40148 Lamp and Appliance Timer

Product Information: Lamp and Appliance Timer

Specifications

• Rating: 125 VAC / 60 Hz / 1875 W / 15 A (Tungsten and
  Resistive)

• UPC: 792363401487

• Item: 40148

Important Safety Information

When using the product, it is important to follow these safety
precautions to reduce the risk of personal injury and damage to
equipment:

1. Keep the Timer out of the reach of children.
2. Avoid having the Timer come into contact with water or other
   liquids.

WARNING! Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious
injury. Save these instructions.

Electrical Safety

1. Grounded products must be plugged into an outlet properly
   installed and grounded in accordance with all codes and
   ordinances.

2. WARNING! People with pacemakers should consult
   their physician(s) before using this product. Operation of
   electrical equipment in close proximity to a heart pacemaker could
   cause interference or failure of the pacemaker.

3. Check with a qualified electrician if you are in doubt as to
   whether the outlet is properly grounded.

4. If a grounded product should electrically malfunction or break
   down, grounding provides a low resistance path to carry electricity
   away from the user.

5. Note: Performance of this product (if powered by line voltage)
   may vary depending on variations in local line voltage. Extension
   cord usage may also affect tool performance.

Warning: Do not exceed the maximum Amperage of
15. Exceeding the maximum amperage of 15 Amps may result in
excessive heat and fire of the Digital Timer.

Warning: The warnings, cautions, and
instructions discussed in this manual cannot cover all possible
conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the
operator.

Product Usage Instructions

Controls

• Dial
• Power Switch
• Outlet

Operation

1. Set the current time by rotating the Dial so that the black
   arrow is pointing at the correct time. Note: The Timer uses a
   24-hour day (A.M. hours are 1 to 12, P.M. hours are 13 to 24).
   Example: 2 P.M. = 14.

2. Each Indicator around the Dial represents 15 minutes. Depress
   the Indicator to supply power to the Side Outlet at the designated
   time. Example: To set the Timer to go on at 8 P.M. and off at 6
   A.M., all indicators between 20 and 6 must be pressed down.

3. Plug appliance(s) into Outlets on either side of the
   Timer.

4. Slide the Power Switch up to turn the Timer on.

5. Move the Power Switch down to turn the Timer off.

Record Serial Number Here: [Serial Number]

FAQ (Frequently Asked Questions)

Q: What is the maximum amperage for this Timer?

A: The maximum amperage for this Timer is 15 Amps. Exceeding
this limit may result in excessive heat and fire.

Q: How do I set the Timer to turn on and off at specific

times?

A: To set the Timer to turn on and off at specific times, follow
these steps:

1. Rotate the Dial to set the current time.

2. Press down the Indicators around the Dial for the desired on
   and off times. Each Indicator represents 15 minutes.

3. Plug your appliance(s) into the Outlets on either side of the
   Timer.

4. Slide the Power Switch up to turn the Timer on.

5. Move the Power Switch down to turn the Timer off.

Q: Can I use an extension cord with this Timer?

A: Yes, you can use an extension cord with this Timer. However,
please note that extension cord usage may affect tool
performance.

Q: What should I do if the Timer malfunctions or breaks

down?

A: If the Timer malfunctions or breaks down, it is recommended
to unplug it from the outlet and contact our technical support at
1-888-866-5797 for assistance.

LAMP AND APPLIANCE TIMER

IMPORTANT SAFETY INFORMATION

WARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this product! 1. Keep the Timer out of the reach of children. 2. Avoid having the Timer come into contact with water or other liquids.
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS
ELECTRICAL SAFETY

1. Grounded products must be plugged

2. WARNING! TO PREVENT SERIOUS

into an outlet properly installed and

INJURY: People with pacemakers

grounded in accordance with all codes

should consult their physician(s)

and ordinances. Never remove the

before using this product. Operation of

grounding prong or modify the plug in

electrical equipment in close proximity

any way. Do not use any adapter plugs.

to a heart pacemaker could cause

Check with a qualified electrician if you

interference or failure of the pacemaker.

are in doubt as to whether the outlet is properly grounded. If a grounded product should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

Note: Performance of this product (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance.

The Lamp and Appliance Timer has a 3 Prong Plug

Grounding

The plug must be connected to a properly grounded outlet. If the Digital Timer should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock.
Warning: Do not exceed the maximum Amperage of 15. Exceeding the maximum amperage of 15 Amps may result in excessive heat and fire of the Digital Timer.
Warning: The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Specifications

Rating

125 VAC / 60 Hz / 1875 W / 15 A (Tungsten and Resistive)

UPC 792363401487
Item 40148

SAVE THESE INSTRUCTIONS
For technical questions, please call 1-888-866-5797.

23k
Page 1

Controls

Indicators Dial

Power Switch
Outlet

Operation

1. Set current time by rotating Dial so that the black arrow is pointing at the correct time.
Note: Timer uses a 24 hour day (A.M. hours are 1 to 12, P.M. hours are 13 to 24) Example: 2 P.M. = 14.

2. Each Indicator around the Dial represents 15 minutes. Depress Indicator to supply power to Side Outlet at designated time. Example: To set Timer to go on at 8 P.M. and off at 6 A.M., all indicators between 20 and 6 must be pressed down.
3. Plug appliance(s) into Outlets on either side of Timer. Slide Power Switch up to turn Timer on. Move Power Switch down to turn Timer off.

Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

UPC 792363401487
Page 2

SAVE THESE INSTRUCTIONS
For technical questions, please call 1-888-866-5797.

23k
Item 40148

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>