardous materials and products to protect the environment.

This product is marked with CE and complies with rohs2011 65 EU directive Provisions.

Household equipment abandonment Guide

Many electronic products can De repaired or recycled to save natural resources and protect the environment Protect the environment. If not recycled, the electronic equipment will eventually be dumped in the landfill Buried site, resulting in leakage of harmful substances, resulting in soil and water pollution, from And endanger wildlife and human health. Do not set any electronic devices Ready to throw into the dustbin. Many local authorities place containers to collect batteries Recycling. Public buildings and your workplace may also have such containers. The battery will eventually be dumped in the landfill, resulting in the leakage of harmful substances, Cause soil and water pollution, thus endangering the health of wildlife and human beings Kang, Electricity containing harmful substances such as mercury (Hg), cadmium (CD) or lead (PS) The pool is also marked with chemical symbols. This symbol indicates that according to local law According to the regulations, the battery shall be treated separately from domestic waste. When the product is ready for use At the end of its life, it shall be taken to the collection point or place designated by the local authority Return to the place of purchase for recycling or disposal.

OBAMiNi CO., LTD. BAMiNi Is a registered trademark, see http://barnini.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>