W203RTOPS 2 in 1 Magnetic Wireless Charging Station Instructions
- June 9, 2024
- RTOPS
Table of Contents
W203RTOPS 2 in 1 Magnetic Wireless Charging Station Instructions
Packing List
2-in-1 Wireless Charger
18W Adapter
USB-A to USB-C Charging Cable (1m)
Product Description
Specification Yield
- Model : W203
- Input: 5V/3A 9V/2A
- Output: 10W/7.5W/5W/2.5W (For iWatch)
Compatible Models
-
1. For iPhone
iPhone 14,iPhone 14 Plus,iPhone 14 Pro,iPhone 14 Pro Max,iPhone 13,
iPhone 13 Pro,iPhone 13 Pro Max,iPhone 13 mini,iPhone 12,iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max (Compatible with MagSafe cases) -
For AirPods
AirPods 2,AirPods 3,AirPods Pro,AirPods Pro 2 -
For iWatch
iWatch 2/3/4/5/6/SE/7/8/SE 2/Ultra
ANY OTHER QUESTIONS
Your satisfaction is always our top priority. Please feel free to contact us through the following steps:
- Log in to your Amazon account.
- Open your purchased orders.
- Click the store name next to”Sold by:” 4.Click”Ask a question.”
How to Use the Products
-
Charge the iPhone: Connect the charging head to the wireless charging input Type-C port, the wireless charging indicator blue light is on for 3 seconds. The wireless charger enters standby state, put the iPhone in the wireless charging area, the indicator light is blue and always on, indicating that the iPhone is charging normally. The iPhone is full, the blue light is off, if the iPhone is charging abnormally, the blue light flashes rapidly.
-
iWatch charging: Please put the iWatch module up and place the iWatch in the wireless charging area of the iWatch to align with the magnet, you can see the charging indication of the iWatch display light up. The charging indication on the iWatch display lights up, indicating that the iWatch is charging normally.
Warm Tips
Please pay attention to the following issues, otherwise it may cause irregular charging, high charging temperature, intermittent charging, or even no charging.
- Not compatible with devices other than Apple, such as Samsung.
- Please place your iPhone/iWatch/AirPods in the correct charging area.
- The charging distance is 2-8 mm, please do not wear a protective cover thicker than 3 mm.
- No metal or magnetic objects in the center 6 cm of the back of the iPhone during charging.
- The lower the temperature, the faster the charging speed.
- Charging speed is faster in winter than in summer.
- Please do not charge in a hot and humid environment to avoid damaging the circuit.
- Please put it out of reach of children to avoid unnecessary accidents.
- Make sure to use the original charging cable and adapter.
About the FCC
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules operationis subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received including interference that may cause undesired operation.
FCC Warning:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the Wits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and if not installed and used in accordance
with the instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Customer Service Email
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>