Linke B04-21CPD LED Solar Spot Light Outdoor Garden User Manual
- June 14, 2024
- Linke
Table of Contents
Linke B04-21CPD LED Solar Spot Light Outdoor Garden
- Thank you for purchasing Linke products. To ensure a better shopping experience, please follow the instructions for use step by step.
- If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.
Email : linkebsservice@163.com service @linke-ledlight.com
Attention
- The luminaire should be positioned at suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.
- Because the solar panel is charged during the day, it will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otherwise the light will flicker with high frequency)
- T he working time of the lamp is related to the charging time. T he charging effect in a sunny day will be better than that in a rainy day. In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge 6-8H when the sunlight is sufficient, the lamp will turn on again.
- Please install the solar panel in a place with sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.
- When you receive the product for the first time, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.
- Please clean the solar panel regularly to ensure the charging effect.
- Do not disassemble and modify the product by yourself to avoid product damage.
- Please stay away from fire sources.
- The waterproof rating of this product is IP66. Do not use it in water.
Product Parameters
How It Works
- The spotlight can be automatically on 30s when detecting motion at night, sensing distance is 0-5M
Product Size and Switch Details
Light control model
Working indicator light:
- Left light 1 -power indicator: Green Licht on indicates that the power supply is nolTllal, and off light indicates that the battery is not supplying power.
- Left lights 2 – high/low light mode indicator: green light on means high light mode, off light means low light mode.
- ( Note : The sensor light model does not have this function)
- Left lights 3 – solar panel indicator: red light on means that the solar panel is charging nolTllally, the light off means that the solar panel is not charging.
Battery indicator light
Right light
- green light on, about 100% power Right light
- green light on, about 70% power Right light
- green light on, about 30% power
Product Switches and Settings
- Product Switches and Settings
- Color Temperature Modes: 2700K, 4000K,6000K
Primordia
Working mode indicator
- Left light 1: Light control mode is turned on when the machine is turned on, and the indicator “1” lights up at the same time.
- In this mode, the lights automatically tum on at night without sensing motion.
- Left light 2: After the light control mode-shutdown cycle, pressing the power button will enter sense control mode. At this time, the indicators “1· and “2” are lit at the same time.
- In this mode, when people pass by at night, it will automatically turn on, and after 30 seconds of lighting, it will automatically turn off.
- Left light 3: Charging indicator, red light on means that the solar panel is charging normally, the light off means that the solar panel is not charging.
Battery indicator light
Right light
- green light on, about 100% power Right light
- green light on, about 70% power Right light
- green light on, about 30% power
Product Switches and Settings
power off
Note : In the light control mode, the left indicator 1 is on; in the
sensing mode, the left indicator are both on. Installation Step
Stick into ground
Spikes installation
-
first connect the three spikes, then connect the spike and lights with the fixing screws.
-
Adjust the angle of the lamp and the solar panel (note that the solar panel needs to be installed in the sunosition).
-
Turn on the light switch and set the desired brightness and color temperature.
-
Insert the light into the ground.
Wall Mounting
-
Drill 3 holes in the wall and put the expansion bolts into the drilled holes.
-
Connect the spike A and the lamp with fixing screws, adjust the angle of the lamp and the solar panel (note that the solar panel needs to be installed in the sunny position).
-
Turn on the light switch and set the desired brightness and color temperature.
-
Fix the lamp on the wall with screws.
FAQ
The lamp doesn’t work.
- Make sure the lamp is switch on.
- The battery is out of power and charge the battery by solar panel in direct sunlight.
- The working time depends on the power which stores in the rechargeable battery.(The battery can only be fully charged in a sunny environment)
- The more power it charges during the day, the longer time it works during the night.
Charjng time.
Charging for over 8 hours is recommended. The charging time of solar products
is affected by weather condition and installation location.
Working hours
- When the battery is fully charged, Light control type: work for about 6 hours in high light mode, and about 12 hours in low light mode. Induction type: work about 250 times.
Packing List
- Spike set
- Set screw
- Solar Landscape Spotlights
- Expansion bolts
- Pack Instructions
Warning
- There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire.
- Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
- Under no circumstances should the luminaire be covered by a thermal pad or similar material.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>