Shenzhen Divoom Technology LOVELOCK Bluetooth Speaker User Guide

Shenzhen Divoom Technology LOVELOCK Bluetooth Speaker

NICE TO MEET YOU!
Lovelock is an ultra mini portable speaker by Divoom. With an fashionable design and incredible audio quality, Lovelock is full of musical talents. It can record up to one minute of audio message. You can also pair it with another Lovelock via its TWS function to further enhance the audio experience.

What’s included?

• Lovelock Speaker

• User manual

• USB Type-C charging cable

Thank you for purchasing a Divoom product! Please read this manual carefully. You can alsovisit www.divoom.com to learn more about our other products! Due to the nature of the technology product, the instructions on this manual are subject to change without prior notice. If you have any questions, please feel free to contact the Divoom customer support.

PRODUCT DETAILS

1. Record Button
   Press: Playback / Stop recording
   Hold: Sl:ilrt recording

2. Play/Volume Button
   Press: Playback/Pause/Answer call/End call Hold: Reject call/Activate(Deactivate) TWS mode Turn clockwise: increase volume
   Turn counter clockwise: Decrease volume Double Click: Next song
   Triple Click: Previous song

3. Power Button
   Hold 8 seconds: Power ON/OFF
   Double press: Disconnect Bluetooth

4. Bluetooth Indicator

5. **TYPE-C Charging Port/Indicator

**

HOW TO CONNECT IN BLUETOOTH?

1. Power ON the speaker, and make sure the Bluetooth indicator light@ is flashing in blue.
2. Go to the phone’s Settings > Bluetooth, and connect the “Divoom Lovelock”.
3. Once connected, start to play music.

*If the Bluetooth indicator light 4 shows solid blue (not flashing), the speaker might be connected to a different phone/tablet. You must disconnect the Bluetooth connection by double press on button@.

HOW TO ACTIVATE THE RECORDING FUNCTION?

1. Hold the record button CD to start the recording, the recording indicator will remain solid. Release the button G) to stop the recording.
2. Press the record button G) to play and loop the recorded audio. Press the button G) again to stop the playback.

HOW TO CONNECT THE TWS MODE?

1. Power on a speaker, and connect it with a smartphone. Hold the volume knob@ to activate the TWS mode.
2. Power on the other speaker, and hold its volume knob @ to activate its TWS mode. The two speakers to start to pair. Once paired, the Bluetooth LED light© will change from flashing to solid lit. Hold the volume knob to disconnect the TWS mode.

HOW TO CHARGE?

1. Connect the Type-C USB cable to the speaker’s charging port®·
2. When charging, the indicator ® will light up. Once fully charged, the indicator® will turn OFF.
3.  Please use a 5V=-=1A charger to charge the speaker.

SPEAKER SPECS

(Tested with a set environment/volume)
Frequency response:100Hz-20KHz
Signal-to-noise ratio:82dB

SAFETY GUIDE

Please read the following instructions carefully:

1. Please follow our product installation about operation instructions.
2. Always place the speaker on a smooth and stable surface.
3.  Please place the speaker on an open area for the best sound .Do not apply any great force on the speaker.
4. Please keep the speaker at a room temperature environment. Do not please the speaker near any heat sources (such as radiators, heat registers, stoves, fire place, or direct sunlight).
5. Do not place the speaker near any open flame source.
6. Do not attempt to service the speaker by yourself. Always refer to the instructions by qualified service personnel.
7. To avoid the risk of electrical hazard, do not expose this speaker towet sulface.

DECLARATION OF CONFORMFTY

Please dispose of used batteries properly following local regulations. Do NOT lancinate. Removal of the rechargeable lithium-ion battery. ln this product should be conducted only  qualified professional. ROHS This product is in compliance with Directive2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances ln electrical and electric .
This device compiles with Part iS of the FCC Rules. Operation ls subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation, changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty to operate the equipment.

   ---

NOTE: This equipment has been tested and found to comply with the limits or a Class digital device, pursuant the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates uses and can radio . it radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  that interference will not occur .lf this equipment  interference to radio or television reception, which it can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  increase the separation between the equipment and receiver.
• Connect then equipment into an outlet  circuit different from that to which the receivers connected. Consult the dealer or an experienced radio ATV technician for help.

WARRANTY INFORMATION

1. If you believe your product is defective within the warranty period, please bring the product back to where the product was initially purchased. Alternatively, or within any other questions or concerns, please call customer support at +0755 86290767, or contact us via email at info@divoom.com.
2. If within 12 (24 if required by local law) months of purchase this device or any part thereof is proven to be defective by reason of faulty workmanship or defects in materials, we will at our option repair or replace the same free of charge of labor or materials on condition that similar to the product current condition.
3. The sales invoice or receipt with the date and source of purchase must be presented together with the defective unit. We cannot validate the product warranty information without an invoice.
4. The warrant does not cover product failures which have been caused by use of accessories other peripheral devices which are not Divoom branded original accessories intended for use with the product.
5. The warranty does not cover product failures caused by: modification, repaired, and disassembled by any person who is not authorized by the manufacture.
6. The warranty is non transferable. Any defective unit or part shall become property of the manutacture.
7. Warranty does not cover any damage caused by misuse, drop, hit or negligent.
8. Customer is responsible for the return shipping charges.

WARRANTY INFORMATION
This product is covered by a limited warranty from Divoom. website For complete www.Divoom.com. warranty details, visit the This product is In compliance with Directive 2011/65/EU of the European Parliament and of the Council of June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>