Einhell 3437019 Ice Auger Bit Instructions
- June 16, 2024
- Einhell
Table of Contents
Einhell 3437019 Ice Auger Bit
Product Information
Specifications
- Product Name: Einhell Ice Auger
- Model Number: Art.-Nr. 3437019
- Item Number: I.-Nr. 21012
- Expiration Date: EH 05/2023 (01)
Product Usage Instructions
Safety Precautions
It is important to follow these safety precautions to ensure safe usage of
the Einhell ice auger:
- CAUTION! The ice auger blades are VERY SHARP! Always handle with care and keep safety in mind.
- Avoid wrist injury by using caution and not forcing the ice auger.
Storage & Maintenance
Proper storage and maintenance of the Einhell ice auger will help prolong
its lifespan and ensure optimal performance:
- After each use, clean the ice auger thoroughly to remove any ice or debris.
- Dry the ice auger completely before storing it to prevent rust or corrosion.
- Store the ice auger in a cool, dry place away from direct sunlight.
- Regularly inspect the blades and other parts for any signs of damage or wear. Replace any damaged parts before using the ice auger.
Frequently Asked Questions (FAQ)
Q: How should I handle the sharp blades of the ice auger?
A: Always handle the ice auger with caution, keeping safety in mind. Avoid
touching the sharp blades directly and use protective gloves when necessary.
Q: Can I use the ice auger on any type of ice?
A: The Einhell ice auger is designed for use on various types of ice. However,
exercise caution and ensure that the ice is thick enough to support the
auger’s weight.
Q: How often should I clean and maintain the ice auger?
A: It is recommended to clean the ice auger after each use and perform regular
maintenance checks to ensure optimal performance.
Additionally, store the ice auger in a dry place to prevent damage or
corrosion.
Q: Can I sharpen the blades of the ice auger?
A: Yes, you can sharpen the blades of the ice auger if they become dull.
Follow the instructions provided in the user manual or seek professional
assistance to ensure proper sharpening.
Important Safety Information
CAUTION! The Einhell ice auger blades are VERY SHARP! Be sure to keep safety in the front of your mind whenever using it.
-
DO NOT use the ice auger for anything else except for which it is intended – for drilling ice. It is not designed to drill into soil or lumber.
-
When drilling, keep a firm hold on the Auger handles. Also maintain proper footing and balance at all times.
-
Train inexperienced operators before allowing them to use the ice drill.
DO NOT wear loose clothing or jewelry. They can be caught in the moving auger. -
DO wear ice cleats in order to maintain firm footing.
-
During the operation of cutting the ice, the ice auger could possibly bind. Use caution to avoid wrist injury and to not force the ice auger.
-
After cutting the ice fishing holes, the ice auger should ALWAYS be set in a safe place to prevent personal injury or damage to the auger shaft or blades.
-
Inspect auger periodically, and if damaged, have it repaired or replaced by an authorized service facility. Keep the blades sharp and clean for best performance and reduce the risk of injury.
-
Make sure the auger switch is in a locked position when changing blades.
-
After changing the blades make sure to ALWAYS put the safety cover on the ice auger.
-
When installing or removing the blades, make sure someone helps hold the ice auger to avoid injury.
-
DO NOT try to sharpen the blades yourself. Get new blades at your Einhell retailer or check www.Einhell.com.
Storage & Maintenance
- Make sure to store the ice auger in a safe location, and out of reach of children and animals. MAKE SURE THE SAFETY CO-VER IS IN PLACE!
- Before storage, spray a lubricating oil on the blades to prevent rusting during the off season.
- Make sure to store the used PXC Batteries above freezing temperature. The ideal storage temperature is between 5°C and 30°C (41°F and 86°F).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>