Linke SL-FL05-A 30W Solar Light User Manual

June 16, 2024
Linke

Linke SL-FL05-A 30W Solar Light

Linke SL-FL05-A 30W Solar Light

Thank You!

Thank you for purchasing Linke products. To ensure a better shopping experience, please follow the instructions for use step by step.
If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.

Email : linkebsservice@163.com
service@linke-ledlight.com

Attention

  1. The luminaire should be placed in suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.

  2. The light source is not replaceable, when it reaches the end of its life, the whole luminaire needs to be replaced.

  3. Because the solar panel is charged during the day, ii will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otherwise the light will flicker with high frequency)

  4. The working time of the lamp is related to the charging time. The charging effect on a sunny day will be better than that on a rainy day. In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge 8H when the sunlight is sufficient, the lamp will turn on again.

  5. Please install the solar panel in a place that can get sufficient sunlight.
    Note that the place like tree shade or glass will affect the charging effect.

  6. When you receive the product for the first lime, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.

  7. Please clean the solar panel regularly to ensure the charging effect.

  8. Do not disassemble and modify the product by yourself to avoid product damage.

  9. Please stay away from fire sources. The waterproof rating of this product is IP66. Do not use ii in water.

Parameter

Model| Solar Panel| Working Voltage| Color Temperature| Lighting Angle| -Projection

Distance

| Waterproof Rating| Extension Cord| Control Method| Lamp body Material| Ta
---|---|---|---|---|---|---|---|---|---|---
SL-FL05-A| 6V/4W| 3V/DC| 2700K/4000K/6000K| A1| A2| A1| A2| IP66| SM| Light Control| PC| -25 C-40 C
120°| 25°| 3M| SM
SL-FL05-B| 6V/3W| 3V/DC| 2700K/4000K/6000K| 120·| 3M| IP66| SM| Light Control| PC| -25 C-40 C
SL-FL03-A| 6V/4W| 3V/DC| 2700K/4000K/6000K| 25°| SM| IP66| SM| Light Control| PC| -25 C-40 C
SL-FL03-B| 6V/4W| 3V/DC| 2700K/400K/6000K| 120·| 3M| IP66| SM| Light Control| PC| -25 C-40 C

Product models/size/accessories

Product models/size/accessories
Product models/size/accessories
Product models/size/accessories

Solar panel installation

  • Ground-mounted

  • Wall mounted

Note : The solar panel needs to be installed in a place where there is sufficient sunlight. The installation location like tree shade or glass will affect the charging effect.

Flood light installation

  • Ground-mounted
    Flood light installation

  • Wall mounted

How to install (SL-FL03)

Step 1 : Drill two holes on the installation wall (the position of the holes refer to the installation holes of the installation base).
How to install \(SL-FL03\)

Step 2: Drive in bolts and screws to fix the mounting base on the wall.
How to install \(SL-FL03\)

Step 3: Turn on the switch of the lamp, set the mode and angle of the lamp, and then tighten the screw to fix the lamp on the mounting base.
How to install \(SL-FL03\)

Wiring guide

Connect the male and female ends of the ex1ension cord and lighten the waterproof cap.
Wiring guide

Light control working mode

  • Charge during the day

  • Lights up at night

Product details

Product details

Light control switch function:

  1. Left button:
    ON/OFF: Press once to turn on (default low light mode}-press again is high light mode-press again to turn off (low light-high light-off)

  2. Right button:
    Color temperature switch:
    press the switch 2700K-4000K-6000K in cycle.

Working indicator light:

Left light 1:
indicator: Green light on indicates that the power supply is nominal, and off light indicates that the battery is not supplying power.
Left lights 2: high/low light mode indicator: green light on means high light mode, off light means low light mode.
Left lights 3 : solar panel indicator: red light on means that the solar panel is charging normally, the light off means that the solar panel is not charging.

Battery indicator light:

Right light 1: green light on, about 100% power
Right light 2: green light on, about 70% power
Right light 3: green light on, about 30% power

FAQ

Q: The lamp doesn’t work.

A: 1. Make sure the lamp is switch on.
A: 2. The battery is out of power, please charge the battery by solar panel in direct sunlight.

Q: Lighting time is short.

A: 1. The working time depends on the power which stores in the rechargeable battery. {The battery can only be fully charged in a sunny environment)
A: 2. The more power ii charges during the day, the longer lime ii works during the night.

Q· Charming time

A: Charging for over 8 hours is recommended. The solar product’s charging lime is affected by weather condition and installation location.

Q: Working hours.

A: When the battery is fully charged, light control type: work for about 6 hours in high light mode, and about 12 hours in low light mode.

Warning

  1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
  2. Do not stare at the LED light-emitting surface closely for a long lime to prevent the hurt to the eyes.
  3. Under no circumstances should the luminaire be covered by a themnal pad or similar material.

Symbols
Company name: Shenzhen Oumei ke Lighting Technology Co., Lid.
Address: No. 19-20,Anye Road, Yuanshan Street, Longgang District, Shenzhen, Guangdong, China (+86 0755-28608199)

 C&E Connection E-commerce (DE) GmbH
Zurn Linnegraben 20, 65933, Frankfurt am Main, Germany
E-mail : info@ce-connection.de Tel:+49 (069) 27246648

 CETPRODUCT SERVRCELTD.
Beacon House Stokenchurch Business Park, Ibstone Rd, Stoken church High Wycombe HP14 3FE UK Tel:+447419325266 E-mail: info@cetproduct.com

Customer Support

http://www.linke-ledlight.com
E-mail: linkebsservice@163.com
E-mail: service@linke-ledlight.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals