stauer 56406 Dual Time Tonneau Watch Instruction Manual

: June 16, 2024
: Stauer

Table of Contents

stauer 56406 Dual Time Tonneau Watch
Product Information
Product Usage Instructions
WATCH DISPLAY
TIME SETTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

stauer 56406 Dual Time Tonneau Watch

Product Information

Specifications

Dual time 24 hour hand
Dual time 24 hour dial (2nd time zone)
24 hour dial
Second hand
Date window

FAQ

Q: Where can I find more information about Stauer Watches?
- A: Visit us at www.stauer.com to learn more about the fantastic benefits of owning a Stauer Watch!

Product Usage Instructions

Time Setting

Pull out the crown (part C) to the 2nd position. Make sure the second hand (part F) is at the 12 o’clock position.
Turn the crown (part C) to set the hour and minute hands. Check that the 24 hour hand is set correctly.
Push the crown (part C) back to the zero (0) position when finished.

Note: The 24 hour hand (part E) moves correspondingly with the hour hand. Please make sure that AM/PM is correctly set by using the 24 hour hand as an AM/PM indicator.

Setting the 24 Hour Dial

Pull out the crown (part C) when the second hand (part F) is at the 12 o’clock position.
Press button A or B to adjust the time. Press Button A to move the hand counterclockwise. Press Button B to move the hand clockwise. Press and hold the button to fast-forward if desired.
Push the crown (part C) back to the zero (0) position when finished.

Resetting the 24 Hour Dial

Note: Before setting the time, check if the dual time 24 hour hand (part D) is in the 0 (24 o’clock) position. If the dual time 24 hour hand is not in the 0 position, reset the time with the following procedure:

Pull out the crown (part C) to the 2nd position.
Press and hold both A & B buttons for 2-3 seconds, then release them.
Press either button A or B to reset the dual time 24 hour hand to 0 (24 o’clock) position. Button A moves the hand counter-clockwise, and Button B moves the hand clockwise.
Push the crown (part C) back to the zero (0) position when finished.

Setting the Date

Pull out the crown (part C) to position 1.
Turn the crown clockwise until the correct date appears.
Push the crown (part C) back to the zero (0) position when finished.

Note: Do not set the date between 9:00 P.M. and 1:00 A.M.

WATCH DISPLAY

A. Dual time 24 hour hand (-1 hour/push)
B. Dual time 24 hour hand (+1 hour/push)
C. Crown
D. Dual time 24 hour dial (2nd time zone)
E. 24 hour dial
F. Second hand
G. Date window

TIME SETTING

TO SET THE TIME

Pull out the crown (part C) to the 2nd position. Make sure the second hand (part F) is at the 12 o’clock position.
Turn the crown (part C) to set the hour and minute hands. Check that 24 hour hand is set correctly
Push the crown (part C) back to the zero (0)position when finished.

NOTE: The 24 hour hand (part E) moves correspondingly with the hour hand. Please make sure that AM/PM is correctly set by using the 24 hour hand as an AM/PM indicator.

TO SET THE 24 HOUR DIAL

Pull out the crown (part C) when the second hand (part F)is at the 12 o’clock position.
Press the button A or B to adjust the time. Press Button A to move the hand counterclockwise. Press Button B to move the hand clockwise. Press and hold the button to fast-forward if desired.
Push the crown (part C) back to the zero (0)position when finished.

TO RESET THE 24 HOUR DIAL

NOTE: Before setting the time, check if the dual time 24 hour hand (part D) is in the “0”(24 o’clock) position. If the dual time 24 hour hand is not in the “0” position, reset time with the procedure below.

Pull out the crown (part C.) to the 2nd position.
Press & Hold both A & B buttons for 2-3 seconds, then release them.
Press either button A or B to reset the dual time 24 hour hand to “0” (24 o’clock) position. Button A moves the hand counter-clockwise, and Button B moves the hand clockwise.
Push the crown (part C) back to the zero (0)position when finished.

TO SET THE DATE