Flying Tech Sequre S60 Nano Soldering Iron Pen Instruction Manual

Product
Instruction Manual
S20 I S60 Nano Precision
Electric Soldering Iron

Thank you for using this product, please read the manual carefully before use to avoid mistakes in your operation.

Product Overview

S20/S60 precision intelligent soldering iron come with an OLED display, supports PD2.0/3.0, QC2.0/3.0, DC power supply, programmable firmware upgrade, custom boot LOGO, switch between Celsius and Fahrenheit, can calibrate and compensate for temperature, intelligent temperature control up to plus or minus 1%, using a high-quality heating element, extremely fast melting tin, suitable for precision welding maintenance.

Product Parameters

Menu Introduction

1. Main Interface
   Main
   Interface| Icon Display| Icon Description| Operation Method
   ---|---|---|---
   1| Stop| Stop mode| Long Press the A key to switch between the working mode
   Work| Working mode| and the stop mode.
   Sleep| Sleep mode| /
   C-T| Soldering iron tip warning| Please re-adjust the position of the soldering iron tip or replace it.
   After the warning condition is removed, the warning icon automatically changes to Stop.
   H-V| High voltage warning| Please reduce the power supply voltage, use a suitable power supply. After the warning condition is removed, the warning icon automatically changes to Stop.
   H-T| High temperature warning| Please disconnect the power supply, cool down the soldering iron tip to room temperature, and then reconnect. After the warning condition is removed, the warning icon automatically changes to Stop.
   L-V| Low voltage warning| Please increase the supply voltage or decrease the LowVolt setting value. After the warning condition is removed, the warning icon automatically changes to Stop.
   P-T| PCB high temperature warning| Please disconnect the power supply, cool down the soldering iron to room temperature, and then reconnect. After the warning condition is removed, the warning icon automatically changes to Stop.
   2| 9V / 12V| Supply voltage| /
   3| 300°C| Soldering iron tip temperature| /
   Check Tip| Soldering iron tip warning| Please re-adjust the position of the soldering iron tip or replace it.
   High-V| High voltage warning| Please reduce the power supply voltage, use a suitable power supply.
   High-T| High temperature warning| Please disconnect the power supply, cool down the soldering iron tip to room temperature, and then reconnect
   Low-V| Low voltage warning| Please increase the supply voltage or decrease the LowVolt setting value.
   Pcb-T| PCB high temperature warning| Please disconnect the power supply, cool down the soldering iron to room temperature, and then reconnect.
   4| 300°C| Working temperature setting value| Short press A key or B key to set working temperature value.
   5| | Power progress bar| /
   6| | Working power| Enter Power to set the maximum working power.
2. Level 1 menu / Level 2 menu
   Level 1 menu| Level 2 menu| Description| Default value| Setting range
   ---|---|---|---|---
   Iron| 1.Tcomp| Temperature compensation| 0°C| -20°C-20°C
   2.Buzzer| Buzzer| ON| OFF/ON
   3.TempUnit| Temperature unit| °C| °C/°F
   4.WorkTemp| Operating temperature| 300°C| 50°C-500°C
   5.StartHea| Automatic heating when power on| OFF| OFF/ON
   6.FactorySet| Restore factory settings| OFF| OFF/ON
   7.TempShield| The temperature display is stable| ON| OFF/ON
   8.TempStep| Working temperature setting step value| 50| 1-50
   9.Power| Power output percentage| AUTO| None (520) I AUTO/20-100% (S60)
   Idle| 1.SleepTime| Sleep time| 30s| 5-360s
   2.SleepTemp| Sleep temperature| 50°C| 50°C-500°C
   3.IdleTime| Standby time| 360s| 30-990s
   4.Sensitive| Wake up sensitivity| 5| 1-30
   5.ScreenOpen| Standby screen display| ON| OFF/ON
   Lcd| 1.Brightess| Display brightness| 50| 5-255
   2.Direction| Display direction| 0°| 0°/180°
   3.KeyAction| Key operation mode| A-B+| A-B+/A+B-
   Volt| 1.LowVolt| Low voltage protection| OFF| OFF/5.0-9.0V (S20) I OFF/5.0-12.0V (S60)
   2.PowerVolt| Supply voltage compensation| OV| -5.00-5.00V
   Cali b| /| Temperature calibration| /| T1-T4
   About|  /| Information about soldering iron|  /|
3. Menu operation guide

• Main interface:
  ① Long press A key, switch between “Stop” and “Work” modes.
  ② Short press A or B key, adjust the working temperature setting value.
  ③ Long press B key, enter the level 1 menu.
  ④ A warning icon is displayed,after the warning condition is eliminated, short press A or B key to change the warning icon to Stop.

• Level 1 menu :
  ① Short press A or B key,loop select level 1 menu function box.
  ② Long press A or B key, enter the level 2 menu.

• Level 2 menu :
  ① Short press A or B key,loop select level 2 menu function box.
  ② Long press A or B key,enter level 2 menu setting item,the parameter setting box appears.Short press A or B key,setting this parameter.After the parameter setting is complete, long press AB key or no key operation for 5s, the parameter setting box will exit automatically, save the parameter setting,return to level 2 menu.
  ③ Long press AB key or no key operation for 5s, return to level 1 menu.
  ③ Long press AB key or no key operation for 5s, return to the main interface

  4. Calib temperature calibrate
     Calib| Fix| Fixed Value
     ---|---|---
     Real| Real Value
     T1| Thermometer Temperature
     Next| Next
     Save|  Save

Temperature calibration is divided into four parameters: T1, T2, T3 and T4,after entering the calibration interface,T1 temperature parameter is selected by default xx ,long press A or B key,T1 temperature parameter changes to the setting box xx ,waiting for the “Real” value to stabilize in the “Fix” value range,the thermometer measures the actual temperature of the iron tip,short press A or B key to write the thermometer data to T1, after the T1 calibration temperature is complete,long press AB key to exit the setting box,short press B key to enter “Next” and T2 successively, continue to complete T2, T3, T4 temperature calibration.Finally enter to “Save”,long press and A or B key until “Save Succeed” appears,calibration complete.
During the calibration process,long press and hold AB key to exit the calibration interface, the parameters will not be saved. During the temperature calibration process, first add tin to clean the soldering iron tip, then use a thermometer to measure the temperature,during the calibration, the soldering iron tip is in a high temperature state to avoid burns.

Eliminate The Warning

When the soldering iron occurs a warning , a warning icon is displayed on the screen (if the buzzer is open, will accompany the warning beep), according to the prompt warning icon, troubleshot step by step, after eliminating the warning condition(if the buzzer is open, immediately stop warning prompt), short press A or B key the warning icon (main interface 1) changes to Stop.

Sleep Wake Up

• Work mode,when the soldering iron is in a static state without any operation, will enter sleep mode automatically after waiting for SleepTime seconds ,the temperature will be automatically set to SleepTemp.
• Sleep mode, when key operation or shaking the soldering iron,wake up the  soldering iron and automatically restore the original setting of WorkTemp ; ifthe soldering iron is not woken up, after waiting for IdleTime the soldering iron stops working, enter the Stop mode.
• Stop mode, the soldering iron is in a static state without any operation,after waiting for 180s to enter ScreenOpen, can exit by key operation or shaking the soldering iron.

Component Structure

Installation Steps

(1) Install the soldering iron tip: insert the soldering iron tip into
the host machine, as shown in the figure| (2) Remove the soldering iron tip: remove the soldering iron tip from
the host machine, as shown in the figure.

Note: When disassembling and assembling the soldering tip, pay attention to high temperature scald.

Firmware Update

Visit www.sequremall.com to obtain firmware and upgrade steps.

Customize The Startup LOGO

First，press and hold the B key, and then connect with the computer through Type-C,enter the LOGO interface,at this point the computer will appear a disk named LOGO .Copy the image named LOGO.bmp to the disk, disconnect the connection.
Note: The picture is a unit color. bmp format, pixel is 128*32, horizontal is 128, vertical is 32, named LOGO.bmp

Guarantee Clause

1. Performance failure caused by non-human factors occurs within 3 months from the date of purchase,the manufacturer provides free repair service.After 3 months, no labor fee will be charged for the repair,if the parts are replaced, the cost shall be borne by the user.
2.  All artificial damage, self-disassembly,failure caused by improper use, and consumable soldering iron tip, is not covered by this warranty.

Safety Precautions

• Use power supplies and accessories that meet safety standards,use original SEQURE accessories.
• Must make sure that the power is off, can replace the soldering iron tip, to avoid damaging the product,beware of high temperature burns.
• Soldering iron tip burn easily,power off after rest or completion,store in place not easily accessible to children.

www.sequremall.com
info@sequremall.comhttps://sequremall.com/

References

• Best DIY Soldering Hobby Tools & Accessories One Stop Shop – SEQURE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>