Jantex Automatic Sanitiser Dispenser Instruction Manual
- June 6, 2024
- Jantex
Table of Contents
Jantex Automatic Sanitiser Dispenser
Pack Contents
x1
|
x1
---|---
x4
x4
Assembly
- All recommended fixings are supplied. Do not use less substantial fittings.
- Ensure the wall surface provides sufficient support for the product before proceeding to drill and install fixings.
- For cleaning, wipe the exterior surface with a soft, wet cloth occasionally.
- For step 7: For power supply, you can use either 4×1.5V batteries (Size C, not included) OR a DC adaptor (6V/1A, not included). Remove the batteries if using the adaptor or if the unit is not to be used for an extended period of time. Always unplug the adaptor when not in use to prevent overheating.
- For step 10: Before use, slide the ON/OFF switch downward (ON position) first.
Troubleshooting
| LED light Indications | Description and solution |
|---|---|
| Flashing green | Working normally |
| Flashing red x 2 | Obstacle under the sensor, remove the obstacle |
| Flashing red x 5 | Low battery, replace batteries or check the adaptor |
Technical Specifications
| Model | Power | Capacity | Sensing distance |
|---|---|---|---|
| FN975 | Adaptor, or 4×1.5V |
Batteries
| 1000ml| 8-12 cm
FN976
Compliance
Dispose of depleted batteries in accordance with local regulations, within the EC there are nominated disposal points for batteries.
The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.
Jantex parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent, and
federal authorities. Jantex products have been approved to carry the following
symbol:
DECLARATION OF CONFORMITY
| Equipment Type | Model |
|---|---|
| Liquid Automatic Sanitiser Dispenser Spray Automatic Sanitiser Dispenser |
FN975 FN976
Application of Territory Legislation & Council Directives(s)|
Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU – recast of
2004/108/EC
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II to Directive 2011/65/EU
| Electromagnetic Compatibility
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
Producer Name| Jantex
I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s) and Standard(s). Norma(s)
| Date | 22 nd October 2020 |
|---|---|
| Signature |  |
|
Full Name| Ashley Hooper| Eoghan Donnellan| Josie Holt
Position| Technical & Quality Manager| Commercial Manager/
Importer| Commercial Manager/ Responsible Supplier
Producer Address| Fourth Way, Avonmouth, Bristol, BS11
8TB United Kingdom| 42 North Point Business Park New Mallow
Road Cork Ireland| 15 Bagdally Road, Campbelltown NSW
2560
| UK | 0845 146 2887 |
|---|
Eire
NL| 040 – 2628080
FR| 01 60 34 28 80
BE-NL| 0800-29129
BE-FR| 0800-29229
DE| 0800 – 1860806
ES| 901-100 133
PT| vendas@nisbets.pt
AU| 1300 225 960
