JARAMP J15 Smart Watch User Manual
- June 12, 2024
- JARAMP
Table of Contents
JARAMP J15 Smart Watch User Manual
Button function and charging
Knob button: ①Press and hold to turn on the power off state the page style
②Click to light up the screen when the screen is off
③When in the dial page, turn to switch the dial
④Double click on the main menu page to switch
⑤ When in the main menu page of Style 1, turn to zoom out or zoom in to enter
the function page
⑥ When in the main menu page other than Style 1, turn to move the mobile menu
⑦Long press in the power-on state to call out Power off, restart, SOS options
APP download and connection
https://www.divoiotcloud.com/ywatch
Please use Android4.4 and above or/ IOS8.0 and above mobile phones to scan
- The watch and the mobile phone must be connected to the APP and the mobile phone’s audio Bluetooth to realize all functions. The permissions during the APP installation process are all agreed.
- APP connection: Turn on the APP and the Bluetooth of the mobile phone, and the APP will remind you to enable the notification point to confirm. Click Add Device, search for the device name, and click Connect to connect the mobile device. Light up the watch screen, slide down from the edge of the screen on the dial page, a drop-down shortcut menu will appear, click the QR code icon, press and hold the QR code to slide left on the QR code page that appears, and a device will appear Pair the QR code, scan the code and connect to pair the current device.
- Mobile phone audio Bluetooth connection: You need to turn on Bluetooth on the watch side, enter the mobile phone Bluetooth, search for the Bluetooth device with the model name, and click Connect to pair.
- Simple solutions to common Bluetooth problems: Due to the lack of uniformity in the Bluetooth protocols of various mobile phone brands, sometimes the Bluetooth connection between the mobile phone and the watch may be unstable. You can turn off the Bluetooth of the mobile phone and reconnect it again, or restore the watch to factory settings , if the watch is in a dead state, you can press and hold the power button for ten seconds to restart the watch.
Features:
common problem:
- Can’t find the watch? Answer: If the Bluetooth broadcast of the watch is not found by the mobile phone, please make sure that the watch is powered and activated, and is not connected to other mobile phones. Put the watch close to the phone and search again. If it still doesn’t work, turn off the phone’s Bluetooth for 20 seconds and then turn it on again to search again.
- Should the Bluetooth connection be turned on all the time? If it is closed, will there still be data? Answer: Before the data is synchronized, the exercise and sleep data will remain on the watch host. When the mobile phone and the watch are successfully connected via Bluetooth, the watch will automatically upload the data to the mobile phone. However, the data stored on the watch is limited, and it can only store about one week of Bluetooth data. Data, when the space is full, it will automatically overwrite the earliest data to generate the latest data, so please synchronize the watch to the phone in time. Remarks: If the call and message reminder function is turned on, you need to keep the Bluetooth connected, and the alarm clock reminder supports offline.
- What should I do if the watch cannot be charged? Please confirm whether the direction of the charging interface is correct, and whether the charging interface is in good contact with the watch When the power of the watch is lower than 3.6V, there will be a battery pre-charging time for one end of the time Remarks: After plugging in the charger, it will enter the charging state immediately. If there is no display, it will enter the charging state after charging for 3-5 minutes.
Precautions for use:
- It is not advisable to wear it when bathing and swimming.
- Please connect the watch when synchronizing data.
- Please use the included charging cable to charge
- Do not expose the watch to places with high moisture, high or low temperature for a long time
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The devices has been evaluated to meet general RF exposure requirement the
device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>