Dingshang DS8060-L LED Makeup Mirror Instruction Manual
- June 16, 2024
- Dingshang
Table of Contents
INSTRUCTION MANUAL
LED Hollywood Style
Vanity Mirror
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
BUTTON CONTROLS
| 1. Short press to next song
2. long press to adjust the volume
---|---
| 1. Short press to the previous song
2. long press to adjust the volume
| Turn on the Bluetooth function
| 1. Short press to control the switch and change the light color
2. Long press to adjust brightness
CONTAINED ITEMS
Input 110-240V Output 12V 2A
12V Power Adapter
Please use included power adapter, Do not use an unsuitable power adapter, otherwise it could damage the mirror electronics.
PRODUCT SIZE
CONTAINED ITEMS
INSTALLATION STEPS
Preparation Tools ( Not Included ) :
Desktop
Step 1
Unscrew the screws at the bottom of the mirror.
Step 2
Align the holes on the base and the bottom of the mirror, and tighten the
screws.
Step 3
Installation is completed.
Wall-mounted
Step 1
Use tape to measure the distance between the two hooks.
Step 2
Use pencil to draw parallel lines on the wall, The intersection is the punch
position.
Step 3
Use electric drill to punch holes at the intersection.
Step 4
Use hammer to drive the expansion tube into the hole
Step 5
Use screwdriver to screw the screw into the expansion tube.
Step 6
Hang up the mirror, installation is completed.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance couldvoid the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>