DIE LINKE B04-22SP-L-C Solar Spot Lights Outdoor Garden User Manual
- June 14, 2024
- DIE LINKE
Table of Contents
DIE LINKE B04-22SP-L-C Solar Spot Lights Outdoor Garden
Thank you!
Thank you for purchasing Linke products. To ensure a better shopping
experience, please follow the instructions for use step by step.
If you have any questions about our products, please contact our customer
service, our after-sales team will contact you at the first time and resolve
any problems about the products.
Email: linkebsservice@163.com
servlce@llnke-ledllght.com
Attention
- The luminaire should be positioned at suggested installation height, please do not prolonged stare into the luminaire for more than 3 seconds within 2 meters.
- The light source is not replaceable, when it reaches the end of its life, the whole luminaire needs to be replaced.
- Because the solar panel is charged during the day, it will not turn on during the day. If you want to test the light during the day, please cover the solar panel or go to a dark room to test. (Do not shine the light on the solar panel in a dark environment, otherwise the light will flicker with high frequency)
- The working time of the lamp is related to the charging time. The charging effect on a sunny day will be better than that on a rainy day. In the case of continuous rainy days, the light may not be turned on because it is not charged. Please charge SH when the sunlight is sufficient, the lamp will turn on again.
- Please install the solar panel in a place with sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.
- When you receive the product for the first time, please fully charge it before using it (at least 8 hours or more) to ensure the duration of the light.
- Please clean the solar panel regularly to ensure the charging effect.
- Do not disassemble and modify the product by yourself to avoid product damage.
- Please stay away from fire sources. The waterproof rating of this product is IP66. Do not use it in water.
Parameters Table
Model| Solar Panel| Working Voltage| Color Temperature| lighting Angle I
Projection Distance| Brightness| Waterproof Rating| Extention Cord| Control
Method| Lamp Bocly Material| Ta
---|---|---|---|---|---|---|---|---|---|---
SL-SP02| 6V/2W| JV/DC| 2700K/4000K/6000K| 15′| SM| 30′| SM| High brightness|
LOW
brightness
| IP66| BM| Light Control| PC/ABS|
SL-SPOJ| 6V/3W| JV/DC| 2700K/4000K/6000K| 15′| SM| 30′| SM| High brightness|
Low brightness| IP66| 11M| Light Control| PC/ABS|
SL-SP04| 6V/4W| JV/DC| 2700K/4000K/6000K| 15″| SM| 30″| SM| High brightness|
Low brightness| IP66| 14M| Light Control| PC/ABS|
SL-SP06| 6V/6W| JV/DC| 2700K/4000K/6000K| 15″| SM| 30″| SM| High brightness|
Low brightness| IP66| 20M| Light Control| PC/ABS| -25 C ~ 40 C
SL-SP12| 6V/8W| 3V/DC| 2700K/4000K/6000K| 15′| SM| 30′| SM| High brightness|
Low brightness| IP66| 35M| Light Control| PC/ABS| -25 <: ~ 40 C
Product models/Size/Accessories
Solar panel installation
Note: The solar panel needs to be installed in a place where there is sufficient sunlight. Note that places like tree shade or glass will affect the charging effect.
Spotlight installation
How To Work
Wiring and mounting bracket
Control box and Light and solar panel extension cord connections: Connect the male and female ends of the extension cord and tighten the waterproof cap.
Control box function introduction
-
Input: Input lead
-
:Charging Indicator (The indicator lights up when charging)
12: Power Indicator {In low brightness mode, LED “2” remains on; in high brightness mode, LED “1” and “2” are both on) -
Power Switch: (On/default low brightness
– High brightness
– Off and cycle) -
Color Temperature Switch: (6000K- 4000K – 2700K and cycle)
-
Battery Indicator: (One light stays on means 30% battery; 2 lights stays on means 70% battery; 3 lights stays on means 100% battery)
-
Output: Output lead
FAQ
Q: The lamp doesn't work.
A: 1. Make sure the lamp is switch on. A: 2. The battery is out of power and charge the battery by solar panel in direct sunlight.
Q: Lighting time is short.
A: 1. The working time depends on the power which stores in the rechargeable battery.(The battery can only be fully charged in a sunny environment) A: 2. The more power it d’larges during the day.the longer time it works during the night.
Q· Charing time.
A: 1. Charging for over 8 hours is recommended.The solar products’ charging time is affected by weather condition and installation location.
Q: WorKing hours
A: 1. When the battery is fully charged, Light control type: work: for about 6 hours in high light mode, and about 12 hours in low light mode.
Warning
- There is a battery inside, high temperature and violent impact are prohibited. Keep away from fire
- Do not stare at the LED light-emitting surface closely for a long time to prevent the hurt to the eyes.
- Under no circumstances should the luminaire be covered by a thermal pad or similar material.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>