Linke B04-22SL-TY01-L-B Solar Shed Light Outdoor Indoor Instruction Manual

Linke B04-22SL-TY01-L-B Solar Shed Light Outdoor Indoor

Instruction

• Thank you for purchasing Linke products. To ensure a better shopping experience, please follow the instructions for use step by step.
• If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first lime and resolve any problems about the products.
• Email : llnkebsservlce@163.com

Attention

1. Because the solar panel is charging during the day, the light control mode will not light up during the day, if you want to test the product during the day, please disconnect the solar panel connection cable or cover the solar panel with an object to simulate the night environment.
2. The working lime of the light is related to the sunlight charging time, sunny day charging effect will be better than the rainy day. such as continuous rainy weather, the light may not be turned on because it’s not charged , but wait for the sunlight is sufficient, it will be charged and light up again.
3. Please install the product in a place with sufficient sunlight, note that the place like tree shade or glass will effect the charging effect.
4. When you received the product for the first time, please fully charged in full sunlight before using it (at least 8 hours or more), to ensure the duration of the light.
5. Please clean the solar panel regularly to ensure the charging effect.
6. Please do not disassemble and modify the product by yourself to avoid product damage.
7. The product contains batteries, please keep away from fire.

Parameters Table

Product models

Component and Structure Diagrams

1. Metal Hook
2. Type C Charging Port
3. Lamp Panel
4. Shell
5. On/Off Button
6. Battery
7. Motion Sensor
8. Lampshade with Lens

Solar panel installation

Note : The solar panel needs to be installed in a place where there is sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.

Installation Diagram

How to Work

Function Description

1. Power Switch: Need to be turned on before use. When turned on, the work indicator lights up green
2. Type C Charging Port: It can be charged with a USB – cable when the sun is not full

Indicator Meaning

1. Power on Indicator: Steady green Indicates that the power supply is connected
2. Charging Status Indicator: If the red light is on, ii indicates that the battery is charging. If the light is not on, it indicates that the battery is not charging
3. Operating Mode Indicator: Tum on light control mode, the green light fiashes once and then goes off Press the Induction mode button to turn on induction Mode  T
4. The green light flashes once and then keep on. Press the induction mode button again to tum on induction Mode
5.  Al this lime, the green light flashes twice, and then keep on.
6. Battery Level Indicator: If one light is steady on, the battery capacity is about 30%. If two lights are steady on, the battery capacity is about 70%. If three lights are steady on, the battery capacity is about 100%

Remote Control Introduction

• Mandatory light on 2 hours at 85% brightnesss output (in full battery
• condition), day or night. (SJ Light control mode: Press this button to switch the light control
• mode, and the lamp will be automatically lit at night at 50% of the full brightness
• Induction Mode 1: When sensing people at night, the lamp will automatically tum on at full brightness, and will automatically tum off about 30 seconds after people walk away.
• Induction Mode 2: Low brightness lighting at night when no one is around. Once the person is sensed, the lamp is fully illuminated.
• About 30 seconds after the person leaves, the lights are lit at a low brightness level.
• Steeples color temperature adjustment button”-“: hold the button, color temperature will change from high to low, release ii to display the current color temperature
• Stepless color temperature adjustment key”+”: hold the button, color temperature will change from low to high, release the key to display the current color temperature 8819 Press the corresponding color temperature key to adjust the color temperature. You can choose 2700K,4000K, or 6500K

Note : The following functions are used in light control mode, induction mode is not applicable

Warning

1. There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
2. Do not stare at the LED light-emitting surface closely for a long lime to prevent the hurt to the eyes.
3. Under no circumstances should the luminaire be covered by a thermal pad or similar material.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>