GO SOLID Charger Power Adapter for Consumer Electronics Instruction Manual
- June 16, 2024
- GO SOLID
Table of Contents
GO SOLID Charger Power Adapter for Consumer Electronics
Product specifications
| Model | Charger |
|---|---|
| Input power | 100 – 240V |
| Output Voltages | Dependent on the charger |
| Output Amperes | Dependent on the charger |
| Cable length | 1 M |
| Size | 141x60x31MM |
| Weight | 200 G |
| Safety features | ● Current limit |
● Pressure limit
● Short circuit
● Overheat protection
User instructions
Please read all instructions carefully before installing and use, and retain these instructions for future reference.
- Connect the charging device in a socket outlet that is close by and is easy to disconnect from the source.
- Avoid charging near sources of heat or humidity.
- To disconnect, pull the device from the AC socket. Do not pull the cord to remove it from the AC socket.
- Keep the device and charger away from wet of damp locations.
- Unplug the device and charger from the AC socket when unused.
- Do not use this device if visible defects are observed in the device or its cord.
- Led indication
- Light on: in the charging process
- Light off: disconnected
Caution
Do not attempt to service or disassemble. If you experience problems with the
adapter, discontinue use, unplug the adapter from the AC socket, and contact
GO SOLID! For assistance. Any changes or modifications not expressly approved
by the partly responsible for compliance could void the user’s authority to
operate this equipment.
CE Declaration of Conformity
We, GO SOLID! Declare under our sole responsibility that the product to which
this declaration relates conforms with EMC Directive 2014/30/EU, Low Voltage
Directive 2014/35/EU Energy Directive 2005/32/EC & 2009/125/EC RoHS Directive
2011/65/EU.
Disposal information for the user
Under and by Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE). The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste. Therefore, any product that has reached the end of its useful life must be given to waste disposal centres specializing in separate collection of waste electrical and electronic equipment or given back to he dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country. The adequate separate collection for the subsequent start- of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.
Warranty
GO SOLID! Warrants the hardware in this GO SOLID! Product against defects in materials and workmanship under normal use for the Hardware Warranty Period. This period begins on the date of purchase by the original end-user purchaser and lasts for 12 months. If you make an eligible claim under this manufacturer’s warranty, GO SOLID! Will honour this warranty by doing one of the following (at its option):
- Repairing the product
- Replacing the product with an equivalent or new product
- Refunding the actual purchase price of the product less any rebates and discounts
Note: the manufacturer warranty does not apply if:
- The product damage was caused by the user himself.
- The product has not been installed, operated, repaired, or maintained following instructions supplied by GO SOLID!
- The product has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident.
- The product was opened of altered in any way.
GO SOLID! Is a registered trademark of Happy on Web B.V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>