DJ Disco Stage Laser Party Light User Manual
- June 16, 2024
- DJ Disco
Table of Contents
DJ Disco Stage Laser Party Light
Product Information
Specifications
- Product Name: Stage Laser Party Light
- Included Items:
- 1 Laser Party Light
- 1 Power Cable
- 1 Handle
- 2 Screw
- 1 User Manual
- 1 Remote Controller
- Laser Safety Warnings: This product contains high-power laser devices. Avoid direct eye contact with laser light. Never shine the laser into audience areas or at aircraft.
- Cleaning Instructions: Clean the internal and external lenses periodically with normal glass cleaner and a soft cloth. Ensure all parts are completely dry before plugging the unit back in.
- Warranty: If you still have a problem after following the provided solutions, contact your dealer or the company for service.
Fixture Appearance & Size
- 4 RGB LED Strobe Light
- Twinkling Stars Green Light
- Twinkling Stars Red Light
- Power Cable Input
- Display DMX IN DMX OUT
- Beam Patterns Red Light
- Beam Patterns Green Light
- Pulsation Patterns Light
- Switch Menu Button MIC
- Dimensions: 7.54in x 3.9in x 10.2in
- Laser Expected Lifespan: Not specified
- Mounting Diagram: Not provided
TTENTION : Read this manual before using. Do not attempt to open the housing or repair this device by yourself without contact us!
Before for Begin
Unpacking Instructions
Thank you for purchasing this product. Please read user guide for safety and
operations information before using the product. Keep this manual for future
reference. This product can create perfect light programs and effects since it
has passed a series of strictly tests before delivery. Please check the
attachments listed on the page after opening the carton. Immediately upon
receiving a fixture, carefully unpack the box. Check the box contents to
ensure that all parts are present and that they are in good condition.
If any part appears damaged from shipping, or if the box shows signs of
mishandling, notify the shipper immediately. In addition, retain the box and
all the packing material for inspection. In any event, save the carton and all
packing material because, in case that you have to return the fixture to the
factory, you will have to do so in its original box, with its original
packing.
What is included
- 1 Laser Party Light 1 Power Cable
- 1* Handle
- 2* Screw
- 1* User Manual
- 1* Remote Controller
Laser Safety Warnings
Potential laser injury hazard exists with this product! Read these Instructions carefully, which include important information about installation, safe use and service!
Caution
- Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser radiation.
- This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.
- It is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel could get direct laser beams or bright reflections into their eyes.
- It is a US Federal offense to shine any laser at aircraft.
NON-INTERLOCKED HOUSING WARNING
- This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation.
- The laser power levels accessible if the unit is opened can cause instant blindness, skin burns and fires.
Cleaning
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the internal
and external lenses should be carried out periodically to optimize light
output.
- Use normal glass cleaner and a soft cloth to wipe down the out- side casing.
- Clean the external optics with glass cleaner and a soft cloth every 20 days.
- Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp beam output.
Warranty Warnings
-
Damages caused by the disregard of this user manual are not subject to Warranty.
The dealer will not accept liability for any resulting defects or problems. -
Please consider that unauthorized modifications on the device are forbidden due to safety reasons. Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified persons are not subject to warranty.
-
If this device will be operated in any way different to the one described in this manual, it may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns electric shock, etc.
After trying the above solution you still have a problem, please contact your dealer or our company for service.
Introduction
Fixture Appearance & Size
Installation
- Laser effects projected 3 meters (9.8 ft) above the audience are eye-safe. A survey should be taken to assess the likelihood of any reflective surfaces (such as high windows, chrome bars etc.) bouncing stray beams back down into the audience.
- Using a fastening clamps on the light and tight to the ceiling in a strong hook.
- Make sure its correct power output and plug the power cable to the wall socket.
- Power must be in earth! Power on the light.
- Do not shoot the beams to the audience!
- Do not look direct into the laser aperture once the laser light is ON. Please pay attention to the Laser Danger Warning Label!
Laser Expected Lifespan
Laser gradually decline in brightness over time. HEAT is the dominant factor
that leads to the acceleration of this decline. Packaged in clusters, Laser
exhibit higher operating temperatures than in ideal or singular optimum
conditions. For this reason when all color Laser are used at their fullest
intensity, life of the Laser is significantly reduced. It is estimated that a
viable lifespan of 5,000 to 10,000 hours will be achieved under normal
operational conditions. If improving on this lifespan expectancy is of a
higher priority, place care in providing for lower operational temperatures.
This may include climatic-environmental and the reduction of overall
projection intensity.
Mounting Diagram
Operation
- LMENU: Function mode selection, such as DMX512/Masterslave, AUTO strobe,
- Sound Active Strobe, Constant light on, brightness adjustment
- DOWN/UP: previous or next, increase or decrease Enter: confirm and save the selection
Display menu
| AUTO mode | Aut1–Aut3 |
|---|---|
| Sound active mode | Sou1–Sou3 |
| Beam patterns | bAu1–bAu3 |
| Pulsation patterns | PAU1–PAU3 |
| Twinkling stars | SAu1–SAu3 |
| DMX address (21CH) | A001 – A512 |
DMX Channel
CH(21)| Description Value and
function
---|---
1| Special channel| 000-005 None
006-045 AUTO 1
046-085 AUTO 2
086-125 AUTO 3
126-165 Sound 1
166-205 Sound 2
206-245 Sound 3
246-255 None
2| Beam patterns Red laser| 000-255 Red dimmer
3| Beam patterns Green laser| 000-255 Green dimmer
4| Pulsation patterns red laser| 000-255 Red dimmer
5| Pulsation patterns blue laser| 000-255 Blue dimmer
6| Twinkling stars red laser| 000-255 Red dimmer
7| Twinkling stars green laser| 000-255 Green dimmer
8| Red LED| 000-255 Red LED dimmer
9| Green LED| 000-255 Green LED dimmer
10| Blue LED| 000-255 Blue LED dimmer
11| Strobe|
000-000 OFF
001-001 ON
002-255 Speed from slow to fast
12| DC Motor running 1| 000-255 Speed from slow to fast
13| DC Motor running 2| 000-255 Speed from slow to fast
14| DC Motor running 3| 000-255 Speed from slow to fast
15| Patterns| 000-010 Null
---|---|---
011-021 Pulsation Pattern 1
022-032 Pulsation Pattern 2
033-043 Pulsation Pattern 3
044-054 Pulsation Pattern 4
055-065 Pulsation Pattern 5
066-076 Pulsation Pattern 6
077-087 Pulsation Pattern 7
088-098 Pulsation Pattern 8
099-109 Pulsation Pattern 9
110-120 Pulsation Pattern 10
121-131 Pulsation Pattern 11
132-142 Pulsation Pattern 12
143-153 Pulsation Pattern 13
154-164 Pulsation Pattern 14
165-175 Pulsation Pattern 15
176-186 Pulsation Pattern 16
187-197 Pulsation Pattern 17
198-208 Pulsation Pattern 18
209-219 Pulsation Pattern 19
220-230 Pulsation Pattern 20
231-241 Pulsation Pattern 21
242-255 dots
16| Pan starting position| 000-127 Left
128-255 Night
17| Tilt starting position| 000-127 Up
128-255 Down
18| Patterns fixed-position running| 000-063 Original position
064-127 Turn 90°
128-191 Turn 180°
192-255 Turn 270°
19| Whole patterns spinning| 000-009 NULL
010-120 Pattern clockwise spinning from fast to slow
121-134 NULL
135-245 Pattern counter clockwise spinning from slow to fast
| | 246-255 NULL
---|---|---
20| Reverse spinning| 000-009 NULL
010-120 Pattern left/right reverse spinning from fast to slow
121-134 NULL
135-245 Pattern up/down reverse spinning from slow to fast
246-255 NULL
21| Zoom IN/OUT| 000-127 Pattern zoom in
128-255 Pattern zoom speed from slow to fast
Remote controller operation
Function
- the user can choose the sound activated, strobe, automatic mode with remote control.
- Under remote control mode, the remote controller works like a MINI DMX512 controller, can manually adjust the brightness of the color and control jumping, frequently flashing, rotating. Speed is adjustable
- Remote control distance is up to 5 Meters
Precautions
- Using infrared remote controller to control the machine running, the launch of the infrared remote controller must on the machine head of infrared receiving head.
- Infrared remote controller to control the machine run, infrared emission head sent via infrared data, if the machine can receive data correctly, LED digital display will flash once, if not Please check The launch of the infrared remote controller whether on the machine head of infrared receiving head.
- Power ON/OFF
- Strobe Light ON/OFF
- Laser Light ON/OFF
- LED Strobe Mode
- Laser Auto Run Mode
- Laser Jump Mode
- Strobe Sound Activated Mode
- Strobe Jump Sound Activated Mode
- Jump Sound Activated Mode
- Motor Start/Pause Rotation
- Motor Spinning Speed Increase
- Motor Spinning Speed Reduced
- Pulsation Patterns Auto Mode
- Pulsation Patterns Red Light
- Pulsation Patterns Blue Light
- Pulsation Patterns Blue&Red Light
- Beam Patterns Auto Mode
- Beam Patterns Red Light
- Beam Patterns Green Light
- Beam Patterns Red&Green Light
- Twinkling Stars Auto Mode
- Twinkling Stars Red Light
- Twinkling Stars Green Light
- Twinkling Stars Red&Green Light
Technical Specification
Feature
- Built-in many kinds of nice amazing effects
- Four working modes: AUTO, Sound Active, DMX512, Master/Slave
- Under DMX mode, user can set light ON/OFF, output lens selection with adjustable speed, flash output lens selection with adjustable speed,
spin direction with adjustable speed.
- LCD display with 4 digital button: Mode, UP, DOWN, ENTER
- Beam angle: 150 degrees
- Scanning Micro-step motor scanning at big angle
- Play Mode: Sound Active, AUTO, DMX512, Master/Slave
- DMX Channel: 21CH
- Interface: 3 pins XLR jack for DMX or Maser-Slave linking
- Power Supply: Bi-Voltage 110V to 220V-250V, 50/60HZ, 20W
- Net Weight: 1.4KG
- Applicable Place: DJs, Bands, Bars, Pubs, Clubs, KTV, Family Party, etc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>