tp-link DS105G Wall Mountable Switches User Guide

: June 16, 2024
: tp-link

Table of Contents

DS105G Wall Mountable Switches
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DS105G Wall Mountable Switches
User Guide

DS105G Wall Mountable Switches

tp link DS105G Wall Mountable Switches Wall Mounting Guide
Wall Mountable Switches
© 2023 TP-Link 1910013579 REV1.0.0

1.1 Wall Mounting Preparation
Before mounting the switch, you need to prepare the tools below:

A screw driver.
Two screws which complies to the corresponding standard. For details, see Wall Mounting Specification.

1.2 Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive two screws into the wall, then mount the switch on the wall. Note that the switch should be mounted on the wall upright rather than sideways. For TL- SF1008P/TL-SF1008LP/TL-SF1009P/ TL-SG1008P, the switch should be mounted with the ports facing downward and the LEDs facing upward.

Determine the location on the wall where you want to mount the switch.
Mark the wall where the two mounting holes are. The distance between the two marks
must be the same as that between the two mounting holes of the switch. For the wall mounting-holes distance, see Wall Mounting Specification.
Drive the screws into the wall at the marks using the screw driver. For the Screwhead-to-Wall Minimum Distance, see Wall Mounting Specification.
Mount the switch on the wall.

1.3 Wall Mounting Specification

Model| Screw Standard of ANSI B1.1| Minimum Length of Screw| Screw-Head-to-Wall Minimum Distance| Wall-Mounting-Holes Distance
---|---|---|---|---
DS105G| 4#, (5#), 6#, 8#| 7.5mm| 1.5mm| 39mm
DS105GE| 4#, (5#), 6#| 7.5mm| 1.5mm| 52mm
DS105G-M2| 4#, (5#), 6#| 7.5mm| 1.5mm| 52mm
DS105GP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
DS105X| 4#, (5#), 6#| 7.5mm| 1.5mm| 150mm
DS106GPP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
DS106P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
DS108G| 4#, (5#), 6#, 8#| 7.5mm| 1.5mm| 94mm
DS108GE| 4#, (5#), 6#| 7.5mm| 1.5mm| 110mm
DS108G-M2| 4#, (5#), 6#| 7.5mm| 1.5mm| 110mm
DS108GP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
DS110GMP| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
Model| Screw Standard of ANSI B1.1| Minimum Length of Screw| Screw-Head-to-Wall Minimum Distance| Wall-Mounting-Holes Distance
---|---|---|---|---
DS111P| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
DS116GE| 4#, (5#), 6#| 8.5mm| 1.5mm| 200mm
ES205G| 4#, (5#), 6#| 11mm| 4.5mm| 52mm
ES205GP| 4#| 10mm| 4.5mm| 39mm
ES210GP| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
LS1005G| 4#, (5#), 6#| 8.5mm| 2.5mm| 38mm
LS1008G| 4#, (5#), 6#| 8.5mm| 2.5mm| 48mm
LS105G| 4#, (5#), 6#| 7.5mm| 1.5mm| 76mm
LS105GP| 4#, (5#), 6#| 7.5mm| 1.5mm| 65mm
LS105LP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
LS106LP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
LS108G| 4#, (5#), 6#| 7.5mm| 1.5mm| 65mm
LS108GP| 4#, (5#), 6#| 7.5mm| 1.5mm| 65mm
LS109P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
LS1210GP| 4#, (5#), 6#| 7.5mm| 1.5mm| 150mm
S4500-16GP| 4#, (5#), 6#| 8.5mm| 1.5mm| 200mm
S4500-8G| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
S4500-8GP| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
S4500-8GP2F| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
SG2008| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
SG2008P| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
SG2016P| 4#, (5#), 6#| 8.5mm| 1.5mm| 200mm
SG2210P| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
SG2210XMP-M2| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
T1500G-8T| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
TL-RP108GE| 4#, (5#), 6#| 8.5mm| 1.5mm| 65mm
TL-SF1005LP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SF1005P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SF1006P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SF1008LP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
TL-SF1008P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
Model| Screw Standard of ANSI B1.1| Minimum Length of Screw| Screw-Head-to-Wall Minimum Distance| Wall-Mounting-Holes Distance
---|---|---|---|---
TL-SF1009P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
TL-SF1016D| 4#, (5#), 6#| 9mm| 3mm| 157.2mm
TL-SG1005D| 4#| 10mm| 4.5mm| 60mm
TL-SG1005LP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SG1005P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SG1005P-PD| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SG1006PP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SG1008D| 4#| 10mm| 4mm| 100mm
TL-SG1008P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
TL-SG105| 4#, (5#), 6#, 8#| 7.5mm| 1.5mm| 39mm
TL-SG105E| 4#, (5#), 6#| 7.5mm| 1.5mm| 52mm
TL-SG105-M2| 4#, (5#), 6#| 7.5mm| 1.5mm| 150mm
TL-SG105MPE| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SG105PE| 4#, (5#), 6#, 8#| 7.5mm| 1.5mm| 39mm
TL-SG105PP-M2| 4#, (5#), 6#| 7.5mm| 1.5mm| 150mm
TL-SG105S| 4#, (5#), 6#, 8#| 7.5mm| 1.5mm| 39mm
TL-SG105S-M2| 4#, (5#), 6#| 7.5mm| 1.5mm| 52mm
TL-SG108| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SG108E| 4#, (5#), 6#| 7.5mm| 1.5mm| 110mm
TL-SG108-M2| 4#, (5#), 6#| 7.5mm| 1.5mm| 150mm
TL-SG108PE| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SG108S| 4#, (5#), 6#, 8#| 7.5mm| 1.5mm| 94mm
TL-SG108S-M2| 4#, (5#), 6#| 7.5mm| 1.5mm| 110mm
TL-SG116| 4#, (5#), 6#| 8.5mm| 1.5mm| 200mm
TL-SG116E| 4#, (5#), 6#| 8.5mm| 1.5mm| 200mm
TL-SG116P| 4#, (5#), 6#| 8.5mm| 1.5mm| 200mm
TL-SG1210MP| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
TL-SG1210MPE| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
TL-SG1210P| 4#, (5#), 6#| 7.5mm| 1.5mm| 150mm
TL-SG1210PP| 4#, (5#), 6#| 7.5mm| 1.5mm| 150mm
TL-SG2008| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
Model| Screw Standard of ANSI B1.1| Minimum Length of Screw| Screw-Head-to-Wall Minimum Distance| Wall-Mounting-Holes Distance
---|---|---|---|---
TL-SG2008P| 4#，，5#，，6#| 8.5mm| 1.5mm| 150mm
TL-SG2016P| 4#，，5#，，6#| 8.5mm| 1.5mm| 200mm
TL-SG2210P| 4#，，5#，，6#| 8.5mm| 1.5mm| 150mm
TL-SG605| 4#, (5#), 6#, 8#| 7.5mm| 1.5mm| 39mm
TL-SG605E| 4#, (5#), 6#| 7.5mm| 1.5mm| 52mm
TL-SG605P| 4#, (5#), 6#, 8#| 7.5mm| 1.5mm| 39mm
TL-SG608| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SG608E| 4#, (5#), 6#| 7.5mm| 1.5mm| 110mm
TL-SG608P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
TL-SL1311MP| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
TL-SL1311P| 4#, (5#), 6#| 8.5mm| 1.5mm| 150mm
TL-SX105| 4#, (5#), 6#| 7.5mm| 1.5mm| 150mm