GW INSTEK GPP-3610H Programmable DC Power Supply User Guide
- June 16, 2024
- GW INSTEK
Table of Contents
Programmable DC Power Supply
GPP-3610H/GPP-7250
Quick Start Guide
GW INSTEK PART NO. 82PP-72500M01
Introduction
GPP-3610H/GPP-7250 programmable high-precision DC power supply with adjustable outputvoltage/current and multi-function.
Front Panel
*The panel above is the example of GPP-3610H.
Rear Panel
Function
For more information, refer to the User Manual within the enclosed CD.
Display Modes
In order to offer diverse information display of each channel to meet
requirements from different users, the GPP series provide several selections
of different display modes.
Source Function
The required output voltage or output current can be obtained through the
Source function.
Load Mode
It can be set as Load Mode to realize electronic load function.
Sequence Function
Under Source mode of the GPP series, user can customize a certain V/I
sequential waveform output. Under Load mode, it is programmable for dynamic
load (below 1Hz).
Delay Function
It is necessary to output a series of pulse in real applications. This
function is available when voltage is constant. Output waveform can be edited
per user’s preference.
The amplitude range of the output waveform is the output voltage range of
power supply.
Monitor/Recorder Function
GPP series can realize certain function including the Monitor function, which
helps guarantee load status of client via halting operation based on certain
preset conditions, and the Recorder function, which effectively records output
status in real time.
Front and Rear output Function
GPP can be operated through panel menu or remote command to output on front
and back panels.
Remote Control
To meet the various needs from customers, the GPP series provide the
additional 4 types of remote control including USB, RS232 , GPIB(Option) and
LAN(Option).
Specification
The specifications only apply when the unit has warmed up for at least 30 minutes, within +20°C – +30°C.
Source output| Rating| 0 – 36.000V , 0 – 10.0000A (GPP-3610H)
0 – 72.000V , 0 – 5.0000A (G PP-7250)
---|---|---
Voltage
Current| Line regulation
Load regulation
Ripple & noise
Transient recovery time
Temperature coefficient
Line Regulation
Load Regulation
Ripple & noise| ≤ 0.01% + 3mV
≤ 0.01% + 5mV
≤1mVrms (5Hz-1MHz)
≤100µs (50% load change, minimum load 0.5A)
≤300ppm/°C
≤0.01% + 3mA
≤0.01% + 3mA
≤2mArms
Resolution| Voltage| programming 1 mV, readback 0.1 mV
programming 2mV, readback 0.1 mV| (GPP-3610H)
(G PP-7250)
Current| Programming 0.2mA, readback 0.2mA
Programming 0.1 mA, readback 0.1 mA| (GPP-3610H)
(G PP-7250)
Accuracy| Setting/Readback| Voltage: ± (0.03% of reading + 10mV)
Current: ± (0.3% of reading + 10mA)
Load| Display Voltage
Current Power| 1-36.50V (GPP-3610H)
1-72.50V (GPP-7250)
0-10.20A (GPP-36I OH)
0-5.200A (GPP-7250)
0-100.00W
CV Mode Setting Range
Setting/Read back accuracy Resolution| 1.500V – 36.50V (GPP-3610H)
1.500V – 72.50V (G PP-7250)
C±(0.1% + 30mV) 10mV
CC Mode Setting Range
Setting/Readback
accuracy Resolution| 0 – 10.200A (GPP-3610H)
0 – 5.200A (GPP-7250)
sr: ±(0.3% +10mA) lmA
CR Mode Setting Range
Setting/Read back
accuracy Resolution| lalkil
sr.- ±(3%+1Q) (voltage :-::0.1V, and current .3-0.1A)
10
OVP
| Power mode| OFF,ON(0.5V-38.0V) (GPP-3610H)
OFF,ON (0.5V-75.0V) (GPP-7250)
Load mode| OFF,ON (1.5V-38.0V) (GPP-361 OH)
OFF,ON (1.5V-75.0V) (GPP-7250)
Setting accuracy Resolution| ±100mV 100mV
OCP| Power/Load mode| OFF,ON(0.05A-10.50A) (GPP-3610H)
OFF,ON (0.05A-5.50A) (GPP-7250)
Setting accuracy Resolution| ±20mA
10mA
Power Input| AC 100V/120V/220V/230V±10%, 50/60Hz
Dimensions| 213 (w) x 145 (H) x 362 (D mm
**** ISO-9001 CERTIFIED MANUFACTURER