Divoom PRO-MIC Microphone User Manual

: June 16, 2024
: Divoom

Table of Contents

PRODUCT OVERIEW
BLUETOOTH PAIRING
CONTROLS
KARAOKE
TF CARD
AUX
Live
CHARGING
SAFETY GUIDE
DECLARATION OF CONFORMFTY：
PRODUCT WARRANTY CARD
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Divoom PRO-MIC Microphone User Manual

PRODUCT OVERIEW

IN THE BOX

Spark-Pro

Spark-Pro-

**Charging Stations

Type-C Cable

AUX cable
**

BLUETOOTH PAIRING

Hold to power ON (LED = Blue)

Go to phone Settings>Bluetooth, please pair “Divoom Spark-Pro”

CONTROLS

Press: Karaoke Mode/Music Mode
Press: OTG Live Mode (only when the speaker is connected to phone or PC via cable)
Hold: BGM Only/Original
Press: Next Song
Hold: Next Folder(TF) /MODE
Press: Bluetooth/TF/AUX /TF卡/AUX)
Hold : Connect/Disconnect BT (TF: repeat song)

KARAOKE

**Press: Karaoke Mode

**

Hold: On/Off

Press: Change Sound Mode
Slide up/down to adjust the sound effect

LED: Solid Connected

To avoid cross-pairing your microphone with other speaker:

Pairing: 1 Tum on the speaker, and put it in music mode;
Long press the ON/OFFbutton of microphone for 10s when mic’s OFF (til the mic indicator blinks); 3 Switch speaker into Karaoke mode; 4 Short press the ON/OFF button of microphone-Complete pairing

Unpairing:

Tum on the speaker, and put it in music mode;
Long press the ON/OFF button of microphone for 10s when mic’s ON (til the mic indicator blinks);
Switch speaker into Karaoke mode; 4 Short press the ON/OFF button of microphone- Complete factory reset.

TF CARD

Insert TF Card will auto switch to TF audio mode
TF card Maximum: 128GB, Recommend: 32GB (.mp3 only

AUX

PC/Laptop: Use Cable

Live

Use professional Livestream cable (support charging function

CHARGING

LED (Red): Charging (100%=OFF)

Speaker Specs

Dimension: 159.2×95.1×277.5mm Weight: 1700g
Speaker size : 93Bass Driver
2×31 Tweeter Output: 80W
Frequency response: 60Hz-20KHz
Range: ≥10m
Signal-to-noise ratio : 82dB
Play time : 8hrs (depends on volume/audio types)
Battery : 54Wh
Charging time : 5h
Charging input : 5V-3A
Bluetooth version : 5.2

Microphone Specs
Dimension: 40×40×150.4mm
Weight: 317.8gg(Microphonex2) 134.3g(Charging dock) Frequency response: 50Hz-16KHz
Battery: 4.44Wh
UHF Bandwidth: 470-960Mhz (depends on country/area)
Transmitter Frequency: <10mW
Sensitivity: -50(±3)dB
Charge time: 3hrs
Charge input: 5V 2A (microphonex2)
Play time: ≥10h
Range: 27m

SAFETY GUIDE

Please read the following instructions carefully:

Please follow our product operation guides.
Operate the device on a smooth and stable surface to prevent falling.
Please keep the device in an open area. Do not block the surrounding of the device, which will help the ventilation of operation.
Do not force any device into the device port or slots. Do not apply any excess force to the device.
Please keep the device at a room temperature environment. Do not place the device near any excessive temperature source(like radiators, stoves, fire place, or direct sunlight). Do not place the device near any open flame source.
Do not attempt to service the device by yourself. Always refer to the instructions by a qualified service personnel.
To avoid the risk of electrical hazard, do not expose this device to wet surface.

DECLARATION OF CONFORMFTY：

This device meets the essential require ments of the following Directive 2014/53/EU cf the European parliament of the council of 16 April 2014.The waste container symbol with the X through it on the device indicates that the device must be disposed of separately from normal domestic waste at an appropriate waste disposal facility at the end of its useful service life
FCC STATEMENT :

This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which it can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. ncrease the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected. Consult the dealer or an experienced radio ATV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

WARRANTY INFORMATION:

This device is covered by a limited warranty from Divoom. For the complete warranty details, please visit the www.Divoom.com. If you believe your product is defective within the warranty period, please bring the product back to where the product was initially purchased. Alternatively, or within any other questions or concerns, please call customer support at +0755 86290767, or contact us via email at info@divoom.com.
If within 12(24 if required by local law) months of purchase this device or any part thereof is proven to be defective by reason of faulty workmanship or defects in materials, we will at our option repair or replace the same free of charge of labor or materials on condition that similar to the product current condition.
The sales invoice or receipt with the date and source of purchase must be presented together with the defective unit. We cannot validate the product warranty information without an invoice.
The warrant does not cover product failures which have been caused by use of accessories other peripheral devices which are non Divoom branded original accessories intended for use with the product.
The warranty does not cover product failures caused by: modification, repaired, and disassembled by any person who is not authorized by the manufacture.
The warranty is non transferable. Any defective unit or part shall become property of the manufacture.
Warranty does not cover any damage caused by misuse, drop, hit or negligent.
Customer is responsible for the return shipping charges.

PRODUCT WARRANTY CARD

Product name	Serial number
Purchasing store	Purchasing date
Owner name	Contact Email
Address

Official website : www.divoom.com/www.divoom- gz.com
Warranty Information: https://divoom.com/policies/refund-policy
Product FAQ : https://divoom.com/apps/help-center
Support Email: support@divoom.com
Contact number : 0755-86290791
Repair & return address: Shenzhen Divoom Technology Limited Corporation 1st Floor, 5th Building, XinLianHe Industrial Complex Shajing Town, Baoan District Shenzhen City, Guangdong Provinces 518000 The people’s republic of China.