BOSCH WQG23108GR Tumble Dryer User Manual

Tumble dryer
WQG23108GR
User manual and installation instructions

Register your new device on MyBosch now and get free benefits: bosch- home.com/welcome
Futher information and explanations are available online:

https://digitalguide.bsh-group.com/?mat-no=9001800322&brand=
BOSCH&name=tumble%20dryer&vib=WQG23108GR&default=en

Safety

Observe the following safety instructions.
1.1 General information

• Read this instruction manual carefully.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• Do not connect the appliance if it has been damaged in transit.

1.2 Intended use
Only use this appliance:

• For drying and freshening up fabrics that are washed with water and suitable for dryers.
• in private households and in enclosed spaces in a domestic en- vironment.
• up to an altitude of max. 4000 m above sea level.

1.3 Restriction on user group
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Do not let children play with the appliance.
Cleaning and user maintenance must not be performed by children unless they are being supervised.
Keep children under the age of 3 years and pets away from the appliance.
1.4 Safe installation
WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.
▶ Connect and operate the appliance only in accordance with the specifications on the rating plate.
▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
▶ The protective conductor system of the domestic electrical installation must be properly installed. The installation must have a sufficiently large cross section.
▶ When using a residual current circuit breaker, only use a type with the mark.
▶ Never equip the appliance with an external switching device, e.g. a timer or remote control.
▶ Never connect the appliance to a circuit that is regularly switched on and off by the energy supplier.
▶ When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the installation regulations.
▶ When installing the appliance, check that the power cable is not trapped or damaged. If the insulation of the power cord is damaged, this is dangerous.
▶ Never let the power cord come into contact with hot appliance parts or heat sources.
▶ Never let the power cord come into contact with sharp points or edges.
▶ Never kink, crush or modify the power cord.
WARNING ‒ Risk of fire!
It is dangerous to use an extended power cord and non-approved adapters.
▶ Do not use extension cables or multiple socket strips.
▶ Only use adapters and power cords approved by the manufacturer.
▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted.
WARNING ‒ Risk of injury!
The high weight of the appliance may result in injury when lifted.
▶ Do not lift the appliance on your own.
If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall.
▶ Only stack the dryer on a washing machine using the connection kit from the dryer manufacturer
→ “Accessories”, Page 29. No other installation method is permitted.
▶ Do not install the appliance in a washer-dryer stack if the dryer manufacturer does not offer a suitable connection kit.
▶ Do not install appliances from different manufacturers and with varying depths and widths in a washer-dryer stack.
▶ Do not install a washer-dryer stack on a platform; the appliances may tip over.
WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.
▶ Keep packaging material away from children.
▶ Do not let children play with packaging material.
CAUTION ‒ Risk of injury!
The appliance may vibrate or move when in use.
▶ Place the appliance on a clean, even, solid surface.
▶ Align the appliance using the appliance feet and a spirit level.
If hoses and power cords have been laid incorrectly, this causes a tripping hazard.
▶ Lay hoses and power cords in such a way that there is no risk of tripping.
If the appliance is moved by holding onto protruding components, such as the appliance door, the parts may break off.
▶ Do not move the appliance by holding onto protruding parts.
CAUTION ‒ Risk of cutting!
Touching sharp edges on the appliance may lead to cuts.
▶ Do not touch the sharp edges on the appliance.
▶ Wear protective gloves when installing and transporting the ap- pliance.
1.5 Safe use
WARNING ‒ Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
▶ Call customer services. → Page 47
An ingress of moisture can cause an electric shock.
▶ Only use the appliance in enclosed spaces.
▶ Never expose the appliance to intense heat or humidity.
▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING ‒ Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.
▶ Do not install the appliance behind a door as this may obstruct the appliance door or prevent it from opening.
▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
WARNING ‒ Risk of suffocation!
Children may breathe in or swallow small parts, causing them to suffocate.
▶ Keep small parts away from children.
▶ Do not let children play with small parts.
WARNING ‒ Risk of explosion!
If there is coal dust or flour in the air around the appliance, this may cause an explosion.
▶ Keep the area around the appliance clean during operation.
WARNING ‒ Risk of poisoning!
Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
▶ Do not drink or reuse the condensation water from the appliance.
Detergents and care products may result in poisoning if consumed.
▶ If accidentally swallowed, seek medical advice.
▶ Keep detergents and care products out of the reach of children.
WARNING ‒ Risk of fire!
The refrigerant R290 in this appliance is environmentally friendly yet combustible and may ignite if it comes into contact with open flames or ignition sources.
▶ Keep naked flames and ignition sources away from the appliance.
WARNING ‒ Risk of explosion!
If there is any residual material left in the fluff filter, this may ignite during the drying process.
▶ Clean the fluff filter regularly.
Highly flammable objects such as lighters or matches may ignite during the drying process.
▶ Remove all highly flammable objects from any pockets in your laundry before the drying process.
Unwashed laundry that has come into contact with solvents, oil, wax, wax remover, paint, grease or stain remover may ignite when drying is in progress.
▶ Do not place laundry in this appliance to be dried if the laundry has not been washed first.
▶ Rinse the laundry thoroughly with warm water and detergent before drying it in the machine.
▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand.
WARNING ‒ Risk of fire!
If drying is interrupted early, the laundry is not cooled sufficiently and may ignite.
▶ Do not interrupt the drying programme early.
▶ If drying is interrupted early, remove the laundry immediately and spread it out.
CAUTION ‒ Risk of injury!
The covering plate may break if you stand on or climb onto the appliance.
▶ Do not stand on or climb onto the appliance.
The appliance may tip over if you sit on or lean against the open door.
▶ Do not sit on or lean against the appliance door.
▶ Do not place any objects on the appliance door.
Reaching into the drum while it is still turning may cause hand injuries.
▶ Wait for the drum to come to a complete stop before reaching inside.
1.6 Safe cleaning and maintenance
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING ‒ Risk of injury!
The use of non-original spare parts and non-original accessories is dangerous.
▶ Only use the manufacturer’s original spare parts and original accessories.
WARNING ‒ Risk of poisoning!
Poisonous fumes may be given off if you use cleaning agents that contain solvents.
▶ Do not use cleaning agents that contain solvents.

Preventing material damage

ATTENTION!
The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, detergent, care product or cleaning agent.
▶ Follow the dosage recommendations from the manufacturer.
Exceeding the maximum load capacity impairs the function of the appliance.
▶ Observe the maximum load capacity for each programme and do not exceed it. → “Programmes”, Page 26
The function of the appliance may be impaired if the appliance overheats.
▶ Keep the ventilation opening on the appliance clear during operation.
▶ Make sure that the area is adequately ventilated.
Light objects such as hair and fluff may be sucked in from the ventilation opening on the appliance during operation and impair the function of the appliance.
▶ Keep the area around the appliance clean during operation.
▶ Keep light objects away from the appliance.
If you operate the appliance without a fluff guard (e.g. fluff filter, fluff collector, filter mat, etc., depending on appliance specifications), or if the fluff guard is incomplete or defective, this may result in damage to the appliance.
▶ Do not operate the appliance without a fluff guard, or with a fluff guard that is incomplete or defective.
Foam and foam rubber may deform or melt during the drying process.
▶ Do not dry laundry that contains foam or foam rubber.
Unsuitable cleaning products may damage the surfaces of the appliance.
▶ Do not use harsh or abrasive detergents.
▶ Do not use cleaning products with a high alcohol content.
▶ Do not use hard scouring pads or cleaning sponges.
▶ Clean the appliance with nothing but water and a soft, damp cloth.
▶ Remove all detergent residue, spray residue or other residues immediately if they come into contact with the appliance.

Environmental protection and saving energy

3.1 Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
▶ Sort the individual components by type and dispose of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use less power.
Operate the appliance in a well-ventilated room and keep the ventilation opening on the appliance clear.
If air exchange is impeded, this extends the programme duration and increases energy consumption.
Spin the laundry in the washing machine before drying.
 Damper laundry extends the programme duration and increases energy consumption.
Observe the programme’s maximum load capacity.
→ “Programmes”, Page 26
If the maximum load is exceeded, this extends the programme duration and increases energy consumption.
After drying, clean the fluff filter
→ Page 31.
If the fluff filter is dirty, this reduces the air flow in the appliance, extends the programme duration and increases energy consumption.
Dry the filters in the filter system of the base unit → Page 33 thoroughly after cleaning.
If the filters are damp, this extends the programme duration and increases energy consumption.
3.3 Energy saving mode
If you do not use the appliance for an extended period, it automatically switches to energy-saving mode. All displays go out and Έναρξη/ Προσθήκη ρούχων flashes.
Energy-saving mode ends when you use the appliance again.

Installation and connection

4.1 Unpacking the appliance
ATTENTION!
Objects remaining in the drum that are not designed for operation with the appliance may cause material damage and damage to the appliance.
▶ Remove these objects, along with all supplied accessories, from the drum before starting the appliance.

1. Remove any packaging and protective covers completely from the appliance.
   → “Disposing of packaging”, Page 11

2. Check the appliance for visible damage.

3. Open the door.

4. Remove any accessories from the drum.

5. Close the door.

4.2 Scope of delivery
After unpacking all parts, check for any damage in transit and completeness of the delivery.
ATTENTION!
If the appliance is operated with incomplete or defective accessories, the appliance may not be able to operate properly, or this may result in material damage or damage to the appliance.
▶ Do not operate the appliance with incomplete or defective accessories.
▶ Replace the accessories in question before operating the appliance.
→ “Accessories”, Page 29

→ “Water drain hose”, Page 14

4.3 Requirements for the installation location
ATTENTION!
If the appliance is tilted at an angle greater than 40°, residual water may leak out of the appliance and cause material damage.
▶ Tilt the appliance carefully.
▶ Transport the appliance in an upright position.
If residual water in the appliance freezes, this may cause damage to the appliance.
▶ Do not install or operate this appliance anywhere that is liable to experience frost or outdoors.
If the appliance is operated immediately after transportation, the refrigerant contained in the appliance may result in damage to the appliance.
▶ Immediately after transporting the appliance, leave it to rest for two hours before putting it into operation.

Align the appliance → Page 16.
In a washer-dryer stack| Only use the original connection  set from the dryer manufacturer when setting up this appliance in a washer-dryer stack.
■ Connection kit with pull-out worktop → Page 29
■ Connection kit → Page 29
This appliance must only be stacked on a washing machine from the same manufacturer.
The depth and width of this appliance must correspond with the  dimensions of the washing machine. Do not place  the washer-dryer stack on a platform.
Against a wall| Do not trap the hoses and power cord between the wall and the appliance.

4.4 Water drain hose
Condensation forms during drying, which your appliance uses for automatic cleaning. Use the water drain hose to drain away excess condensation directly into the waste water system.
Notes

• Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 34.
• You can order this optional → “Accessories”, Page 29 from our customer service.

Connecting the water drain hose
If you do not want to regularly empty the appliance’s condensation container, connect the water outlet hose.
ATTENTION!
When operating the appliance without the water drain hose being connected properly, liquid may leak out of the connecting piece.
▶ Before operating the appliance, connect the water drain hose properly to the connecting piece.
Requirements

• The appliance and the accessory have been unpacked. → “Unpacking the appliance”, Page 12
• The appliance is installed at the installation location. → “Requirements for the installation location”, Page 13

1. Pull out the condensation hose from the connecting piece. The condensation hose is connectedto the connecting piece at the factory.
   Note: When removing the condensation hose, liquid may leak out of the connecting piece.

2. Push the condensation hose into the holder.

3. Push the water drain hose as far as it will go into the connecting piece.

4. Insert the water drain hose into the hose guide. Ensure that you do not bend the water drain hose.

5. Connect the appliance to the water outlet. → “Water outlet connection types”, Page 16

Tip: To collect condensation in the condensation container again (e.g. if you change where the appliance is located), carry out these steps in reverse order.
Water outlet connection types
ATTENTION!
In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance.
▶ Before operating the appliance, ensure that the wastewater drains away quickly and eliminate any blockages.

Drainage into a siphon.| Secure the connection point with a (12-22 mm) hose clamp. Secure the water drain hose with a hose guide at a height of at least 80 cm and no more than 100 cm.
Note: You can use the Y-distributor → Page 29 to connect the water drain hose of an additional appliance,
such as a washing machine, to the same siphon outlet.
---|---
Drainage into a wash basin.| Push the water drain hose fully through the and secure it using fixing material. Secure the elbow at a height of no
more than 100 cm.
Drainage into a gully.| Push the water drain hose fully through the and secure it using fixing material.  Secure the elbow to the gully.

4.5 Aligning the appliance
In order to reduce vibrations and noises, align the appliance correctly.
▶ To align the appliance, turn the appliance feet. Check that the appliance is level using a spirit level.

All appliance feet must stand firmly on the ground.
4.6 Connecting the appliance to the electricity supply

1. Insert the mains plug of the appliance’s power cable in a socket nearby.
   The connection details of the appliance can be found under Technical data → Page 49.

2. Check the mains plug is inserted properly.

Familiarising yourself with your appliance

5.1 Appliance
You can find an overview of the parts of your appliance here.

On certain models, specific details such as the colour and shape may differ from those pictured.

5.2 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

→ Page 30
3| Display → Page 19
4| Buttons → Page 22

Display

The display shows the current settings, options or relevant information.

Example: Display

hours and minutes.
1:25| Timed programme| The timed programme is set.
→ “Timed programmes”, Page 27
8.0¹| Recommended load| The maximum load capacity for the selected programme in kg.
+ 0:45¹| Programme end time| → “Buttons”, Page 24
| Childproof lock| ● lights up: The childproof lock is activated.
● flashes: The childproof lock is activated and the appliance has been operated.
→ “Deactivating the childproof lock”, Page 35
 (Έναρξη/ Προσθήκη
ρούχων)| Start/Pause| Start, cancel or pause
● Lights up: The programme is running and can be cancelled or paused.
● Flashes: The programme can be started or continued.
 (Για σιδέρωμα)| Dryness level: Iron Dry| The dryness level is activated.
→ “Buttons”, Page 23
 (Για φύλαξη)| Dryness level: Cupboard Dry| The dryness level is activated.
→ “Buttons”, Page 23
 (Φύλαξη Plus)| Dryness level: Cupboard Dry Plus| The dryness level is activated.
→ “Buttons”, Page 22
+1
+2
+3| Dryness level adjusted| The adjusted dryness level is activated.
→ “Dryness level”, Page 25
(Προστασία τσαλάκωμα)| Crease-reduction function| The crease-reduction function is activated.
→ “Buttons”, Page 23
 (Χαμηλή θερμοκρ)| Gentle drying| Gentle drying is activated for delicate fabrics.
→ “Buttons”, Page 23
 (Μισό φορτίο)”4kg”| Half load| Half load is activated.
→ “Buttons”, Page 24
 (Χωρίς ήχο)| Quiet drying| Quiet drying with no audible signals is activated.
→ “Buttons”, Page 24
| Condensation container| Empty the condensation container
→ Page 34.
Insert the condensation container
→ Page 35.
| Fluff filter| Clean the fluff filter → Page 31.
| Filter system on the base unit| Clean the filter system on the base unit
→ Page 33.
Hot| Cooling process| The laundry is cooled while the drum is rotating, in order to avoid damage to the laundry. The process can be cancelled by opening the door.
Note: Do not change the programme.
| Drying| Programme status
| Dryness level: Iron Dry| Programme status
| Dryness level: Cupboard Dry| Programme status
| Anti-crease| Programme status
 (Έναρξη/ Προσθήκη
ρούχων)””| Pause| Programme status
End| End of programme| Programme status

¹Example

Buttons

◾ Cancel
◾ Pause| Start, cancel or pause the programme.
3 δευτ.| ◾ Activate
◾ Deactivate| Activate or deactivate the childproof lock.
Disable the control panel to prevent unwanted or accidental operation.
If the childproof lock is activated and the appli- ance has been switched off, the childproof lock remains activated.
→ “Childproof lock”, Page 35
Φύλαξη Plus| ◾ Φύλαξη Plus
◾ +1
◾ +2
◾ +3| ◾ Selecting Φύλαξη
Plus activates the dry- ness level.
The dryness level defines how damp or dry the laundry is after the programme ends.
→ “Dryness level”, Page 25 
◾ The dryness level can be adjusted by select- ing +1 , +2 or +3 .
→ “Adjusting the dry- ness level”, Page 25
Για φύλαξη| ◾ Για φύλαξη
◾ +1″
◾ +2″
◾ +3| ◾ Selecting Για φύλαξη activates the dryness level.
The dryness level defines how damp or dry the laundry is after the programme ends.
→ “Dryness level”, Page 25 
◾  The dryness level can be adjusted by select- ing +1 , +2 or +3 .
→ “Adjusting the dry- ness level”, Page 25 

Για σιδέρωμα| ◾  Για σιδέρωμα
◾ +1
◾ +2
◾ +3| ◾ Selecting Για σιδέρωμα activates the dryness level. The dryness level defines how damp or dry the laundry is after the programme ends.
→ “Dryness level”, Page 25
◾ The dryness level can be adjusted by select- ing +1 , +2 or +3 .
→ “Adjusting the dry- ness level”, Page 25
Προστασία τσαλάκωμα| ◾ Activate
◾  Deactivate| Activate or deactivate the crease-reduction func- tion.
Once the programme has ended, the drum moves the laundry at regular intervals for 60 minutes to prevent creasing.
Χαμηλή θερμοκρ.| ◾ Activate
◾ Deactivate| Activate or deactivate gentle drying.
e temperature is re- duced for delicate fab- rics, e.g. polyacrylic or elastane.
The programme duration is extended.
Λήξη σε| ◾ Programme end time
◾ Programme duration| ◾ Set the programme end time.
The programme dura- tion is already in- cluded in the set num- ber of hours.
Once the programme has started, the pro- gramme duration is displayed.
◾ Set the programme duration for timed pro- grammes.
→ “Timed pro- grammes”, Page 27
Χωρίς ήχο| ◾ Activate
◾ Deactivate| Activate or deactivate operating signals and in- formation signals.
Μισό φορτίο| ◾ Activate
◾ Deactivate| Dry individual items of laundry or small loads of laundry.

Dryness level

Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends.

laundry is dry.
Για φύλαξη| Normal, single-layered laundry.| The laundry is dry.
Για σιδέρωμα| Normal, single-layered laundry.| The laundry is still slightly damp.
To prevent creasing after drying, iron the laundry or hang it up.

8.1 Changing the dryness level
For some automatic programmes, you can change the dryness level so that your laundry will be drier or more damp.
Set an automatic programme.

1. Set an automatic programme.
   → “Automatic programmes”, Page 26
   The display shows the specified dryness level.

2. Press Για φύλαξη , Φύλαξη Plus or Για σιδέρωμα .
   The display shows (Για φύλαξη), (Φύλαξη Plus) or (Για σιδέρωμα).

8.2 Adjusting the dryness level
If the laundry feels too damp after it has been dried to a particular dryness level, you can adjust the dryness level.

1. Set an automatic programme. → “Automatic programmes”, Page 26
   The display shows the specified dryness level.

2.  Press Για φύλαξη , Φύλαξη Plus or Για σιδέρωμα .

3. Press the set drying target again to adjust the dryness level.
   The display shows “+1” , “+2” or “+3” .

Programmes

You can dry your fabrics using either an automatic programme or a timed programme.
9.1 Automatic programmes
Automatic programmes are programmes in which humidity sensors measure the residual moisture in the laundry during the drying cycle. The programme only ends once the set dryness level is reached.
Each automatic programme has a dryness level → Page 25. The dryness level defines how dry or damp the laundry is after the programme
Tips

• Select the dryness level according to the type of fabric or the desired drying result. → “Dryness level”, Page 25
• The laundry’s care labels provide you with additional information about programme selection.

8.0
Βαμβακερά eco| Dry hard-wearing, heat-resistant fabrics made of cotton or linen.
Energy-saving programme.| 8.0
Συνθετικά| Dry items made of synthetic materials or blended fabrics.| 3.5
Ανάμεικτα| Dry items made of cotton and synthetics.| 3.0
Παπλώματα| Dry clothing, pillows, quilts or bedspreads filled with synthetic fibres.
Note: Dry large items of laundry, blankets or pillows individually.| 2.5
Ευπαθή| Dry delicate items made of satin, synthetics or blended fabrics.| 2.0
Πουπουλένια| Dry clothing, bedspreads or eiderdowns stuffed with down.
Notes
● Dry large items of laundry, such as blankets or sleeping bags, separately.
● Once the programme has ended, shake the items of laundry to distribute the stuffing and eliminate any pockets of moisture.
● If you dry the pillows and the pillows are not completely dry at the end of the programme, dry the pillows with a timed programme.
→ “Timed programmes”, Page 27| 1.5
Αθλητικά/ Μικροΐνες| Dry self-drying sportswear made of performance fibres, microfibres and synthetics.| 1.5
Πουκάμισα| Suitable for shirts and blouses made of cotton, linen, synthetics or blended fabrics.
Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time.
Once the laundry is dry, iron it or hang it up. The residual moisture is then distributed evenly.| 1.5
Γρήγορο 40′| Dry items made of synthetics and light cotton.| 1.0
Πετσέτες| Dry hard-wearing, heat-resistant towels and dressing gowns made of cotton or linen.| 6.0

9.2 Timed programmes
Timed programmes are programmes with a defined or adjustable programme duration. The programme ends once this time has elapsed, even if the laundry is still not dry, for example. Timed programmes are suitable for drying individual items of laundry or thin fabrics.
Tip: The laundry’s care labels provide you with additional information about programme selection.

wool.
Note: The laundry becomes fluffier but not dry.
Remove laundry once the programme has ended and allow it to dry.| 0.5
Κρύο πρόγρ. χρόνου| Dry all types of fabric except for wool and silk.
Also suitable for freshening up or airing clothing that has hardly been worn.| 3.0
Ζεστό πρόγρ. χρόνου| Dry all types of fabric except for wool and silk.
Suitable for pre-dried or slightly damp laundry and for drying off multi- layered, thick laundry.| 3.0

Accessories

Use original accessories. These have been made especially for your appliance.
Note: Some accessories are available in other colours. Contact → “Customer Service”, Page 47.

| Use| Order number
---|---|---
Connection kit| To save space, stack the appliance on a suitable washing machine of the same width and depth and that is from the same manufacturer.| WTZ20410
Connection kit with pullout worktop| To save space, stack the appliance on a suitable washing machine of the same width and depth and that is from the same manufacturer. The pull-out worktop makes it easier to load and unload the appliance.| WTZ11400
Y-distributor| Connect the water drain hose of an additional appliance to the same siphon outlet.| 15000490
Water drain hose| Drain away excess condensation directly into the waste water system, without having to regularly empty the condensation container.| WTZ1110
Filter mat| Spare part to protect against fluff for the base unit’s filter system.| 12007650
Platform| Install the appliance at a raised height so that it can be easily loaded and unloaded.| WTZPW20D

Laundry

11.1 Preparing the laundry
ATTENTION!
Objects remaining in the laundry may damage the laundry and the drum.
▶ Remove all items from any pockets in your laundry before using the appliance.
Note
The appliance and fabrics are protected when you prepare your laundry.

• Brush off sand and soil
• Sort the laundry according to colour and textiles and observe the care labels
• Close all zips, Velcro fasteners, hooks and eyes
• Remove curtain fittings and lead strips
• Load the laundry unfolded into the drum
• Spin the laundry before drying

Basic operation

12.1 Switching on the appliance
Requirement: The appliance has been correctly installed and connected.
→ “Installation and connection”, Page 12
▶ Turn the programme selector to a programme.
Note: The lighting for the drum goes out automatically.
12.2 Setting a programme

1. Turn the programme selector and set the required programme.
   → “Programmes”, Page 26

2. If required, adjust the programme settings.

12.3 Loading laundry
Note: To prevent creasing, note the maximum load for the programmes.
→ “Programmes”, Page 26
Requirements

• The laundry is prepared and sor- ted.
  → “Laundry”, Page 30

• The drum is empty.

1. Open the door.
2. Place the laundry in the drum.
3. Close the door.
   Ensure that there is no laundry trapped in the door.

12.4 Starting the programme
Requirement:  A programme is set.
→ “Setting a programme”, Page 30
▶ Press Έναρξη/ Προσθήκη ρούχων .
The display shows the programme duration or the programme end time.
After the programme has ended, the display shows: “End” .
Note: If “Hot” appears, the appliance cools the laundry.
When “Hot” goes out, the laundry has cooled down.
12.5 Adding laundry
After the programme starts, you can remove or add laundry at any time.

1. Press Έναρξη/ Προσθήκη ρούχων .
   The cooling process starts automatically after approximately 30 seconds and cools down the laundry while the drum is rotating. If you want to avoid or cancel the cooling process, open the door.
   → “Display”, Page 20

2. Open the door.

3. Add or remove laundry.

4. Close the door.

5. Press Έναρξη/ Προσθήκη ρούχων .

12.6 Cancelling the programme

1. Press Έναρξη/ Προσθήκη ρούχων .
2. Open the door.
3. Remove the laundry.
   → “Unloading the laundry”, Page 31

12.7 Unloading the laundry

1. Open the door.
2. Remove the laundry from the drum.

12.8 Switching off the appliance
▶ Turn the programme selector to Off .
12.9 Fluff filter
During drying, fluff from the laundry is collected in the fluff filter. The fluff filter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished or the display shows a notification while the appliance is in operation, clean the fluff filter.
Note: If you do not clean the appliance as described, the appliance’s functionality may be impaired.
Requirements

• The display shows the following after drying: “End”
• or the display shows the following during operation:

1. Open the door.
2. Remove the fluff from the door.
3. Remove the two-part fluff filter.
4. Remove the fluff from the recess. Ensure that no fluff falls into the air channel.
5. Disconnect the two-part fluff filter.
6. Open the two fluff filters.
7. Remove the fluff.
8. Clean the two fluff filters thoroughly under warm, running water and then dry them off.
9. Close the two fluff filters and put them together.
10. Insert the two-part fluff filter.
11. Close the door.

12.10 Filter system on the base unit
During drying, fluff from the laundry is collected in the base unit’s filter system. The filter system protects the appliance from fluff.
Cleaning the filter system on the base unit
If the display shows a notification while the appliance is in operation, clean the base unit’s filter system.
Notes

• You can clean the filter regularly system even without the notification being shown on the display. It is not necessary to clean after each drying cycle.
• If you do not clean the appliance as described, the appliance’s functionality may be impaired.

Requirement: The display shows the following during operation:

1. Clean the fluff filter → Page 31.

2. Open the base unit → Page 37.

3. Carefully remove the filter mat from the retainers. Ensure that you do not deform or damage the filter mat.

4. Use a soft brush to clean the heat exchanger cover. Make sure that you remove all dirt from the seal.

5. Clean the filter mat thoroughly under warm, running water and squeeze it out by hand. You can remove heavy soilingcarefully using a vacuum cleaner.
   Do not clean the filter mat using cleaning products.

6. Push the filter mat onto the retainers. Ensure that the cleaned filter mat is not deformed, damaged or inverted when you push it onto the retainers.
   Note:  You can order the filter mat
   → Page 29 as a spare part from customer service.

7. Close the base unit → Page 39.

12.11 Condensation container
Condensation forms during drying, which your appliance uses for automatic cleaning. By default, the condensation is collected in the appliance’s condensation container.
Note: Operate this appliance using the water drain hose provided. If you connect the water drain hose
→ Page 14, you do not have to regularly empty the condensation container → Page 34.
Emptying the condensation container
If the drying programme has finished or the display shows a notification while the appliance is in operation, empty the condensation container.
Requirements

• The display shows the following after drying: “End”
• or the display shows the following during operation:

1. Pull out the condensation container, keeping it level.
2. Empty the condensation container. Make sure that you insert the condensation container before operating the appliance.
   → “Inserting the condensation container”, Page 35

Inserting the condensation container
▶ Push the condensation container in as far as it will go.

Childproof lock

Secure your appliance against being operated unintentionally using the controls.
13.1 Activating the childproof lock
▶ Press and hold the two 3 δευτ. buttons for approx. 3 seconds.
The display shows .
 The control elements are locked.
The childproof lock remains active even after the appliance has been switched off and in the event of a power cut.
13.2 Deactivating the childproof lock
Requirement: To deactivate the childproof lock, the appliance must be switched on.
▶ Press and hold the two 3 δευτ. buttons for approx. 3 seconds.
goes out in the display.

Basic settings

You can configure the basic settings for your appliance to meet your needs.
14.1 Overview of the basic settings

1 (quiet)
2 (medium)
3 (loud)
4 (very loud)| Set the volume of the signal at the end of the programme.
Button signal| 3| 0 (off)
1 (quiet)
2 (medium)
3 (loud)
4 (very loud)| The volume of the audible signal emitted when the buttons are pressed.
Programme counter| 5| 42¹| Display the number of started programmes.

¹ Example

14.2 Changing the basic settings

1. Set the programme selector to position 1.

2. Press Για σιδέρωμα  and, at the same time, turn the programme selector to position 2.
   The display shows the current value.

3. Set the programme selector to the required position.
   → “Overview of the basic settings”, Page 36

4. To change the value, press Λήξη σε .

5. To save the changes, switch off the appliance.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
15.1 Tips on cleaning and care

Wipe down the housing and the controls with nothing but water and a damp cloth.| This ensures the parts of the appliance will remain clean and hygienic.
---|---
Remove all detergent residue, spray residue or other residues immediately.| Fresh deposits are easier to remove without leaving any residue.
Leave the appliance door open after use.| This allows the residual water to dry, reducing odours in the appliance.

15.2 Base unit
The base unit is the accessible area at the bottom of the appliance in which you will find the heat exchanger.
Opening the base unit
Requirements

• The appliance has cooled down for 30 minutes.
• The appliance door is closed.

1. Open the maintenance flap. If you place a cloth beneath the maintenance flap, you can collect the remaining water from the base unit.
2. Open the lever for the heat exchanger cover.
3. Pull out the heat exchanger cover by the handle.

Cleaning the base unit
You can remove any visible dirt in the base unit.
CAUTION
Risk of cutting!
Touching sharp edges on the heat exchanger may lead to cuts.
▶ Do not touch the fins on the heat exchanger.

1. Open the base unit → Page 37.
2. Use a soft brush to clean the heat exchanger cover. Make sure that you remove all dirt from the seal.
3. Carefully clean the fins on the heat exchanger with a vacuum cleaner and brush attachment. Ensure that you vacuum the fins from top to bottom so that they do not become deformed or damaged.
4. Clean the opening with a soft, damp cloth.
5. Close the base unit → Page 39.

Closing the base unit
Requirement:  The base unit is open.
→ “Opening the base unit”, Page 37

1. Insert the heat exchanger cover by the handle.
2. Close the lever for the heat exchanger.
3. Close the maintenance flap.

15.3 Moisture sensor
The moisture sensor in this appliance measures how damp the laundry is during the drying cycle. The appliance changes the duration of the automatic programme depending on the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale, detergents and care products can build up on the moisture sensor. Clean the moisture sensor regularly.
ATTENTION!
Hard or rough objects may damage the moisture sensor.
▶ Do not use hard or rough objects, abrasive cleaning products or steel wool for cleaning.
Note: If you do not clean the appliance as described, the appliance’s functionality may be impaired.

1. Open the door.
2. Clean the moisture sensor with a sponge.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.

1. Not a fault.
2. Do not change the programme during the cooling process.
Note: The cooling process takes up to 10 minutes.
You can continue to operate the appliance.
Humming noise.| Compressor active.
▶ Not a fault – normal operating noise.
The display goes out and Έναρξη/ Προσθήκη ρούχων
flashes.| Energy-saving mode is active
▶ Press any button.
The symbol lights up again.
| Fluff filter is soiled.
▶ → “Cleaning the fluff filter”, Page 31
| The base unit’s filter is soiled.
▶ → “Cleaning the filter system on the base unit”, Page 33
The appliance is not working.| The mains plug of the power cord is not plugged in.
▶ Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶ Check the circuit breaker in the fuse box.
There has been a power cut.
▶ Check whether the lighting in your kitchen or other appliances are working.
Appliance paused, but the drum is rotating.| Cooling process active.
▶ Not a fault – no action required.
Creasing.| The load is too large.
▶ Observe the maximum load capacity of the → “Programmes”, Page 26.
The laundry lies in the drum for too long after drying.
1. Remove the laundry from the drum as soon as the drying programme has finished.
2. Spread the items of laundry for cooling.
Unsuitable programme for the type of fabric.
▶ Set the suitable programme for the type of fabric.
→ “Programmes”, Page 26
Easy-Care fabrics are dried for too long.
▶ → “Changing the dryness level”, Page 25.
▶ → “Adjusting the dryness level”, Page 25.
Anti-Crease not activated.
▶ Activate the Anti-Crease function.
→ “Buttons”, Page 23
 and programme terminated.| Condensation tank filled.
1. → “Emptying the condensation container”, Page 34.
2. → “Inserting the condensation container”, Page 35.
3. → “Starting the programme”, Page 30.
Water drain hose is caught or jammed.
1. Ensure that the water drain hose is not kinked or trapped.
2. Route the water drain hose without kinks.
Water drain hose is not connected correctly.
▶ Ensure that the water drain hose is connected correctly.
→ “Connecting the water drain hose”, Page 14
Water drain hose is blocked.
▶ Rinse the water drain hose with tap water.
Foreign object is located in the base unit
1. → “Opening the base unit”, Page 37.
2. Remove the foreign objects that are present.
3. → “Closing the base unit”, Page 39.
Condensation in the condensation tank even though the water drain hose is connected.| The appliance uses condensation for the automatic self-cleaning.
▶ Not a fault – no action required.
Water drain hose is not connected correctly.
▶ Ensure that the water drain hose is connected correctly.
→ “Connecting the water drain hose”, Page 14
The programme does not start.| Childproof lock is activated.
▶ → “Deactivating the childproof lock”, Page 35
Έναρξη/ Προσθήκη ρούχων  has not been pressed.
▶ Press Έναρξη/ Προσθήκη ρούχων .
No programme set.
1. → “Setting a programme”, Page 30.
2. → “Starting the programme”, Page 30.
The length of the programme changes during the drying cycle.| The programme operation is optimised electronically.
This may change the programme duration.
▶ Not a fault – no action required.
Pumping noise.| Condensation pump active.
▶ Not a fault – normal operating noise.
Buzzing noise.| Compressor ventilation active.
▶ Not a fault – normal operating noise.
The drying time is too long.| The base unit’s filter is soiled.
▶ → “Cleaning the filter system on the base unit”, Page 33
Fluff filter is soiled.
▶ → “Cleaning the fluff filter”, Page 31
The ambient temperature is greater than 30 °C.
▶ Ensure that the ambient temperature is below 30 °C.
The ambient temperature is lower than 15 °C.
▶ Ensure that the ambient temperature is above 15 °C.
Insufficient air circulation at the appliance’s installation location.
▶ Ventilate the appliance’s installation location.
The appliance’s ventilation opening is blocked.
▶ Ensure that the ventilation opening of the appliance is kept clear.
Heat exchanger is soiled.
The drying time is too long.| 1. Opening the base unit.
→ “Opening the base unit”, Page 37.
2. Cleaning the heat exchanger.
→ “Cleaning the base unit”, Page 38.
3. Closing the base unit.
→ “Closing the base unit”, Page 39.
Water is leaking from the appliance.| Appliance is not correctly aligned.
▶ → “Aligning the appliance”, Page 16
The seal for the heat exchanger cover is dirty.
▶ Clean the seal for the heat exchanger cover.
→ “Cleaning the filter system on the base unit”, Page 33
Water drain hose is not connected correctly.
▶ Ensure that the water drain hose is connected correctly.
→ “Connecting the water drain hose”, Page 14
The lever for the heat exchanger cover is not closed correctly.
▶ Ensure that the lever for the heat exchanger cover is closed correctly.
→ “Closing the base unit”, Page 39
The laundry is too damp.| Unsuitable programme for the type of fabric.
▶ Set a timed programme for the subsequent drying.
→ “Programmes”, Page 26
There has been a power cut.
▶ Check whether the lighting in your kitchen or other appliances are working.
The load is too large.
▶ Observe the maximum load capacity of the → “Programmes”, Page 26.
After the end of the programme, warm laundry feels damper than it actually is.
1. Remove the laundry from the drum as soon as the drying programme has finished.
2. Spread the items of laundry for cooling.
Unsuitable dryness level set.
▶ → “Changing the dryness level”, Page 25.
 Drying target not adjusted.
▶ → “Adjusting the dryness level”, Page 25.
Load too small.
The laundry is too damp.| ▶ Set a timed programme for the subsequent drying.
→ “Programmes”, Page 26
Moisture sensor dirty.
▶ → “Cleaning the moisture sensor”, Page 39.
The drying process is interrupted and the condensation tank has been filled.
1. → “Emptying the condensation container”, Page 34.
2. → “Inserting the condensation container”, Page 35.
3. → “Starting the programme”, Page 30.

Transportation, storage and disposal

17.1 Preparing the appliance for transportation
ATTENTION!
If the appliance is operated immediately after transportation, the refrigerant contained in the appliance may result in damage to the appliance.
▶ Immediately after transporting the appliance, leave it to rest for two hours before putting it into operation.
Tip: The appliance may contain residual water, which may drip out of it when transported. The appliance should be transported upright.
Requirements

• The condensation container is emptied. Emptying the condensation container → Page 34
• The appliance has been switched on. → “Switching on the appliance”, Page 30

1. Set any programme → Page 30.

2. Start the programme → Page 30 and wait 5 minutes.
   The condensation is drained.

3. Switch off the appliance.
   → “Switching off the appliance”, Page 31

4. Remove the water drain hose from the connection point.
   → “Water outlet connection types”, Page 16

5. Secure the water drain hose on the appliance against unintentional loosening.
   Ensure that you do not bend the water drain hose.

6. Empty the condensation container → Page 34.

7. Insert the condensation container → Page 35.

8. Disconnect the appliance’s mains  plug from the power supply.
   The appliance is now ready to be transported.

17.2 Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING
Risk of harm to health!
Children can lock themselves in the appliance, thereby putting their lives at risk.
▶ Do not install the appliance behind a door as this may obstruct the appliance door or prevent it from opening.
▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
WARNING
Risk of fire!
The refrigerant R290 used in this appliance is environmentally friendly. It is however flammable and may ignite if appliances are not disposed of properly.
▶ Dispose of the appliance properly.
▶ Do not damage the tubing of the refrigerant circuit.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner.

Information about current disposal methods are available from your specialist dealer or local authority.
**** This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge.
Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website.
If you contact Customer Service, you will require the product number (ENr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
18.1 Product number (E-Nr.) and production number (FD)
You can find the product number (ENr.) and the production number (FD) on the appliance’s rating plate. Depending on the model, the rating plate is located:

• On the inside of the door.
• On the inside of the maintenance flap.
• On the rear of the appliance.

Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Consumption values

The Βαμβακερά eco programme (denoted by the arrow symbol) is suitable for drying cotton laundry with a normal dampness level, and is the most efficient programme for drying damp cotton laundry in terms of combined energy consumption. The consumption values for this programme that are declared on the energy label refer to a moisture content of the laundry of 60%. The values specified for other programmes are indicative only and were determined in accordance with the applicable standard EN61121.
The actual values may deviate from the indicated values depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric, set degree of dryness, amount of laundry being loaded, environmental conditions and the activation of additional functions. The expected programme duration/”Ready in” time that is shown on the appliance display when selecting the programme is based on the spin speed in the washing machine of 1000 rpm when the appliance is delivered.

Programme| Final mois- ture level (%)| Load (kg)| Spin speed (rpm)| Initial mois- ture level (%)| Pro- gramm e dura- tion (h:min)| Energy con- sump- tion (kWh/ cycle)
---|---|---|---|---|---|---
Βαμβακερά + Για φύλαξη| -1.5| 8.0| 1400| 50| 3:20| 1.69
Βαμβακερά + Για φύλαξη| -1.5| 4.0| 1400| 50| 2:15| 1.12
Βαμβακερά + Για φύλαξη| -1.5| 8.0| 1000| 60| 3:45| 1.95
Βαμβακερά + Για φύλαξη| -1.5| 4.0| 1000| 60| 2:28| 1.26
Βαμβακερά + Για φύλαξη| -1.5| 8.0| 800| 70| 4:11| 2.21
Βαμβακερά + Για φύλαξη| -1.5| 4.0| 800| 70| 2:41| 1.39
Βαμβακερά eco| 0.0| 8.0| 1400| 50| 3:05| 1.61
Βαμβακερά eco| 0.0| 4.0| 1400| 50| 2:01| 1.01
Βαμβακερά eco| 0.0| 8.0| 1000| 60| 3:31| 1.86
Βαμβακερά eco| 0.0| 4.0| 1000| 60| 2:15| 1.15
Βαμβακερά eco| 0.0| 8.0| 800| 70| 3:58| 2.11
Βαμβακερά eco| 0.0| 4.0| 800| 70| 2:30| 1.29
Βαμβακερά + Για σιδέρωμα| 12.0| 8.0| 1400| 50| 2:18| 1.15
Βαμβακερά + Για σιδέρωμα| 12.0| 4.0| 1400| 50| 1:25| 0.67
Βαμβακερά + Για σιδέρωμα| 12.0| 8.0| 1000| 60| 2:45| 1.42
Βαμβακερά + Για σιδέρωμα| 12.0| 4.0| 1000| 60| 1:38| 0.81
Βαμβακερά + Για σιδέρωμα| 12.0| 8.0| 800| 70| 3:12| 1.69
Βαμβακερά + Για σιδέρωμα| 12.0| 4.0| 800| 70| 1:52| 0.95
Συνθετικά + Για φύλαξη| 2.0| 3.5| 800| 40| 1:08| 0.55
Συνθετικά + Για φύλαξη| 2.0| 3.5| 600| 50| 1:23| 0.68

Technical data

◾ Left-on mode: 0.50 W
Ambient temper- ature| ◾ Minimum: 5 °C
◾ Maximum: 35 °C
Length of the power cord| 145 cm

This product contains light sources from energy efficiency class F. These light sources are available as a spare part and must only be replaced by trained specialist staff.
You can find more information about your model online at https://eprel.ec.europa.eu/¹. This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the characters before the slash in the product number (E-Nr.) on the rating plate. Alternatively, you can also find the model identifier in the first line of the EU energy label.
¹ Only applies to countries in the European Economic Area

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:

• Expert tips & tricks for your appliance
• Warranty extension options
• Discounts for accessories & spare-parts
• Digital manual and all appliance data at hand
• Easy access to Bosch Home Appliances Service

Free and easy registration – also on mobile phones: www.bosch- home.com/welcome
Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts.
Find out everything about the many ways Bosch can support you: www.bosch- home.com/service
Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
www.bosch-home.com
Valid within Great Britain:
Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom
A Bosch Company

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>