Divoom SPARK-PRO Bluetooth Speaker User Manual

June 16, 2024
Divoom

User Manual SPARK-PRO Bluetooth Speaker

IN THE BOX

Divoom SPARK PRO Bluetooth Speaker - Box

BLUETOOTH PAIRING

Divoom SPARK PRO Bluetooth Speaker - PairingHold to power ON (LED• Blue)
Go to phone Settings>Bluetooth, please pair “Divoom Spark-Pro·

CONTROLS

Divoom SPARK PRO Bluetooth Speaker - Control KARAOKE

Divoom SPARK PRO Bluetooth Speaker - Karaoke To avoid cross-pairing your microphone with other speaker:

  1. Pairing:1 DTurn on the speaker, and putitin music mode;2 Long press the ON/OFFbutton of microphone for 10s when mic’s OFF (til the mic indicator blinks) ;3 Switch speaker into Karaoke mode;4 Short press the ON/OFF button of microphone – Complete pairing
  2. Unpairing:1Tum on the speaker, and put it in music mode;
    2 Long press the ON/OFF button of microphone for 10s when mic’s ON (til the mic indicator blinks) ; 3 Switch speaker into Karaoke mode;4 Short press the ON/OFF button of microphone – Complete factory reset.

TF CARD

Divoom SPARK PRO Bluetooth Speaker - Card Insert TF Card will auto switch to TF audio mode

  • TF card Maximum: 128GB,
    Recommend: 32GB (.mp3 only)
    AUXDivoom SPARK PRO Bluetooth Speaker - Card 1

OTG LiveDivoom SPARK PRO Bluetooth Speaker - Card
3

CHARGING

Divoom SPARK PRO Bluetooth Speaker - Card 4

TECH SPEC
Speaker Specs
Dimension: 159.2×95.1×277.5mm
Weight: 1700g
Speaker size: 93Bass Driver 2×31 Tweeter
Output: 80W
Frequency response: 60Hz-20KHz
Range: ≥10m
Signal-to-noise ratio: 82dB
Play time: 8hrs (depends on volume/audio types)
Battery: 54Wh
Charging time: 5h
Charging input: 5V 3A
Bluetooth version: 5.2 Microphone Specs
Dimension: 40x40x150.4mm
Weight: 317.8gg(Microphonex2) 134.3g(Charging dock)
Frequency response: 50Hz-16KHz
Battery: 4.44Wh
UHF Bandwidth: 470-960Mhz (depends on country/area)
Transmitter Frequency: <10mW
Sensitivity: -50(+3)dB
Charge time: 3hrs
Charge input: 5V
2A (microphonex2)
Play time: ≥10h
Range: ≥7m

SAFETY GUIDE

Please read the following instructions carefully:

  1. Please follow our product operation guides.
  2. Operate the device on a smooth and stable surface to prevent falling.
  3. Please keep the device in an openarea. Do not block the surrounding of the device, which will help the ventilation of operation.
  4. Do not force any device into the device port or slots. Do not apply any excess force to the device.
  5. Please keep the device at a room temperature environment. Do not place the device near any excessive temperature source(like radiators, stoves, fire place, or direct sunlight). Do not place the device near any open flame source.
  6. Do not attempt to service the device by yourself. Always refer to the instructions by a qualified service personnel.
  7. To avoid the risk of electrical hazard, do not expose this device to wet surface.

DECLARATION OF CONFORMFTY:

** This device meets the essentialrequire ments of the following Directive 2014/53/EU cf the European parliament of the council of 16 April 2014.The waste container symbol with the X through it on the device indicates that the device must be disposed of separately from normal domestic waste at an appropriate waste disposal facility at the end of its useful service life.
Please dispose of used batteries properly following local regulations. Do NOT Incinerate. Removal of the rechargeable lithium-ion battery. In this product should be conducted only by a qualified professional.
ROHS This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 1 July 2011 onthe restriction of the use of certain hazardous substances In electrical and electric equipment.
FCC STATEMENT :
This device compiles with Part 15 of the FCC Rules. Operation Is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which it can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
ncrease the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected.
Consult the dealer or an experienced radio ATV technician for help.
RF warning statement:**
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

WARRANTY INFORMATION:

  1. Thisdevice is covered by a limited warranty from Divoom. For the complete warranty details, please visit the www.Divoom.com. If you believe your product is defective within the warranty period, please bring the product back to where the product wasinitially purchased. Alternatively, or withinany other questions or concerns, please call customer support at +0755 86290767, or contact us via email at info@divoom.com.
  2. If within 12(24 if required by local law) months of purchase this device or any part thereof is proven to be defective by reason of faulty workmanship or defects in materials, we will at our option repair or replace the same free of charge of labor or materials on condition that similar to the product current condition.
  3. The sales invoice or receipt with the date and source of purchase must be presented together with the defective unit. We cannot validate the product warranty information without an invoice.
  4. The warrant does not cover product failures which have been caused by use of accessories other peripheral devices which are non Divoom branded original accessories intended for use with the product.
  5. The warranty does not cover product failures caused by: modification, repaired, and disassembled by any person who is not authorized by the manufacture.
  6. The warranty is non transferable. Any defective unit or part shall become property of the manufacture.
  7. Warranty does not cover any damage caused by misuse, drop, hit or negligent.
  8. Customer is responsible for the return shipping charges.

PRODUCT WARRANTY CARD

Product name| | Serial number|
---|---|---|---
Purchasing store| | Purchasing date|
Owner name| | Contact Email|
Address|

Official website: www.divoom.com/www.divoom- gz.com
Warranty Information: https://divoom.com/policies/refund-policy
Product FAQ: https://divoom.com/apps/help-center
Support Email: support@divoom.com
Contact number: 0755-86290791
Repair & return address:Shenzhen Divoom Technology Limited Corporation
1st Floor, 5th Building, XinLianHe Industrial Complex
Shajing Town, Baoan District Shenzhen City, Guangdong Provinces 518000
The peoples republic of China.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals