BLUELEX 1080P Three One Portable Outdoor Body Camera User Manual

BLUELEX 1080P Three One Portable Outdoor Body Camera

Introduction

【Thank you for purchasing this product】Please learn about the user manual instruction carefully, to avoid damage caused by improper operation.

Special Features

• All-in-one portable lighting camera.
• 4 high-power white lights, high/middle/low lights 3 modes can switch, clear as full-color video at night.
• Working Mode: flashlight mode/Recordmode/Warning light mode/Web cam mode
• 1080P HD@30FPS, type-c interface
• Outdoor IP65 Waterproof
• Support 7*24 hours all-weather recording with the time stamp set
• Compatible with 16/32/64/128GB memory cards
• Built-in 1000 mah high-capacity lithium battery,battery life up to 5.5 hours
• *TF card can be freely read and taken out from the camera
• Wearable design, convenient for meeting records, interviews and evidence collection, car maintenance, mechanical maintenance, teaching materials shooting, outdoor activities, and other occasions.

Products Detail Photo

Product Description

[ Charge Time ]

• Please charge it first when using this unit for the first time(about 3 hours to fully charge)
• Video recording mode does not work without an SD card, please inserted an SD card before using it.
• The LED and LED flash alternately 20 times after power on, then power off when you power on the camera without an SD card.

[ About Loop-Recording User Instruction ]

This product system defaults to the loop recording function. The system will automatically overwrite the previous data when the memory capacity is less than 400MB (Once the overwritten data will not be restored, please use it with caution)

About Charging

[ Low Battery ]

If LED will flash and then turn off later when turning on the recording mode on low battery. Please charge the camera now.

[ Battery Charging ]

• Please use the standard 5V 1A charger/ Power bank to charge.
  / Charging –  LED keep flashing /
  / Full charging –  LED keep on bright /
  LED situation can be ignored when charging.

Video Recording Mode

[ Normal Record ]

• Insert memory card (support 16-128GB)

• short press button to power on the camera and start recording( LED keep flashing when recording)

• short press button again, record stop( LED turn to keep on bright)

• short press button again, and the camera will rebuild a new video file( LED keep flashing when recording)

• long-press button to turn off the camera( LED and LED will flash three times then turn off.
  Note:

• For long time recording, the video streaming is saved and divided into separate clips every 5 minutes and continues recording until stopped.

• The camera will be turn off auto when the camera no any operations in 1 min( LED keep on bright when camera in stand-by mode)

[ Recording when Charging ]

• Insert a memory card
• The camera will turn on into standby mode auto,when the camera is charging( LED keep bright on)
• Short press button, the camera start to record( LED keep flashing when recording)

A Blue led is flashing during recording , In case you need to activate NO LED WHILE RECORDING , Please connect the camera to computer , you will get a “time ” file , Open the “time” file to activate no led while recording .

Flashlight Mode

• Short press ” ” to start the lighting mode: 100% brightness | 50% brightness | 30% brightness can be selected.

Warning Light Mode

• Long press ” ” to turn on the warning light mode( LED and LED keep flashing alternately)
  Notice:
  Warning Light Mode LED will cover Video Record Mode LED ( LED ) , If you need open the working light while recording , you could turn on the record mode first then turn on the warning light .(Or turn of the warning light first to check the recording mode state )

Webcam Mode

• Remove the memory card inside the device.
• Use the standard data cable to connect the computer and the camera.
  Camera capture software recommends to use :
  Debut Video Capture Software
  (www.nchsoftware.co)

Video Replaying

• Use the standard data cable to connect the computer and the camera.
• The computer will recognize the new removable disk.
• Open the disk to watch the video on the memory card.
• Windows recommends VLC player or KM player, Mac recommends MK player or IINA player

Time Stamp Setting

The default timestamp is factory settings, which can be corrected by connecting the computer.

1. Connect camera to computer via provided USB cable.
2. New USB Disk appears on your PC
3. Camera will create a “txt” file (time.txt) in the new disk .
4. Open the“txt”file (time.txt) to revise the display time / date on your video.

The format is:

Note : 1.If u do not want to show the time stamp on videos/images, You could change Y to N.

MONTH / DAY / HOUR / MINUTE / SECOND except YEAR should be typed in a two- digit format, such as 01,02,03 instead of 1,2,3.
If you do not want the blue led flashing while recording,You could change Y to N.
A blue led flash 5 times then turns off,start video recording.
Save the file after revising.
Remove the camera from computer , then Turn on the camera to upgrade the time- stamp.

Camera Resetting

Please try to reset the camera when the camera happens wrong.

• Use the standard card pin or small tool to reset the camera and then rerun to use again.

Product Specifications

brightness optional
Warning Light Mode| Support
Webcam Mode| Support
Waterproof| IP65
Video Resolution| 1920×1080
Video Format| AV/
Viewing Angle| 100 °
Power Mode| Built-in battery  DC 5V 1A
Battery Life| 1000mAh lithium battery

3 hours flashlight
5.5 hours video recording
2 hours flashlight + video

No LED Mode

【No LED Mode correct by “time” file】 Learn more from “time stamp setting”

• After updating camera running situation:
  Turn on the camera, the camera start to record auto –  LED flash 5 times then shut down
  Short press the record button once –  LED keep in bright (Standby mode)
  Short press the record button again –  LED flash 5 times then shut down(restart to record)

• No LED Mode can be back to normal LED mode.

After-sales Service

Scan it to contact us by email

For quality issues, Please contact our after-sales team ksadbossbo@163.com We will provide QUALITY ASSURANCE, 30-day refund guarantee, and 1-year limited warranty.

References

• nchsoftware.co

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>