BYECOLD BKD-G0606-WLH D Smart Mirror Instruction Manual

BYECOLD BKD-G0606-WLH D Smart Mirror

READ BEFORE USE

• Thank you for purchasing this Byecold product.
• Please read the instructions carefully before attempting to install, operate or service the product.
• Please retain this booklet for fu ture reference.
• Pictures for referen ce only, subject to our available products

SCOPE OF DELIVERY

• A: S mart Mirror × 1
• B: Screw × 4
• C: Dowel × 4
• D: Drill t emplate × 1
• E: Manual × 1

PRODUCT INTRODUCTION

Byecold smart mirror is a bathroom wall mirror with some utility functions include displaying weather/calendar/temperature & humidity, LED illuminant, and defogging function etc. Users can select the product with different functions according to the different needs. Please ign o re the related operating instructions in t his bookle t if you didn’t subscribe some functions.

SAFETY INTRODUCTION

Read this manual carefully before starting or using the device. Always store the manual in the immediate vicinity of the device or its site of use!

Warning: Do not ceiling mount those devices designed for wall only! Or else it may cause burning, fire and falling off risk!
Warning: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Warning: Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
Warning: Do not use the device in small rooms if persons are present who cannot leave the room independently and who are not under constant supervision.
Warning: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. Its dangerous of installation close to curtains and other combustible materials. To avoid the possibility of burns, the following people should be much more careful wh e n using the heaters: infants and kids, people with sensitive skin, the old, the sick, people who is drunk, people who takes sleeping pills.

• Remove all the blue protective films(both on the front and on the back) before using
• Be sure the usage voltage is between 220 240V, 50Hz, and power supply has been strictly in accordance with IEC, left is null wire and right is live wire, and also well grounded.
• The devices will draw more current than small appliances, so a separate 5A socket is required.
• Do not use the device in potentially explosive rooms.
• Do not use the device in aggressive atmosphere.
• Set the device up in an upright and stable position.
• Let the device dry out after a wet clean. Do not operate it when wet.
• Do not use the device with wet or damp hands.
• Do not expose the device to directly squirting water.
• Never insert any objects or limbs into the device.
• Do not cover or transport the device during operation.
• Do not sit on the device.
• This appliance is not a toy! Keep away from children and animals. Do not leave the device unattended during operation.
• Check accessories and connection parts for possible damage prior to every use of the device. Do not use any defective devices or device parts.
• Ensure that all electric cables outside of the device are protected from damage (e.g. caused by animals). Never use the device if electric cables or the power connection are damaged!
• The electrical connection must be according to the specifications in chapter Technical data.
• Insert the mains plug into a properly secured mains socket.
• Do not use the device when the socket or wire overloaded.
• Observe the device’s power input, cable length and intended use when selecting extensions to the power cable. Completely unroll extension cab l es. Avoid electrical overload.
•  Before carrying out maintenance, care or repair work on the device, remove the mains plug from the mains socket. Hold onto the mains plug while doing so.
• Switch the device off and disconnect the power cable from the mains socket when the device is not in use.
• Do not under any circumstances use the device if you detect damages on the mains plug or power cable. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Defective power cables pose a serious health risk.
• During the installation of the device observe the minimum distances from walls and other objects as well as the storage and operating conditions specified in the Tech n ical data chapter.
• Never drill into the heating device
• Do not use the device once any damage found on the glass or mirror surface.
• Do not use the device in immediate proximity to curtains.
• Do not place the device on combustible ground.
• Do not transport the device during operation.
• Do not touch the surface during the device working to avoid burns.
• Allow the device to cool down before transport and/or maintenance work.
• Do not use this device near bathtubs, shower trays, swimming pools or other water containers. Risk of electric shock!
• The device must be placed where the switches and controllers cannot be touched by a person in a bathtub or shower.
• Do not use this device in a child care centre and bathroom.(Only for Sweden)
• Do not place any objects, e.g. clothing, on the device.
• Do not use the device outdoors. Do not place the device on wet or flooded ground.
• Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable.
• Do not stretch the cable or place the cable under strain.
• Keep cable away from heated surfaces.
• Do not run the cable under carpeting. Do not cover the cable with throw rugs, runners, or similar coverings. Do not route the cable under furniture or appliances. To avoid a tripping hazard arrange the cable away from traffic areas so that it will not be tripped over.
• Do not use on soft surfaces, such as a bed, where openings may become blocked.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains, at least 0. 9 m (3 feet) from the front of the appliance and keep them away from the sides and rear when the appliance is plugged in.
• If there is a loose fit between the plug and the socket or the plug becomes very hot, the socket may need to be replaced. Check with a qualified electrician to replace the socket.
• Turn off all controls before unplugging. Unplug before connecting any tool or accessory.
• Allow the device to cool down before transport or maintenance work.
• Do not privately disassemble the device or replace parts, otherwise it may cause mechanical failure, electric shock, fire or body injury.
• The warranty is not applicable for the product fault caused by private disassembly.

PRODUCT INFORMATION

TECHNICAL DATA

Note : Heating and Defogging functions should be mutually exclusive.

STRUCTURE

INSTALLATION

1. Choose the mounting position, keep the required minimum distances.
2. Mark the positions for the bore holes onto the drilling template (D) if there are no existing marks. Stick the drilling template on the wall.
3. Drill the holes. Insert the screws into the dowe ls and fasten the screws. The screws should protrude approx.1.5 cm from the dowels
4. Tear off the back protective film Hang the mirror (A) on the screws and move it to one direction.

Note : please tear off the front and back protective film once you start using the device.

OPERATION

START UP

1. Check if the power cord is intact
2. Check if the power supply voltage is consistent The power socket is required to have a grounding terminal and good grounding performance
3. Whether the power cord plug and s ocket are matched, the socket can withstand 110 240V/5 0HZ, 10A. If it is lower than this value, it cannot be used to avoid accidents.

FUNCTIONAL OPERATING INSTRUCTIONS

1. Plug in power, the backlit of the touch button is in the active (lighted white) status Single click the touch button the surrounding LED lights up; Single click again, the light goes off (If the LED lighting is not selected when ordering, click the touch button is invalid)
   Note : An updated item has two brightness modes, you can switch to 3000K or 6000K with pressing the switch on blackbox at mirror back right picture.

2. Double click the touch button, the weather display screen is turned on; Double click again to close. close.(If the weather display is not selected when ordering, double click the touch button is invalid)
   Note : Wether display needs to be configured in advance, please check the following instruction.

3. Long press the touch button to turn on the heating or defogging function, the white backlit of the touch button changes to blue; Long press again to turn off heating/defogging. defogging. (If the function of heating or defogging is not selected when ordering, Long press the touch button is invalid)

WEATHER DISPLAY OPERATING INSTRUCTIONS

1. Make sure that your router, phone and the mirror are as close as possible during the process of WIFI connecting; Make sure that the mirror can get good WIFI coverage after mounting; and Make sure that the smart phone are connected to the 2.4Ghz WIFI network invariably during the following configuration process.

2. Scan the QR code of the following figure (1) and install the APP according to the prompts;
   Note : This QR code only supports Android system. For IOS system, please search and install the APP named“WifiClock” in App Store.

3. After the app has been successfully installed, find the WifiClock A pp icon on the mobile phone desktop and click it, as shown in above figure (2);

4. After opening the app, the following interface is displayed, click to add a WIFI clock;

5. Double click the touch switch to turn on the dis play interface, display as SCAN or SCAN AP status. As shown below;
   Note : Plug and unplug the power supply for six times to switch to different mode.

6. 1. If the mirror display is showing SCAN, then go into EZ MODE in W ificlock App, select the WIFI hotspot and enter the wireless password T he device only supports for 2.4G hz network)network),click Next , then Confirm the SCAN and WIFI are flashin g. The mirror screen will display SCAN JOIN PAIR in turn during the configuration pro cess, waiting for about 120 seconds to finish.

7. If the mirror display is showing SCAN AP , then select AP MODE at top right corner in Wifi clock App, select the WIFI hotspot and enter the wireless password T he device only supports for 2.4 G hz network)network),click Next, then Confirm the SCAN and WIFI are flashing. Then Click To connect to find a hotspot named “WifiClock x xxx” and enter password to connect, then click Back to wait for WIFI connecting, waiting for about 120 seconds to finish. The mi rror screen will display SCAN AP JOIN AP PAIR AP in turn during the configuration process.

8. After a successful pairing, the following interfaces are displayed in App a nd Mirror Display Screen, respectively. A mobile phone can add several WIFI clock terminals.)

9. For each WIFI clock device, you can make the following settings

10. Basic setting: You can set the switch button sound. This button sound refers to whether the buzzer inside the mirror is buzzing when the phone is operated. 24 hours/12 hours display selection; day and month mode selection; temperature unit selection; digital tube display brightness adjustment on the mirror.

11. Alarm setting: Users can set several groups of alarms through the mobile phone. The buzzer alarm inside the mirror will ring when the timer goes off.

12. Weather setting: After the weather scroll screen is turned on, the screen will scroll the weather of the day and tomorrow (d2); the area setting is used to select the area where the weather is to be displayed. The default is automatically set to the local area where the network IP belongs. If the automatic positioning is not successful, you need to manually set the area; server selection means that if the user finds that the displayed weather is quite different from the actual weather, you can replace another server to get a more accurate weather display; today’s weather selection refers to whether the screen display is real time weather or the total forecast of the day.
    Note : The weather information source of this APP application is from internet, and it may not be updated in time.

13. Sleep mode: Refers to setting the digital light screen display timing the screen system will automatically reduce the brightness during sleep to achieve the purpose that energy saving or not affect the user’s sleep;

14. Firmware version: Refers to the current software version, the system will automatically update the version if necessary;

15. Delete device: Refers to the mobile phone is no longer connected to the device, after deleting, you need to restart the connection.

16. If WiFi hotspot change or password change, you need to restart the device to reconnect. The specific operation is to cut off the total power supply four times. Each power on needs to hear the Patter ” inside the mirror before the next power off. After four power offs, double click the touch switch to turn on the screen. The SCAN status is displayed and set up by the mobile phone

17. The device displays 11 different icons, including sunny, overcast, cloudy, light rain, heavy rain, thunderstorm, shower, light snow, heavy snow, sleet and haze/fog. The icons is shown in the following table:

MAINTENANCE

• The appliance must be switched off and unplugged before taking regular cleaning. Otherwise, it may cause electric shock.
• The appliance needed only external cleaning and care regularly.
• Please use some medicinal alcohol clean the surface with damped soft cloth. Never clean it under running water. Do not use thinner, toluene, benzene, acidic/alcoholic cleaning agents, or any chemical clothes on the appliance.
• After regular care and cleaning, well pack it into the original packing box, then put it to dry and cool environment for storage.
• Wind and keep dry the cable when not in use.

TROUBLESHOOTING

The device has been checked for proper functioning several times during production. If malfunction occur nonetheless, check the device accord ing to the following list.

connection

2） Use fingerprints instead of fingertips

The surface bulges slightly| The material expands due to

heating

| It’s a normal process. No measure are

required.

Indoor Temperature / humidity are displayed inaccurately|

The sensor maybe covered

| Make sure that the senor is placed at a right position, should not be covered or touched

by other materials.

The device is unable to connect WIFI| Wifi signal is poor or network

failures

| Restart the router and device.
---|---|---
The real-time weather is displayed

inaccurately

| weather data is not updated| Connect another sever in your APP.

Display code Err

| The device failed to connect to configured  network,  and the

previous data   already expired.

| Restart your router, make sure that the wifi signal strength as good as enough
Display code 05| The    configured          router           is

connected to too many devices

| Replace another router or reduce connected

devices.

Display code 201

| The   configured         network       is unreachable or . WIFI hotspot

is replaced

| Make sure the device, Wi-Fi router and the smartphone closer together.

Refer to Step 8-(7).

Please follow the steps below to diagnose wifi connection issues:

Important Notes

• A. In the process of connecting, routers, phones and devices should be as close as possible.
• B. The device only supports 2.4G hz wifi network your smart phone should connect to 2.4Ghz network during setting. Sometimes the 5Ghz network will affect the connection due to frequency interference. So the best way is to separate the SSID during setting.

DISPOSAL

The icon with the crossed out waste bin on waste electrical or electronic equipment stipulates that this equipment must not be disposed of with the household waste at the end of its life. You will find collection points for free return of waste electrical and electronic equipment in your vicinity. The addresses can be obtained from your municipality or local administration. The separate collection of waste electrical and electronic equipment aims to enable the reuse, recycling and other forms of recovery of waste equipment as well as to prevent negative effects for the environment and human health caused by the disposal of hazardous substances potentially contained in the equipment.

References

• Home
• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>