LIXUP LED Light Strip System Instructions
- June 16, 2024
- LIXUP
Table of Contents
LIXUP LED Light Strip System
Specifications
- Luminaire material: Aluminum, plastic, and diffuser
- Power: 115.2 W
- Lifetime criteria: 50,000 hours
- Color temperature: 5100 K
- Color rendering index (CRI): > 95
- Luminous flux: 19,200 lm (169.59 lm/W)
- Protection class: IP 44
- LED power supply: 220-240V, 200W, IP67
- Plug: IP 66
Product Description
The LED lamp is designed for workstation lighting and indoor lighting applications. It is made of aluminum, plastic, and diffuser materials. The lamp has a protection class of IP 44, making it suitable for use in environments with moderate moisture levels. The LED power supply operates at a voltage range of 220-240V and has an IP67 rating for dust and water resistance. Thelamp can be mounted without the need for any tools.
Safety Instructions
It is important to observe the national safety regulations for the installation and operation of this lamp. The manufacturer does not accept liability for any damage caused by improper use or installation. Before making any modifications to the fixture, ensure that the mains voltage is disconnected. Do not supply the device with a controlled socket with a dimmer.
Product Usage Instructions
Mounting the LED Light Strip System
- Attach the transformer and the 4-way splitter to the lifting platform using the integrated magnets.
- Lay the jumper cable on the opposite side of the lifting platform.
Cleaning
Do not clean the LED strips.
Installing the LED Strips
- Remove the protective film from the adhesive surface of the LED strips.
- Apply LixUp to the desired position and press firmly for at least 5 seconds.
- The recommended height from the floor for installation is approximately 70 cm.
- Ensure that no cables come into contact with the moving parts of the lifting platform.
Connecting the Plugs
Connect all plugs and turn the locking ring clockwise to achieve a tight connection of the plugs.
Powering On
Insert the Schuko plug into a suitable socket. The LED lamp will go into operation immediately.
Optional Dimmer-Kit Installation
- Connect the dimmer to the transformer.
- The lights and the cable bridge should be connected to the dimmer.
- Turn the locking ring clockwise to ensure a firm connection of the plugs.
- To turn on the lights, tap “ON” on the dimmer three times.
- To turn off the lights, wait for 10 seconds and then turn them on again within 3 seconds if the lights are already on.
FAQ
Q: Can I clean the LED strips?
A: No, it is not recommended to clean the LED strips.
Safety instructions
Instructions for use
- Application
- LED lamp for workstation lighting and indoor lighting application.
- Mounting without tool.
Illuminant
- LED power 115,2 W
- Lifetime criteria 50000 h
- Color temperature 5100 K
- Color rendering index CRI > 95
- Luminous flux 19200 lm (169.59 lm/W)
Product Description
- Luminaire is made of aluminum, plastic, and diffuser. One cable gland each for connection to the distribution boards. Lamp has protection class IP 44. LED power supply 220-240V 200W IP67 Plug IP 66
Safety
- The national safety regulations must be observed for the installation and operation of this lamp. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the fixture, the person who makes these modifications is considered the manufacturer. Disconnect the mains voltage before any intervention on the device. The device cannot be supplied by a controlled socket with a dimmer.
Rockvice GmbH®
- Kelvinstr. 33 |Hall 04 | 50996 Köln
- info@lix-up.de
- www.lix-up.de
intended use
- LED light strip system for mounting on lifting platforms indoors
Scope of delivery
Alignment
Seite.
Attach the transformer and 4-way splitter to the lifting platform by using the
integrated magnets. Then lay the jumper cable on the opposite side.
Cleaning
Clean the mounting surface with brake cleaner or pure alcohol.
Mounting the LED strips
remove the protective film from the adhesive surface and apply LixUp to the desired position. Press LixUp firmly for at least 5 seconds. The recommended height from the floor should be approx. 70 cm. Make sure that no cables come into contact with the moving parts of the lifting platform.
Connecting cables
Connect all plugs and turn the locking ring clockwise to achieve a tight connection of the plugs.
Connect power
Insert the Schuko plug into a suitable socket. LixUp goes into operation immediately.
Connecting Dimmer-Kit (optional)
- Connect the dimmer to the transformer.
- The lights and the cable bridge are connected to the dimmer. Turn the locking ring clockwise to ensure that the plugs are firmly connected
- Switch off the light, then switch it on again after 10 seconds.
- Press the “ON” button three times within 3 seconds when the light is on
- The light flashes 3 times to confirm.
- Model No: LixUp – Workshop light
- Input: 24V 30W | ta: 40 °C
References
- LixUp® | Das superschmale und moderne Lichtsystem für deine Hebebühnen
- LixUp® | Das superschmale und moderne Lichtsystem für deine Hebebühnen