BONTEC FN-411 Mobile TV Cart User Manual
- June 16, 2024
- BONTEC
Table of Contents
BONTEC FN-411 Mobile TV Cart
Component Checklist
INSTALLATION
-
STEP 1 Install the support foot and caster on the base.
-
STEP 2 Install the column on the base
-
STEP 3 Install the DVD tray bracket on the post.
-
STEP 4 Adjust the inner column to the appropriate height.
-
STEP 5 Install the TV board on the column.
-
STEP 6 Mounting the Monitor Brackets to a TV.
First of all, Once you have determined the correct diameter,please see the diagram as below. You will thread the Bolt into the TV using the correct Washer, and using the spacer if necessary. Please make sure the Monitor Brackets are vertically centered and level with each other. -
STEP 7 Attaching TV To TV Plate and Managing the Wires.
UNPACKING INSTRUCTIONS
- Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
- Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts.
- Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
- Install and operate this device with care. Please read this instruction before beginning the installation, and carefully follow all instructions contained herein. Use proper safety equipment during installation.
- Please call a qualified installation contractor for help if you:
- If you don’t understand these directions or have any doubts about the safety of the installation.
- If you are uncertain about the nature of your wall, consult a qualified installation contractor.
- Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>