rizoma M1000RR Turn Signal Cable Kit BMW User Manual

June 4, 2024
rizoma

User Manual Rev.: 00

Welcome to Rizoma

Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future.

General conditions

**Attention:**   This component comes assembled for shipping purposes only.  Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

  1. Carefully read, understand and follow these instructions, they are an essential part of the product.  If you have any doubt whatsoever regarding the installation or use of
    your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).

  2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.

  3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
    Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are
    leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never
    try to repair or modify the Rizoma products or their components, always replace them with Rizoma’s original components.
    Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your, safety Rizoma suggests to always contacting
    your RIZOMA dealer. O.E.M.: original equipment manufacturer.

Turn signal wiring kit

rizoma M1000RR Turn Signal Cable Kit BMW| rizoma M1000RR Turn Signal Cable Kit BMW - fig
---|---

**** Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. The warranty is not valid for any electric wire cutting or any product modification or tampering.rizoma M1000RR Turn Signal Cable Kit BMW - fig
1

INSTALLATION

-Step 1Your guarantee will not apply if the turn signal has not been correctly installed and connected to the electrical supply on your motorbike. Do not carry out the installation unless you are specifically trained to do so; otherwise, please contact an authorized dealer Rizoma. Your guarantee does not apply to damage due to wrong connection or excess voltage. improper mechanical installation or orientation of the turn signal may invalidate your motorbike’s roadworthiness and insurance protection, or even lead to accidents. Check that your turn signal are securely fitted before you ride your motorbike. Make sure that your motorbike is standing firmly before you Start work, as a fall may lead to damage to the motorbike or injury to you or others.

ELECTRIC CONNECTIONS

Step 2 Disconnect the battery before starting to install the resistors. To avoid damage to the electrical system of the bike, for the electrical connection of turn Signal and resistor we recommend using the Rizoma electric wiring. Consult the Rizoma catalog or the website www.Rizoma.com to choose the correct electric wiring. Arrange the wires to protect them from splash water and fasten them as appropriate, such as with wire connectors. Reconnect the motorbike battery and test the turn signal. Align the turn signal as described above. Install the resistors in such a way that heat can escape effectively. These measures may disable the rapid flashing function to alert the rider that one of the turn signal is no longer working. Check your turn signal before each motorcycle trip. These resistors will heat up if the turn signal is used for an extended period. Make sure that other components or people are safe.

CONNECTIONS TURN SIGNAL

rizoma M1000RR Turn Signal Cable Kit BMW - fig3

CONNECTIONS ORIGINAL WIRING RH SIDE

rizoma M1000RR Turn Signal Cable Kit BMW - fig4

CONNECTIONS ORIGINAL WIRING LH SIDErizoma M1000RR Turn Signal Cable Kit
BMW - fig5

Warnings

RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions. Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal note

Some of our products may not be approved for road circulation in the countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for different use of its products.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

rizoma User Manuals

Related Manuals