HAMPTON BAY LED Willow Curtain Lights User Guide

HAMPTON BAY LED Willow Curtain Lights User Guide

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of these LED Willow Curtain Lights. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Safety Information

WARNING: To reduce the risk of injury, read and understand the owner’s manual before using this product.

WARNING: Failure to observe the following safety rules may result in FIRE, ELECTRICAL SHOCK, OR INJURY.

For your safety, always remember to:

• Please retain manual and packaging for future reference as these contain important information.
• To avoid risk of fire, burns, personal injury, and electrical shock, product should not be placed within reach of small children.
• Do not operate in vicinity of gas, electric heaters, open fire, candles, or other heat sources.
• Check for damage prior to each use of the product.
• LEDs are not replaceable.

Pre-Installation

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part

| Description|

Quantity

---|---|---

AA

| Willow Curtain Lights| 1
AA1| Light Control Box (Attached to the Willow Curtain Lights)|

1

AA2

| Willow Curtain Fastener (Attached to the Willow Curtain Lights)| 1
BB| AC Power Adapter|

1

NOTE: To prevent strands from tangling during installation, , do not remove wire ties until the main cord is securely mounted.

Installation

1. Connecting the AC Power Adapter

   • Connect the Willow Curtain Lights (AA) two-prong plug to the AC Power Adapter (BB).
     NOTE: Only use the included AC Power Adapter (BB).
     

2. Securing the AC Power Adapter

   • Use the Willow Curtain Fastener (AA2) to secure the Willow Curtain Lights (AA) two-prong plug to the AC Power Adapter (BB).
     

3. Securing the Main Cord

   • Without untying the vertical strands, hang the horizontal main cord of the Willow Curtain Lights (AA).
     

4. Expanding the Willow Curtain Lights

   • Once the main cord is secure, untie and unfurl the vertical light strands of the Willow Curtain Lights (AA).

5. Powering the Willow Curtain Lights

   • Connect the AC Power Adapter (BB) to the power supply.?

Operation

1. Turning on the Willow Curtain Lights

   • Click the button on the Light Control Box (AA1) to turn the Willow Curtain Lights (AA) ON.
   • The unit will automatically enter the first of the eight (8) light modes.
     

2. Choosing a Light Mode

   • Continue to click the button on the Light Control Box (AA1) to cycle through each of the eight (8) light modes.
   • After cycling through the eight (8) light modes, the next function is off, which will turn the Willow Curtain Lights (AA) OFF.

Willaw Curtain Light Modes

Combo| Cycle through the below effects every 30 seconds.
Twinkle| Create a firefly twinkle effect.
Order| Lights alternate ON/0FF in sequence.
Glow| Lights randomly dim up and down.
Chase| Fast alternate blinks, creating a chase light effect.
Fade| All lights dim up and down simultaneously.
Flash| Intermittent strobe effect between lights.
Solid| All lights 0N at the same time.
Off| Turn off all lights.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party: Feit Electric Company 4901 Gregg Road,Pico Rivera, CA 90660, USA, 562-463-2852
Unique Identifier: FY10-120/WILLOW/HD

Limited Warranty

This product is warrantied to be free from defects in workmanship and materials for up to one year from date of purchase. If it fails to do so, please contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

Support

Questions, problems, missing parts?
Before returning to the store, call Hampton Bay Customer
Service 8 a.m. – 7 p.m., EST,
Monday -Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>