RTOPS W104 Magnetic Wireless Charger User Manual
- June 16, 2024
- RTOPS
Table of Contents
W104 Magnetic Wireless Charger
User Manual
W104 Magnetic Wireless Charger
（Please read the user manual carefully before using the product）
Compatible Device
-
Magnetic Wireless Charging:
For iPhone:iPhone 14,iPhone 14 Max,iPhone 14 Pro,iPhone 14 Pro Max, Phone 13 mini,iPhone 13,iPhone 13 Pro,iPhone 13 Pro Max,iPhone 12 mini, iPhone 12,iPhone 12 Pro,iPhone 12 Pro Max.(Compatible with official MagSafe cases) -
Wireless Charging:
For Earbuds: AirPods Pro, AirPods Pro with MagSafe,AirPods (3rd generation), Airpods 2(Must place on the right place)
Package Contents
- 1 X Magnetic Wireless Charger
- 1 X USB-A to USB-C Charging Cable
- 1 X 18W Adapter
- 1 X User Manual
How to charge for the phone
Product Specifications
Model：W104
Input：5V/3A 9V/2A
Output：7.5W/5W
Charging distance： 2-6mm
How to use the phone stand
(Only work with iPhone 12/13/14 series)
Reminder
- Magnetic fast charging only support iPhone 12/13/14 series.
- When charging Apple devices,the maximum power is 7.5W.
- Please remove the cellphone/earbuds case before charging.
- No metal or magnetic objects around 6cm of the back center of the phone during charging.
- Ensure your phone protective case with magnetic suction function, otherwise the phone could easily fall off from wireless charger.
- The lower temperature,the faster charging speed.The charging speed is faster in winter than in summer.
- Don’t use or place the product at high temperature or expose directly to the sun.
- Don’t immerse the product in water or near ignition sources.
- When the function temperature exceeds 104 ℉, the charging will be interrupted to avoid damage to the cellphone/earbuds battery.
FAQ
– [Battery] – [Battery Health] – [Turn off battery optimization].Troubleshoot1. When the phone or earbuds cannot be fully charged, try the following: Open [Settings] – [Battery] – [BatteryHealth] – [Turn off battery optimization].2. When the blue light flashes, indicating abnormal charging, please check whether peripheral are around.3. When the wireless charger stops charging, please reassemble the product and try it again.” image-3=”” count=”4″ html=”true” css_class=””]
Troubleshoot
- When the phone or earbuds cannot be fully charged, try the following: Open [Settings] – [Battery] – [BatteryHealth] – [Turn off battery optimization].
- When the wireless charger stops charging, please reassemble the product and try it again.
ANY OTHER QUESTIONS?
Please contact the product support team to get quick technical support.
Product Support: 18 months
Your satisfaction is always our top priority.Please feel free to contact us
through the following steps:
- Log in to your Amazon account
- Open your purchased orders
- Click the store name next to “Sold by:”
- Click “Ask a question”
The product support team
email:[email protected]
About the FCC:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules, operation is subject to
the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur ina particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on.
The user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Designed in the U.S.
Made in China