RenewAire CA3XIN Energy Recovery Module Instructions
- June 16, 2024
- RenewAire
Table of Contents
RenewAire CA3XIN Energy Recovery Module
Product Information
CSI Specification
- To view RenewAire product data to include unit description, catalog and instruction manuals, go to www.renewaire.com/our-ervs/
- This product is available in multiple different configurations. The unit is typically installed as an element of a building HVAC system.
- Questions regarding this product should be directed to your local RenewAire authorized representative. To locate your local rep, go to www.renewaire.com/how-to-buy/find-a-dealer/ and select your region.
Product Usage Instructions
GENERAL
SUMMARY
This section includes Air-to-Air Energy Recovery Ventilators for indoor
installation. Within this document, these units may be referred to as Energy
Recovery Ventilator (ERV) for brevity.
RELATED
Drawing and general provisions of the contract, including General
Requirements Division 01, Division 23 Specifications Sections, and common work
requirements for HVAC apply to work specified in this section.
Section 23 09 00: Controls and Instrumentation
SUBMITTALS
LEED Submittals: Provide data for prerequisite E01:
- Documentation indicating that units comply with ASHRAE 62.1-2010, Section 5 Systems and Equipment.
- Shop Drawings: For air-to-air energy recovery ventilators, include plans, elevations, sections, details, and attachments to other work.
- Detail equipment assemblies and indicate dimensions, weights, loads, required clearances, method of field assembly, components, and location and size of each field connection.
- Operation and maintenance data for air-to-air energy recovery ventilator
QUALITY ASSURANCE
The energy recovery cores used in these products shall be third party
Certified by AHRI under its Standard 1060 for Energy Recovery Ventilators.
AHRI published certifications shall confirm manufacturer’s published
performance for airflow, static pressure, temperature and total effectiveness,
purge air (OACF) and exhaust air leakage (EATR). Products that are not
currently AHRI certified will not be accepted. OACF shall be no more than 1.02
and EATR shall be at 0% against balanced airflow.
COORDINATION
Coordinate size and location of all building penetrations required for
installation of each Energy Recovery Ventilator and associated electrical
systems. Coordinate sequencing of construction for associated plumbing, HVAC,
electrical supply.
MANUFACTURERS
- Available Manufacturers: Subject to compliance with specifications contained within this document, manufacturers offering products that may be incorporated into the work include, but are not limited to:
- RenewAire Manufacturer should be in business for minimum 10 years manufacturing energy recovery ventilators.
MANUFACTURED UNITS
Air-to-Air Energy Recovery Ventilators shall be fully assembled at the factory
and consist of a fixed-plate cross-flow heat exchanger with no moving parts,
an insulated [single][double] wall G90 galvanized 20-gauge steel cabinet,
filter assemblies for both intake and exhaust air, enthalpy core, with all
specified components and internal accessories factory installed and tested.
Entire unit with the exception of field-installed components shall be
assembled and test operated at the factory.
Specifications
- Product Type: Air-to-Air Energy Recovery Ventilator
- Installation: Indoor
- Manufacturer: RenewAire
- Core Certification: AHRI Standard 1060
- Core Performance: Airflow, Static Pressure, Temperature, Total Effectiveness, Purge Air (OACF), Exhaust Air Leakage (EATR)
- OACF Limit: 1.02
- EATR Limit: 0% against balanced airflow
FAQ
-
Where can I find RenewAire product data and manuals?
You can visit www.renewaire.com/our-ervs/ to access RenewAire product data, including unit description, catalog, and instruction manuals. -
How long should the manufacturer be in business?
The RenewAire Manufacturer should be in business for a minimum of 10 years manufacturing energy recovery ventilators. -
Who should I contact for questions about this product?
For any questions regarding this product, please reach out to your local RenewAire authorized representative. You can find your local representative by visiting www.renewaire.com/how-to-buy/find-a-dealer/ and selecting your region.
INTRODUCTION
- Note to User: This document is subject to copyright protection and is proprietary to RenewAire, LLC. However, RenewAire authorizes the user a limited non-exclusive license to use this document or portions of it for the purpose of preparing written product specifications for the above CSI MasterFormat category. All information in this document as provided by RenewAire, LLC is informational in nature and is provided without representation or warranty of any kind as to the user or any other party, including, without limitation, ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR NON-INFRINGEMENT. To the greatest extent permitted by applicable law, RenewAire assumes no liability, and User assumes all liability and risk, for the use or results from the use of this document or the information contained herein, whether as modified by the user or not. Users should consult www.renewaire.com to verify that this document represents the most current version.
- To view RenewAire product data to include unit description, catalog and instruction manuals, go to www.renewaire.com/our-ervs/
- This product is available in multiple different configurations. The unit is typically installed as an element of a building HVAC system.
- Questions regarding this product should be directed to your local RenewAire authorized representative. To locate your local rep, go to www.renewaire.com/how-to-buy/find-a-dealer/ and select your region.
GENERAL
SUMMARY
- This section includes Air-to-Air Energy Recovery Ventilators for indoor installation.
- Within this document, these units may be referred to as Energy Recovery Ventilator (ERV) for brevity.
RELATED
- Drawing and general provisions of the contract, including General Requirements Division 01, Division 23 Specifications Sections, and common work requirements for HVAC apply to work specified in this section.
- Section 23 09 00: Controls and Instrumentation
SUBMITTALS
-
Product data: For each type or model of Energy Recovery Ventilator, include the following:
- Unit performance data for both Supply Air and Exhaust Air, with system operating conditions indicated.
- Enthalpy plate performance data for both summer and winter operation.
- Dimensioned drawings for each type of installation, showing isometric and plan views, to include location of attached ductwork and service clearance requirements.
- Estimated gross weight of each installed unit.
- Filter types, quantities, and sizes
- Installation, Operating and Maintenance manual (IOM) for each model.
-
LEED Submittals:
Provide data for prerequisite E01: Documentation indicating that units comply with ASHRAE 62.1-2010, Section 5 -“Systems and Equipment”. -
Shop Drawings: For air-to-air energy recovery ventilators, include plans, elevations, sections, details, and attachments to other work.
Detail equipment assemblies and indicate dimensions, weights, loads, required clearances, method of field assembly, components, and location and size of each field connection. -
Operation and maintenance data for air-to-air energy recovery ventilator
QUALITY ASSURANCE
- Source Limitations: Obtain Air-to-Air Energy Recovery Ventilator with all appurtenant components or accessories from a single manufacturer.
- For the actual fabrication, installation, and testing of work under this section, use only thoroughly trained and experienced workers completely familiar with the items required and with the manufacturer’s current recommended methods of installation.
- The ERV core shall be warranted to be free of manufacturing defects and to retain its functional characteristics, under circumstances of normal use, for a period of ten (10) years from the date of purchase. The balance-of-unit shall be warranted to be free of manufacturing defects and to retain its functional characteristics, under circumstances of normal use, for a period of two (2) years from the date of installation.
- Manufacturer shall be able to provide evidence of independent testing of the core by Underwriters Laboratory (UL), verifying a maximum flame spread index (FSI) of 25 and a maximum smoke developed index (SDI) of 50 thereby meeting NFPA90A and NFPA 90B requirements for materials in a compartment handling air intended for circulation through a duct system. The method of test shall be UL Standard 723.
- Certifications:
The energy recovery cores used in these products shall be third party Certified by AHRI under its Standard 1060 for Energy Recovery Ventilators. AHRI published certifications shall confirm manufacturer’s published performance for airflow, static pressure, temperature and total effectiveness, purge air (OACF) and exhaust air leakage (EATR). Products that are not currently AHRI certified will not be accepted. OACF shall be no more than 1.02 and EATR shall be at 0% against balanced airflow.
COORDINATION
- Coordinate size and location of all building penetrations required for installation of each Energy Recovery Ventilator and associated electrical systems.
- Coordinate sequencing of construction for associated plumbing, HVAC, electrical supply.
PRODUCTS
MANUFACTURERS
-
Available Manufacturers: Subject to compliance with specifications contained within this document, manufacturers offering products that may be incorporated into the work include, but are not limited to:
RenewAire -
Manufacturer should be in business for minimum 10 years manufacturing energy recovery ventilators.
MANUFACTURED UNITS
Air-to-Air Energy Recovery Ventilators shall be fully assembled at the factory
and consist of a fixed-plate cross-flow heat exchanger with no moving parts,
an insulated [single][double] wall G90 galvanized 20-gauge steel cabinet,
filter assemblies for both intake and exhaust air, enthalpy core, with all
specified components and internal accessories factory installed and tested.
Entire unit with the exception of field-installed components shall be
assembled and test operated at the factory.
CABINET
- Materials: Formed [single][double] wall insulated metal cabinet, fabricated to permit access to internal components for maintenance.
- Outside casing : 20 gauge, galvanized (G90) steel meeting ASTM A653 for components that do not receive a painted finish.
- Access doors shall be hinged with airtight closed cell foam gaskets. Door pressure taps, with captive plugs, shall be provided for cross-core pressure measurement allowing for accurate airflow measurement.
- Unit shall have factory-installed duct flanges on all duct openings.
- Cabinet Insulation: Unit walls and doors shall be insulated with 1 inch, 4 pound density, foil/scrim faced, high density fiberglass board insulation, providing a cleanable surface and eliminating the possibility of exposing the fresh air to glass fibers, and with a minimum R-value of 4.3 (hr-ft2-°F/BTU).
- Enthalpy core: Energy recovery core shall be of the total enthalpy type, capable of transferring both sensible and latent energy between airstreams. Latent energy transfer shall be accomplished by direct water vapor transfer from one airstream to the other, without exposing transfer media in succeeding cycles directly to the exhaust air and then to the fresh air. No condensate drains shall be allowed. The energy recovery core shall be designed and constructed to permit cleaning and removal for servicing. The energy recovery core shall have a ten year warranty. Performance criteria are to be as specified in AHRI Standard 1060.
- Passive Frost Control: The ERV core shall perform without condensing or frosting under normal operating conditions (defined as outside temperatures above -10ºF and inside relative humidity below 40%). Occasional more extreme conditions shall not affect the usual function, performance or durability of the core. No condensate drains will be allowed.
FILTER SECTION
ERV shall have 2″ thick [MERV 8][MERV 13] disposable pleated filters located
in the outdoor air and exhaust airstreams. All filters shall be accessible
from the exterior of the unit.
EXECUTION
EXAMINATION
- Prior to start of installation, examine area and conditions to verify correct location for compliance with installation tolerances and other conditions affecting unit performance. See unit IOM.
- Examine roughing-in of plumbing, electrical and HVAC services to verify actual location and compliance with unit requirements. See unit IOM.
- Proceed with installation only after all unsatisfactory conditions have been corrected.
INSTALLATION
- Installation shall be accomplished in accordance with these written specifications, project drawings, manufacturer’s installation instructions as documented in manufacturer’s IOM, Best Practices and all applicable building codes.
- Install unit with clearances for service and maintenance.
CONNECTIONS
- In all cases, industry Best Practices shall be incorporated. Connections are to be made subject to the installation requirements shown above.
- Duct installation and connection requirements are specified in Division 23 of this document.
FIELD QUALITY CONTROL
Contractor to inspect field assembled components and equipment installation.
Report results to Architect/Engineer in writing. Inspection must include a
complete startup checklist to include (as a minimum) the following: Completed
Start-Up Checklists as found in manufacturer’s IOM. Insert any other
requirements here.
START-UP SERVICE
Contractor to perform startup service. Clean entire unit, comb coil fins as
necessary, and install clean filters. Refer to Division 23 “Testing, Adjusting
and Balancing” and comply with provisions therein.
DEMONSTRATION AND TRAINING
Contractor to train owner’s maintenance personnel to adjust, operate and
maintain the entire Make-Up Air unit. Refer to Division 01 Section Closeout
Procedures and Demonstration and Training.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>