EATON B127U002PHPH2 2 Port HDMI over Cat6 Extender Kit Owner’s Manual

EATON B127U002PHPH2 2 Port HDMI over Cat6 Extender Kit

HDMI extender kit with pigtail splitter and receivers extends a 4K signal via Cat6 cable to 2 HDMI monitors up to 230 ft. away.

Highlights

Supports UHD resolutions up to 4K @ 60 Hz (4:4:4) for crystal-clear video Lightweight splitter and receivers are USB-powered through display or power adapter Can be daisy-chained up to 4 times for each display (920 ft. per chain) via additional receivers Plug and-play operation with no software required for easy, immediate installation Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

System Requirements

• Source device with HDMI output (Blu-ray player, PC, media server)
• Display device(s) with HDMI input (HDTV, projector, monitor)

Package Includes

• Pigtail transmitter/splitter

• (2) Pigtail receivers

• Owner’s manual

Features

HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and dual-receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127U-002-PHPH2 extends 4K signals from an HDMI source to two HDMI monitors up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. The one-foot pigtail design of the transmitter/splitter and receivers makes the units easy to install, especially in tight spaces.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127U-002-PHPH2 supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with uncompressed DTS-HD, Dolby True HD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.

Create Daisy-Chain Installations with HDMI Outputs, DisplayPort Outputs or Both
The B127U-002-PHPH2 includes two receivers but is also compatible with HDMI (B127U-110-PH) and DisplayPort (B127U-110-PD) receivers (sold separately) in a four-link daisy-chain installation. The dual out put transmitter allows you to create two separate daisy-chains with a total of eight receivers. Each additional receiver adds up to 230 feet (70.1 meters) to the maximum video transmission distance and up to a total of 920 feet (280 meters) for the entire installation. Note: See the installation diagram in the owner’s manual for more information.

Multi-Resolution Support Allows Mixing and Matching of Displays of Different Resolutions
Say you have a brand new 4K/60 Hz HDTV in the living room but want to also connect your Blu-ray player or media server to the older 1080p TV in the kitchen and the 4K/30 Hz monitor in your home office. The B127U-002-PHPH2 is backward compatible with 4K/30 Hz and 1080p resolutions via automatic switching, allowing each connected television to display video at its maximum resolution without affecting the other outputs.

Plug-and-Play Operation for Quick Setup and Use
The included transmitter and receiver units work right out of the box with no software required. All feature
a one-foot USB-A pigtail connector as the primary power source. Plug the USB connector on the transmitter into a USB-A power adapter (such as U280-W01-QC3-1, sold separately), and plug the receivers into the displays’ USB-A ports. User-supplied 24 AWG Cat6 cabling connects the transmitter and receivers. Note: The transmitter and receivers can also be powered through their Micro-USB ports.

TAA-Compliant for GSA Schedule Purchases
The B127U-002-PHPH2 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Specifications

OVERVIEW

UPC Code| 037332281258
Product Type| HDMI Over Cat6 Splitter/Extender Kit
Technology| Cat6; HDMI; USB
Host Connector| HDMI (MALE)
VIDEO
Video Input| HDMI (MALE)
Video Output| HDMI (MALE)
Number of Monitors Supported| 2
Video Ports| (2) HDMI (MALE)
Video Ports Details| HDCP 1.4; HDCP 2.2
Resolutions Supported| Up to 4K (3840 x 2160) @ 60 Hz
Supported Resolutions| 1280×720 (720p); 1920×1080 (1080p); 1920×1200; 2560×1600; 3840×2160 (4K)
Max Supported Video Resolution| 3840 x 2160 (4K x 2K) @ 60 Hz
Max. Distance (Between any 2 Units)| 230 ft.
Max. Distance (Between any 2 Units) (Meters)| 70
Max 1080P Range (ft)| 230
Max 1280 x 720 (720p) Range (ft)| 230
Max 1920 x 1080 (1080p) Range (ft)| 230
Max 1920 x 1200 Range (ft)| 230
Max 2560 x 1600 Range (ft)| 230
Max 3840 x 2160 (4K@30Hz) Range (ft)| 230
Max 3840 x 2160 (4K@60Hz) Range (ft)| 230
Transmitter Video Input| HDMI
Transmitter – Number of Video Outputs| 2
Receiver/Transceiver Video Output| HDMI
Receiver – Number of Video Outputs| 2
Signal Range (ft)| 230
Signal Range (m)| 70
Range Extension with Booster| No
Recommended Cabling|  N202-Series Cat6 Gigabit Snaggles UTP Ethernet Cabling
Other Tripp Lite product used to extend range| N/A
Max Supported Color Depth| 36-bit Deep Color
HDR Support| Yes
3D Video Supported| Yes
Chroma Sub Sampling| 4:2:0; 4:4:0; 4:4:4
Maximum Signal Range (ft)| 230
Maximum Signal Range (m)| 70
EDID Support| Yes
Signal Transmission| Unidirectional
DisplayPort Alt Mode| No
DSC Support| No
AUDIO
Audio Input| HDMI
Audio Output| HDMI
Audio Specification| Passthrough audio formats including LPCM 2.0/5.1/7.1
INPUT
Bus Powered| Yes
Power Source| USB
POWER
Power Source Type| USB
Power Source| Transmitter and Receiver (Included)
Power Over Cable (PoC) Support| No
Receiver Power Source| USB
USER INTERFACE, ALERTS & CONTROLS
LED Indicators| Transmitter: x1 Green (Power); Receiver: x1 Green (Power), x1 Orange (Data)
PHYSICAL
Color| Black
Material of Construction| Plastic
Cable Jacket Color| Black
Cable Jacket Material| PVC
Cable Outer Diameter (OD)| 7.3mm
Wire Gauge (AWG)| 28
Cable Length (ft.)| 1
Cable Length (m)| 0.30
Cable Length (in.)| 12
Included Mounting Accessories| N/A
Cable Length (cm)| 30.5
Total Number of Ports| 9
Number of Displays| 2
Form Factor/Mounting Options| Pigtail
Rack mountable| No
Receiver Unit Dimensions (hwd / cm.)| 1.86 x 4.7 x 7.5
Receiver Unit Dimensions (hwd / in.)| 0.73 x 1.85 x 2.95
Receiver Unit Weight (kg)| 0.25
Receiver Unit Weight (lbs.)| 0.55
Shipping Dimensions (hwd / in.)| 2.17 x 10.24 x 6.46
Shipping Dimensions (hwd / cm)| 5.51 x 26.01 x 16.41
Shipping Weight (lbs.)| 1.41
Shipping Weight (kg)| 0.64
Transmitter Unit Dimensions (hwd / cm.)| 1.86 x 4.7 x 7.5
Transmitter Unit Dimensions (hwd / in.)| 0.73 x 1.85 x 2.95
Transmitter Unit Weight (kg)| 0.25
Transmitter Unit Weight (lbs.)| 0.55
Unit Dimensions (hwd / in.)| 0.730 x 1.850 x 2.950
Unit Packaging Type| Box
Unit Weight (lbs.)| 1.41
Unit Weight (kg)| 0.64
ENVIRONMENTAL
Operating Temperature Range| 32° to 104°F (0° to 40°C)
Storage Temperature Range| 5° to 122°F (-15° to 50°C)
Relative Humidity| 0 to 85% RH
COMMUNICATIONS
Max 1024 x 768 Range (ft)| 230
Signal Range (ft.)| 230
Signal Range (m)| 70
Max 480P Range (ft)| 230
Transmission Distance| 230 ft. (70 m)
Max 1440 x 900 Range (ft)| 230
Max 1080i Range (ft| 230
Max 1920 x 1440 Range (ft)| 230
Max 4K UHD Range (ft)| 230
Max 480i Range (ft)| 230
Max 640 x 480 Range (ft)| 230
Max 800 x 600 Range (ft)| 230
Max 1600 x 1200 Range (ft)| 230
EDID Compatible| Yes
IR Remote Extension Support| No
RS-232 Serial Extension Support| No
Consumer Electronics Control (CEC) Supported| No
Latency| Zero Latency
CONNECTIONS
Number of Ports| 9
Ports| 6
Ports Detail| Video is carried from the transmitter to the receiver via the RJ45 output ports on each unit Extend the maximum distance of the installation by daisy chaining B127U-110-PH units via the second RJ45 port on the receiver units
Daisy-Chain Port| RJ45 (Female)
Side A – Connector 1| HDMI (MALE
Side A – Connector 2| USB A (MALE)
Side A – Connector 3| (2) RJ45 (FEMALE)
Side A – Connector 4| MICRO-USB B (FEMALE)
Side B – Connector 1| (2) HDMI (MALE)
Side B – Connector 2| (2) USB A (MALE)
Side B – Connector 3| (2) MICRO-USB B (FEMALE)
Side B – Connector 4| (4) RJ45 (FEMALE)
Daisy-chainable / Cascadable| Yes
Daisy-chainable / Cascadable Details| Up to 4 Units
PORT EXPANSION
Daisy-chainable or Cascadable| Y
FEATURES & SPECIFICATIONS
All-in-One Kit| Yes
10/100 Ethernet Extension Support| No
Integrated/Removable Cable| No
MST Support| No
Mounting Accessory Included| No
Multi-Resolution Support| Yes
Built-In Equalizer| No
HDCP Specification| 1.4; 2.2
Driver Required| No
Recommended Category Cable| 24 AWG Solid Wire Cat6
DIN Mountable| No
STANDARDS & COMPLIANCE
Product Certifications| ICES (Canada); NOM (Mexico)
Product Compliance| CE (Europe); FCC Part 15 Class B (USA); REACH; RoHS3; Trade Agreements Act (TAA); UKCA; WEEE
WARRANTY & SUPPORT
Product Warranty Period (Worldwide)| 1-year limited warranty

© 2023 Eaton. All Rights Reserved.
Eaton is a registered trademark. All other trademarks
are the property of their respective owners.

References

• Cat6 Gigabit Solid Conductor Ethernet Cable, Blue, 125-ft | Eaton

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>