ACEFAST E17 Desktop 3 in 1 Wireless Charging Holder User Guide

ACEFAST E17 Desktop 3 in 1 Wireless Charging Holder

Product Information

Specifications

• Model: E17
• Input: USB-C
• Output:
  • Wireless Charging Area: 5W / 7.5W / 10W / 15W (Max)
  • Watch Wireless Charging Area: 2.5W (Max)
  • Headset Wireless Charging Area: 3W (Max)
  • Total Output: 20.5W (Max)
• Cable: USB-A to USB-C, 1-meter length

Product Usage Instructions

Charging Devices

To charge your devices, follow these steps:

1. Connect the USB-C input of the charging holder to a power source using the provided cable.
2. Place your phone or watch on the respective wireless charging areas on the charging holder.
3. The ambient light will turn on and remain lit to indicate that the charging is in progress.

Charging Headset

To charge your headset, follow these steps:

1. Place your headset on the headset wireless charging area on the charging holder.
2. The headset indicator light and ambient light will turn on and remain lit to indicate that the charging is in progress.

Ambient Light Control

To control the ambient light, follow these steps:

1. Press the touch button on the charging holder to activate or deactivate the ambient light.
2. To adjust the intensity of the ambient light, press and hold the touch button until the desired brightness is reached.

FAQ

• Q: What devices are compatible with the E17 charging holder?
• A: The E17 charging holder is compatible with phones, watches, and headsets that support wireless charging.
• Q: Can I use any power adapter with the E17 charging holder?
• A: When using a power adapter with an output of 5V/3A or 9V/3A, the wireless charger supports a load of 5W. To ensure proper operation, it is recommended to use an adapter that supports fast charging of 15W or higher.

Product Diagram

Package Contents

• Wireless charging holder × 1
• Charging cable × 1
• Manual × 1

Thank you for purchasing the E17.
Please read this manual carefully and keep it in a safe place for future reference.
If you need assistance, please contact our support team with the product model number and Amazon order number.

Specifications

Light indicator

for 3 seconds to adjust the brightness of the ambient light

Notice
Applicable equipment

• Please check whether the device supports wireless charging, otherwise, it cannot be charged.

Adapter selection

• When using a 5V/3A, 9V/3A output adapter, the wireless charger supports a 5W load.
• To ensure the normal operation of the charger, it is recommended to use an adapter that supports fast charging of 15W or higher.

Other information

• Please do not place metal objects or magnetic cards in the charging area, which may cause the charger to heat up.
• It is normal to be slightly heated when the foreign body alarms.
• The battery of the mobile phone will heat up during the charging process.
• Do not place the charger near a fire source or corrosive environment.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance 20cm between the radiator & body.

Warranty card

• Model……………………………………………..Date…………………………………………………………
• Code……………………………………………….Order……………………………………………………….
• Name………………………………………………Phone………………………………………………………
• Add………………………………………………………………………………………………………………….

Product maintenance records

• Manufacturer: Shenzhen Houshuxia Technology Co.LTD
• Address: Rm203, 2nd Floor, Building C, Youth Pioneer Park, Jianshe East Road,
• Tsinghua Community, Longhua Street, Longhua District, Shenzhen, P. R. China

Product Care

• Keep away from liquids and extreme heat

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the mail below that corresponds with your region. Please include your Amazon order number and product mode number.

• Amazon US orders: support1@acefast.com.
• Amazon EU orders: support2@acefast.com.
• Amazon UK orders: support3@acefast.com.
• Amazon CA orders: support4@acefast.com.
• Amazon JP orders: support5@acefast.com.
• Other region orders: support6@acefast.com.

Please note, that ACEFAST can provide after-sales service for products purchased from any official ACEFAST store. If you have purchased from a local seller, you can also contact them directly for service or warranty issues.

References

• The domain name normal.la is for sale
• ACEFAST - High End Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>