GREATHTEK SW204N 2 Port Display Port KVM Switch User Manual

GREATHTEK SW204N 2 Port Display Port KVM Switch User Manual

Safety and Notice

Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

Features

• Using only 1 set of keyboard, mouse and monitor to control 2 computer devices.
• Available to use keyboard and mouse without any delay after switch input sources.
• With 4 USB 3.0 hub port, it is possible to connect bar code scanner, USB hard drive or other USB devices to KVM.
• Support resolution up to 7680 x 4320@60Hz
• Support front panel buttons and External switch button to control KVM to switch inputs.
• Support Windows/Vista/XP and Mac OS, Linux and Unix, Plug and Play.

Specifications

• Support Resolution……………………………………………………………………… 7680″4320@60H
• Video bandwidth…………………………………………………………………………………. up to 48Gbps
• USB transfer rate………………………………………………………………………………….. up to 5Gbps
• Input cable distance …………………………… ≤3m@8K/60Hz, ≤5m@4K/60Hz
• Output cable distance ………………………….. ≤3m@8K/60Hz, ≤5m@4K/60Hz
• Power consumption …………………………….. 1W
• Input voltages DC/12V
• Operating Temperature range ……………………………………………………………….. (-5 to +45 C)
• Operating Humidity range……………………………………… 5 to 90%RH (No Condensation)
• Storage Temperature………………………………………………… .. -20’C – 60’C / -4’F – 140’F
• Dimension (L x W x H)…………………………………………………………………. 150X65X22 (mm)
• Net Weight………………………………………………………………………………………………………. 200g

Package Contents

1. 8K DP KVM Switcher : 1PC
2. 12V DC power adapter:  1PC
3. USB3.0_A type cable:  2PC
4. External controller kits:  1PC
5. User manual:  1PC

Panel Description

Figure 1 Front Panel

1. USB3.0: 4xUSB3.0 Host
2. PC1 PC2: indicator light for input
3. SW: Switch Button
4. Control: 3.5mm JACK Connect an external control kits to control device switching.

Figure 2 Rear Panel

1. DC12V: Power input 12V
2. PC2 IN: DP IN2 and USB IN2
3. PC1 IN: DP IN1 and USB IN1
4. DP OUT: Connect to monitor

Connection Diagram

How to Use:

1. Connect the DP output port of the computer 1 to the DP_IN1 input port on the back of the KVM switcher through an DP cable.
2. Connect the USB port of the computer 1 to the USB_IN1 port on the back of the KVM switcher through an USB cable.
3. Connect the DP output port of the computer 2 to the DP_IN2 input port on the back of the KVM switcher through an DP cable.
4. Connect the USB port of the computer 2 to the USB_IN2 port on the back of the KVM switcher through an USB cable.
5. Connect the DP_OUT behind the KVM switcher to the monitor via an Displayport cable.
6. Connect a mouse, printer, USB stick, etc. to the front USB port.
7. Switch between computer 1 and computer 2 through the buttons on the panel or external control kits.

Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected.

The common troubles shooting way shows below:

Non Power

Connected

| 1. Check that the power adapter head is truly and correctly plugged into the power outlet.

2. Check whether the USB cable is correctly connected to the host computer.

3. Whether the Displayport cable is correctly connected to the host computer.

4. Whether the host computer is powered on normally.

2

| ****

Display has no

image

| 1. Please check whether the connection between

the switcher and the monitor is correct.

2. Please check whether the host computer is

properly powered on.

3. Please check whether the computer host has the

correct output image.

3

| ****

USB not working

| 1. Please check whether the switcher is connected to the USB port of the computer correctly.

2. Please check whether the computer USB port

can work normally.

3. Please check whether the USB driver is correctly

installed on the computer.

Documents / Resources

| GREATHTEK SW204N 2 Port Display Port KVM Switch [pdf] User Manual
SW204N 2 Port Display Port KVM Switch, SW204N, 2 Port Display Port KVM Switch, Display Port KVM Switch, Port KVM Switch, KVM Switch, Switch
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>