Kooao KAS14SM30L Space Light Bars User Manual
- June 16, 2024
- Kooao
Table of Contents
Smart Bulb Strings Light
USER MANUAL
Parameters
| Input: | AC 100-240V/ |
|---|---|
| Power Supply Power: | 36W |
| Color: | RGBIC+CCT |
| Working Temperature: | -20C t040C /-4 T to 104 F |
| Lifespan: | 20,000 hours |
| Dimmability: | Yes ( App/Voice/Button Controller/ Remote Controller) |
| Communication Protocol | WiFi+Bluetooth (2.4Ghz b/gin) |
| Compatible: | Google Assistant, Amazon Alexa |
Packing
15 Bulbs: Power Supply x 1, Button Controller x 1, Remote Controller x 1,
Bulbs x 15
30 Bulbs: Power Supply x 1, Button Controller x 1, Remote Controller x 1,
Bulbs x 30
Instructions for controller
Installation Instruction
-
Attach using guide wire with s-hooks or zip ties (not included)
-
Attach directly to structural support minimum every 24 ft. / 7.3m using hardware (not included).
Replacing light bulbs and connecting multiple sets
- Unscrew existing light bulb by twisting counterclockwise. Dispose of light bulb in appropriate manner
- Replace with E26 medium base light bulbs by screwing bulb into socket clockwise until the top of socket forms a tight seal around the bulb-this prevents moisture from geting into socket.
- Connect multiple sets.
Steps of Connection on Mobile
-
A smart phone o tablet with 10S 8.0 (or later) or Android 4.3 (or later).
-
Download the “Tuya Smart” App from the APP store (I0S devices) or Google Play (Android devices).
https://smartapp.tuya.com/tuyasmart -
Open on the Bluetooth, Wifi (2.4Ghz), and App. Click “+” and then click *Add Device” to search for nearby devices.
-
Press and hold on the “On / Off” button on controller for 10 seconds until the lamp flashes red color quickly to enter pairing mode.
-
After discovering the device,click “Add”.
-
Enter password and connect the Wifi (2.4Ghz), then click “Next”. Waiting for the connection.
-
Done!
Caution
To reduce the risk of fire, electric shock or injury to persons:
- Commercial grade string light is intended for installation indoors or outdoors.
- String lights must be supported by steel guide cables or other suitable supporting hardware such as s-hooks, zip ties or bolte (not included). Proper diameter cabling must be used for the maximum span distance between supports according to local building codes. See installation instructions for details.
- Light sockets must be installed base up so that bulbs are facing down ONLY.
- keep combustible material clear of bulbs with a minimum of 3 space from the nearest object.
- Do not cluster the bulbs.
- Not intended for installation in ceilings, soffits, cabinets of other enclosed spaces.
- Do not secure light strings to building or other structural supports using nails, staples or other sharp conducting materials that might damage the wires.
- Avoid damage to the insulation during installation. Do NOT pierce or otherwise compromise wire or socket outer covering.
- Periodically inspect wire and sockets for degradation due to weather, UV light or other damage. Discontinue use of worn out light string.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.