weyfinko W2-594×105 Body Camera User Manual

BODY CAMERA
User Manual

Please read this manual carefully before using the product, please keep it in a safe place for future reference For more information, Please visit http://www.weyfinko.com/support

Introduction

• Thank you for using the products produced by Weyfinko, please read this operation manual carefully before use. Please keep this operation manual in a safe place for future reference or reference. We do our best to ensure the accuracy of the information in this operation manual, but the information may be changed due to product upgrades and other reasons without notice.
• This manual is the user manual of the product. It briefly introduces the product’s features, performance indicators, appearance structure, usage methods and precautions, etc, for reference by the majority of users when using it, please read it carefully before use. If the equipment fails or you have questions about the contents of this manual, please contact our company in time, and welcome suggestions and criticisms;

Warning

•  Do not leave the device in dusty, damp, or splashed areas for a long time, and do not expose the device to open flames or heat.but in a cool, dry and insulated place.
• Please avoid placing the display screen and camera lens directly in sunlight.
• The battery (battery pack or battery pack) must not be exposed to excessive heat such as sunlight, fire or similar.
• Do not hit, disassemble, or squeeze the battery or near high temperature, high pressure, and humid environment.
•  Do not use metal to touch the metal contacts of the battery.
• It is forbidden to modify or add device files, folders, and folder directories
•  This camera is not a waterproof product. When using and charging, please pay attention to water in the product.
•  Please do not scratch the LCD and lens with sharp objects.

Attention

•  Please use a high-speed MicroSD card(TF, Trans-flash Card) above the U1(CLASS10 )card speed from a qualified official manufacturer.
•  Please use the charger approved by the manufacturer.

Precautions before using the product

• Before you start working with the product, please make a trial video to master the usage method.
• If you do not use this product for a long time, please charge it once every two months. When you use it again, please fully charge it in advance.
•  The video content recorded by the camera should be used for legalpurposes, and we does not provide any legal guarantee for its use place and purpose. The recorded film cannot be guaranteed to be legally valid evidence, and it is for reference only.
• The camera is an electronic product, and it may cause video interruption due to parts failure, memory card instability, power interruption during use, and standoff falling off. Therefore, it cannot replace insurance.
• When the color of the machine’s screen has a color difference after the machine is turned on and off, please restart it to restore the normal color.
•  Do not bring the camera close to objects with strong magnets, such as magnets and motors, and avoid placing the product close to objects that emit strong radio waves. Strong magnetic fields may cause product failure, or destroy images and sounds.Electromagnetic waves of specific frequencies may affect the image quality too.
• In order to maintain the quality of the product, do not place this product in humid,immersed, or ultra-high temperature places. Any damage to the machine caused by human negligence, self-disassembly, or improper use will lose the right to free maintenance during the warranty period.
•  We only provides limited warranty liability for the camera product itself, and does not provide any warranty or compensation liability for any parts or persons other than the product itself.
•  We are not responsible for repairing the data of the product’s memory card. If you need a warranty, you must save your recorded videos or other data before sending it for repair. Otherwise, it will not be responsible for the loss of the data. Product maintenance after the warranty period will be charged a maintenance fee. The function of the camera may be different from the instruction manual due to the difference of the software version, please refer to the official website software update announcement.
• When the machine breaks down, please do not disassemble and repair arbitrarily, the machine can only be repaired by authorized maintenance personnel.
•  Do not repair by yourself under any circumstances, so as not to cause man-made damage and affect the free warranty repair service.
• When charging, please place the product out of the reach of children. The power cord may cause accidental suffocation or electric shock to children.
•  Please keep packaging materials such as plastic bags out of the reach of children. Plastic bags may cause accidental suffocation of children.

Getting Started

1. Product parts
   **** 01.Reset Button Hole
   02.TYPE-C USB Cover
   03.Audio Recording Button
   04.Power Button
   05.Menu/OK Button
   06.Up/Key mark Button
   07.Down/Replay Button
   08.Return Button
   09.Mic
   10.Lens
   11.Video Button| 12.Infrared Night Vision Lamp
   13.White Lamp
   14.Blue Flashing Lights
   15.Photo Button
   16.Light Button
   17 Red flashing lights
   18.Light-sensitive
   19.Working status indicator
   20. speaker
   21.Charging indicator
   22.Memory Card
   ---|---

2. Indicators on the LCD screen
   01.Video Resolution
   02.Video Recording Icon
   03.Photo Icon
   04.Photo Resolution
   05-Current Video No.
   06.TF card status| 07.Date
   08.Time
   09.TF Card Remaining Space
   10.Audio recording Icon
   11.Battery icon
   12.TF card remaining recording space
   ---|---

3. Device charging
   Low battery indicator: When the battery voltage is too low, the battery power icon in the upper right corner of the display will turn red, and the screen will intermittently display the words “battery power is low, please charge in time” with a prompt sound, and it will automatically shut down after 5 minutes .
   Please charge it in time after the battery is low, so as not to affect your use.
   There are two ways to charge this camera:
   • Charge the device with the charger;
   • The device is connected to the computer to charge:
   
   As shown in the figure above, connect the device to the computer Or Standard power adapter with a Type-C data cable for charging. When charging, the working status indicator light shows green, the power indicator light shows blue.
   When charging is complete, The charging indicator blue light is off and only the green light is displayed.

4. Boot up
   In the shutdown state, short press the [Power button] to turn on the device, and enter the preview screen after turning on the power, the working status indicator is green.If you do not perform any operation, the default is to automatically enter the screen saver mode after 1 Minute of power on. After starting to record, the default is to automatically enter the screen saver mode after 1 Minute.

5. Power off
   In the power-on state, long press the [Power button] to shut down, all the indicators are off;and short press the [Power button] to enter the screen saver mode.

6. Standby
   In the power-on state, if you do not perform any operation, the default is to automatically enter the screen saver mode after 1 Minute of power-on, the screen is off, and the working status indicator is green. Tap any button to light up the display.

7. Menu Settings
   In the standby state, short press the [Menu] button to enter the “Menu” setting interface, and then press the [Up] button or [Down| button to select the item to be set after entering the menu interface, press the [OK] button to confirm the option, and use [Up] button or [Down] buttonkey to change the options, after the setting is completed, press the [OK]button again to confirm, the device will automatically save the setting changes. The detailed options of the system will not be described one by one. The screen display is as follows:
   

key
videos) will be automatically overwritten when the
memory is insufficient.
Video Length| 5min/10min/15min/2
Omin/30min| 5min| You can set the duration of each recording
Motion Detection| Off/on| Off| After turning it on, in the standby state, when there
is an object moving in front of the lens, it will
automatically start recording for 20 seconds. If
there is no object moving within 20 seconds, the
recording will stop.
Lcd Display| off/30sec/1min/2min| 1 minute| After it is turned on, the screen will automatically
turn off within the set time, and you can press any
button to turn it on again.
Auto Power Off| off/3min/5min/10min| 3min|
Key Tone| Off/on| on|
Exposure| -3,-2,-1,0,+1,+2,+3| 0
,| Image brightness value adjustment
Video Sound| Off/on| On| Synchronize sound recording when video recording
after opening
Device Volume| Low/medium/high| Medium|
Car Cam Mode| Off/on| Off| After being turned on, the vehicle power supply
supplies power to the device through the USB
interface. After the car is ignited, the device
automatically turns on and enters the video
recording mode. After the car is turned off, the
video is automatically saved and shut down.
Anti-Virus| Off/on| Off| Prevent computer virus infection
Password| OFF/000000| Off| When the setting is on, a password is required to
connect to the computer; the password is also
required to modify the local number/police
number/date setting/format/restore and other
permissions.
Change Password| 6-digits
(000000)| 0| The initial password is 000000, and the new
password can be changed after entering the old
Secret Mode| Off/on| Off| After turning it on, there will be no sound and
indicator light for all operations.
IR Filter| Manual/Auto| Manual| When set to manual, long press the MIC button to
turn on/off the infrared mode. When set to
automatic mode, the device detects the ambient
brightness through the light sensor to automatically
switch infrared.
Menu label name| Option value| Default| Remark
---|---|---|---
Device ID| 7-digit device number| 0|
Police ID| 6-digit user number| 0|
Language| | English|
Human Speaker| Off/on| |
Date/Time| 2022/6/20| | The device date and time can be set.
Format| Cancle/OK| |
Default Setting| Off/on| | Select “Yes”, the machine will automatically
restore all menu values to the default state.
Date stamp| Off/on| Off|
Version| Ver:Dsj W2 2022.06.
18| | Display the local software version number

•   Video resolution: –
  Press the [MENU] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are 080P/30, 720P/30, 480P/30,the default is 1080P 30FPS , Select the desired resolution and click [OK] to confirm.

• Photo Size:
  Press the[MENU] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are IM/2M/4M/26M/ 34M/40M/48M , the default is 34M, click after selection “OK” button to confirm.

• Photo burst:
  Press the [MENU] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are: oft/3p/5p/10p, the default is off, click [OK] after selecting ] Button to confirm.

• Post-record:
  Press the [MENU] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are: off/5sec/30sec/1min/5min, the default is off, After selecting, click [OK] to confirm.

• Compress Store:
  After opening, reduce the image quality, reduce the memory space, increase the memory storage time, press the [Menu] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are on or off There are two types, the default is off, after selecting,press [0K] to confirm.

• Loop record:
  When it is turned on, the old recording file will be automatically overwritten when the memory is insufficient. Click the [Menu] button to enter the state to be modified. The options are on and off. The default is off. After you have selected it, click the[OK] button to confirm.

• Video Length:
  Press the [Menu] button to enter the state to be modified, press the [up] button or the [down] button to select, you can set the time length of the segment video, the options are 5mins 10min+ 15mins 20min+ 30min, The default is 5 minutes, after selecting it,press [0K] to confirm.

• Motion detection:
  After activation, in the standby state, when there is an object moving in front of the lens, it will automatically start recording for 20 seconds. If there is no object moving within 20 seconds, the recording will stop after 20 seconds. If there is, it will continue to record. Turn off the recording again after no object moves within 20 seconds. Press the [Menu] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are on and off, the default is off, after selecting, press the [0K] button to confirm.

• Lcd Display:
  After it is turned on, the screen will be turned off automatically within the set time, and it can be turned on again by pressing any button. Press the [Menu] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are ofts 30 sec~ Imin~ 2min, the default is Iminute, click [0K] after selection Press to confirm.

• Auto Power Off:
  Press the [Menu] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are related, 3min, 5min,10min, off ; the default is off, click after you choose Press| OK| button to confirm.

• Key Tone:
  Press the [Menu] button to enter the state to be modified,press the [up] button or the [down] button to select, the options are on and off, the default is on, after selection, press [0K] to confirm

• Exposure compensation:
  Press the [Menu] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are +3, +2, +1,0, -1, -2, -3, The default is 0, after selecting it, click [0K] to confirm.

• Video sound:
  Press [Menu] button to enter the state to be modified, press[up] button or [down] button to select, the options are on and off, the default is on, after selection, press [0K] to confirm.

• Device Volume
  Press the [Menu] button to enter the state to be modified, press the [up] button or the [down] button to select, the options are low, medium, and high, and the default is medium. After selecting, press the [0K] button confirm.

• Car Cam Mode:
  Press [Menu] button to enter the state to be modified, press [up] button or [down] button to select, the options are on and off, the default is off, after selection, press [0K] to confirm.

• Anti—Virus:
  After itis turned on, it will not be infected with computer viruses during the process of connecting to the computer asa U disk. Press the [Menu] button to enter the state to be modified, and press the [up] button or the [down] button to select. The options are on and off. The default is off. After selection, press the [0K] button to confirm.

• Password protection:
  Click [Menu] to enter the password input state. The default password is 6 zeros. After entering the password, you can change the password on state. Click the [Up] button or [Down| button to change the specific content. The options are on/off, and the default is off. After the selection is complete, press the [0K] key to confirm.

• Modify password:
  Press [Menu] to enter the state of password input. The default password is 6 zeros. You can change the new password after entering the current password. Press the [up] button or the [down] button to change the specific content,and the input is complete Then press the [0K] button to confirm.

• Secret mode:
  When it is turned on, there is no sound prompt and no indicator light when recording. Press the [Menu] button to enter the state to be modified,press the [up] button or the [down] button to select, the options are on and off, and the default is off. After selecting, click [OK] to confirm.

• IR filter:
  When set to automatic mode, the device detects the ambient brightness through the light sensor to automatically switch infrared. When set to manual, long press the recording button to turn on/off the infrared mode. In the night vision mode, the image is black and the infrared light is on. Press the [Menu] button to enter the state to be modified, press the [up] key or the [down] key to select, and press the [OK]button to confirm.

• Device ID:
  Press [Menu] to modify the status, press the [up] button or [down] button to change the specific content, and press the [0K] button to confirm after the input is completed.

• Police ID:
  A Press[Menu] to modify the status, press [up] or [down] to change the specific content, and press [0K] to confirm after inputting.

• Language setting:
  Press [Menu] to enter the state to be modified, press [up] or [down] to change the options including simplified Chinese, traditional Chinese, and English, the default is simplified Chinese, click [OK] when finished confirm.

•   Human speaker(Voice prompt):
  Press [Menu] button to enter the state to be modified, press [up] button or [down] button to select, the options are on and off, the default is on, after selection, press [OK] to confirm.

• Date/Time:
  Press the [Menu] button to modify the status, press the [up] button or the [down] button to change the specific content, and after the input is completed, press the [0K] button to confirm.

• Default setting:
  Press the [Menu] button to enter the state to be modified, press the [up] button or [down] to select cancel and ok two options, after the selection is completed, press the [0K] button to confirm.

• Format:
  Please operate carefully. This operation will format the memory card, please back up the important data in the card before formatting.
  Press the [Menu] button to enter the state to be modified, press the [up] or [down] button to select two options of cancel and ok. After the selection is completed, press the [0K] button to confirm.

• Date Stamp:
  Press the [Menu] button to view the version number of the machine.

Video recording

• Video recording. One—click fast Video recording
  In the power-on state, shot press the [Video] button to start recording. or press and hold the [Video] button for 3 seconds in the power-off state to fast start video recording.
  During recording, a red dot in the upper left corner of the screen starts to flash slowly, and The flashing time in the lower right corner indicates the recording time and working status. The light is red and flashing. Press the [Video] button again to stop video recording, the work indicator turns green, the video file is automatically saved to the TF memory card, the screen automatically returns to the video preview screen, and the video is named after the date and time, with AVTas the suffix, and saved in memory Card. For viewing the video, please refer to the “Review/Playback Video” section.

• Video locking
  During the recording process, short press the [UP/Lock] button to lock the current video, and short press the [UP/Lock] button again to release the lock. The camera function will not be interrupted during this process. The locked video will not be deleted in the loop save state.

Separate voice recording. One—click fast recording

In the startup state, press the [MIC] button on the preview screen start voice recording, or press and hold the [MIC] button for 3 seconds in the shutdown state to quickly start recording with one key. The screen will display the identification mark during recording, and the work indicator will display a yellow indicator. Click the [MIC] button again to stop recording, the work indicator is green, the audio file is automatically saved to the TF memory card, and the screen automatically restores the preview image.

Photograph

In the power-on state, press the [Photo] button on the preview screen to take a picture and save it automatically. There will be a sound “click” during taking pictures. Each press the button will take a picture. The picture is named after the date and time, JPG suffix, and saved in memory Card. For viewing photos, please refer to the “View/Playback Video” section.

File deletion

Method 1: After the USB is connected to the computer, the camera’s memory card is read and written as a U disk, and files can be deleted on the computer. Method 2: In standby mode, short press the “Down” button to enter the “Video”, “PHOTO” and “Audio” pages. Enter the directory of the file you want to delete, select the “MENU/OK” button to display the file preview screen, long press the “MENU/OK” button again, press the prompt “Erase this: Cancle Or OK”, select “OK”, and then press “MENU/OK” key to delete the current file.

View/play back video

a. In the standby mode, short press [ok] to enter the review playback menu, and use the [Up] button or [Down] button to select the desired option, as shown in the figure below:

b. Click the [OK] button to enter the playback list, and use the [up] button or the [down] button to select the file to be played;
c. During playback, click the [OK] button to pause or play, and click the [Return] button to return to the previous menu;

Reset . Restart

When the device crashes or stops responding due to improper operation or other special reasons, you can press the [Reset] button with a needle, toothpicks or similar items (be careful not to use excessive force) to reset, and the device will automatically shut down after the reset button is pressed. The previous settings can be restored by rebooting.

Assemble and replace the memory card

As shown on the right, follow the direction 1indicated by the card symbol, and insertf \‘( – ”  the prepared high-speed memory card.B y 1

Note:
The device supports up to 512G memory card.
Important:
Must use a qualified high-speed card above C10.

Indicator light description

• In the power-on state, the work indicator under the preview screen is green and steady on;
• In the power-on state, the working indicator light is red and flashes slowly in video recording mode;
• In the power-on state, the working indicator is yellow in audio recording mode, flashing slowly;
• When charging, the charging indicator light is blue, and the charging end indicator light turn off.
• In the power-on state, every time a photo is taken, the work indicator flashes red once.
•  In the power-on state, long press the [Video recording] button to turn on infrared light.

Instructions for red—blue flashing lights and White lamp

• In the power-on state, long press the [Alarm] button to turn on the white light. long press again the [Alarm] button to turn off the white light.
• In the power-on state,shot press the [Alarm| button to turn on the flashing light, the machine emits alternate red and blue flashing lights with an alarm sound, which serves as an emergency alarm function. Press the [Alarm] button again to turn off the alarm sound . Shot press the [ Alarm] button again to turn off the flashing light.

Common faults and solutions

Failure
phenomenon| Failure analysis| Solution
---|---|---
The device
cannot be turned
on| Battery exhausted| Fully charge for 8 hours
The machine has been
automatically protected.| After pressing the [Reset] button to reset, restart the operation.
Use the USB communication cable to connect the device and the charger to turn on, activate the device, and restart
Machine working
time is short| Low battery or charging
time is too short| When you get the device for the first time or have not used it for a long time, please use the battery before charging. The charging time is no less than 8 hours.
Fully charged for more than 8 hours
Interrupted in the
process of
copying data to
the computer| Insufficient USB cable power supply| It is recommended that the data line be connected to the computer with a USB interface.
Poor contact of USB cable interface| During the data copy, please do not move the device at will; or replace with a new qualified USB cable
The computer does not recognize the device| Computer/data cable failure| Restart the computer and install the driver: or replace with a new qualified USB cable
Machine abnormal alarm| When the power of the machine is low, the battery indicator icon flashes on the display screen, accompanied by an alarm sound.| Charge the device

Device time calibration, password modification, device ID and police

number settings

• Scan the graphic code at the end of the page, contact after-sales service, and download – “BodyCam.exe” on the computer.
• Connect the law enforcement device to the computer through a USB data cable, the USB symbol appears on the screen of the law enforcement device, and the mobile hard disk is displayed on the computer side, and the connection is successful.
• Double-click body “BodyCam.exe” management interface.
•  on the computer to enter the
• Enter “000000″ in the login password and click “loggin Device”.
• After the connection is successful, as shown in the figure below, you can enter the detailed settings and modification.

Due to the continuous upgrading of product software, if some contents in this manual are different, the actual product shall prevail. If you do not understand, or need to upgrade the product software, please scan the code on the right to contact the official after-sales service for help. Or open http://www.weyfinko.com/support to download the upgrade file or upgrade tool!

https://work.weixin.qq.com/u/vcc5c23b2b874fe7c6?v=3.1.20.18331 &src=wx

Product main parameters

adjustable
Picture resolution| 8320×5760 48M; 7040×4992 34M; 6016×4096 26M; 2560×1728 4M; 1920×1200 2M; 1280×720 1M
Video format| AVI
Picture format| JPEG
power supply| 5V/1A
Battery| 2100mAh built-in
Memory Capacity| Supports up to 512GB (high-speed TF card)
duration| Continuous recording time 13 hours I standby time 21 hours(Screen Off/IR Off)
Waterproof and dustproof grade| generally
Anti-fall rating| Can withstand a free fall of 2 meters
Storage temperature| -40-+60°C
Working temperature| -10-+45°C
working system| Windows XP/VISTA/7, 8, 10 and Mac 10.5 or above
Camera size and weight| Size:3.03X2.25X1.1 (Inch) WT:0.224(1b)

Product package detail list

Body Camera X1
Shot clip X1
Charger X1
Long clip X1
Data cable X1
Manual X1

References

• ___Dept.
• 深圳市智海勇创科技贸易有限公司-网站未发布

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>