ZSZ MS-002 Keyless Entry Door Lock Installation Guide
- June 16, 2024
- ZSZ
Table of Contents
ZSZ MS-002 Keyless Entry Door Lock Installation Guide
Product Information
Specifications
- Model: MS-002
- Installation Manual: Included
Parts List
- Latch Screws x4
- Mounting Plate x1
Parts Identification
The product consists of the following parts:
- Latch Screws (x4): These screws are used to secure the product in place.
- Mounting Plate (x1): This plate is used for mounting the product.
Check door dimensions
Installation Manual (MS-002)
Please follow the steps below to install the product:
Step 1: Preparing for Installation
- Ensure that you have all the required parts listed in the parts list.
- Gather the necessary tools such as a screwdriver.
Step 2: Mounting the Product
- Locate a suitable spot for installation.
- Place the mounting plate on the desired surface and align it properly.
- Using the latch screws, secure the mounting plate firmly in place.
Step 3: Finalizing Installation
- Ensure that the product is securely mounted.
- Test the stability of the installation by gently applying pressure.
- If everything is secure, proceed to the next step.
Check door dimensions
How to adjust the length of the latch
Facing the side with the up sign, press your thumb against the deadbolt to ensure that it does not extend. Rotate it clockwise, then pull it out and rotate it counter clockwise until you hear a snap.
Install exterior assembly
- Ensure the deadbolt be in the unlock position
- Ensure the emergency M-key works normally
Install interior assembly
First startup
- When the lock first starts, it will automatically adapt to the actual running direction through unlocking and locking actions
- Reset the door lock:
- Press and hold the unlock/close button inside the door for 5 seconds
- Press the door unlock button
- Complete the factory reset
Check after installation
- Step 1: Enter default user code 123456 and unlock keyto check user code unlock function.
- Step 2: Check auto lock function: wait 10 seconds, the lock will automatically close.
- Step 3: Check hand knob open the lock: rotate the hand knob to smoothly open and close the lock.
- Step 4: Check unlock/lock button: click the button to open and close the lock normally.
- Step 5: Check emergency M-key: use emergency M-key can open and close the lock normally.
If all of these functions can be used normally, please use the Smart Lock Product Manual to start setting up your lock! If you have any questions, please contact customer service email: customersupport@zszeal.com
Frequently Asked Questions (FAQ)
Q: How many latch screws are included?
A: Four latch screws are included in the package.
Q: What is the purpose of the mounting plate?
A: The mounting plate is used to securely mount the product on a desired
surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>