BLACK+DECKER ICR16X Cord Reel Iron Instruction Manual

BLACK+DECKER ICR16X Cord Reel Iron

XPRESS STEAMTM CORD REEL IRON

Product may vary slightly from what is illustrated.

1. Spray nozzle
2. Water-fill cover
3. Fabric select dial
4. Spray button
5. Steam button
6. Automatic shutoff light
7. Comfort GripTM handle
8. Cord reel button
9. Slip-resistant heel
10. Fabric guide
11. Water tank
12. AUTO CLEANTM button
13. Soleplate

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safety precautions should always be followed, including the following:

• READ ALL INSTRUCTIONS BEFORE USING.
• Use iron only for its intended use.
• To protect against a risk of electric shock, do not immerse the iron in water or other liquids.
• The iron should always be turned to the minimum (min) setting before plugging or unplugging from outlet. Never yank cord to disconnect from the outlet; instead grasp plug and pull to disconnect.
• Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.
• Always disconnect iron from electrical outlet when filling with water or emptying, and when not in use.
• Do not operate iron with a damaged cord, or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron; take it to a qualified service person for examination and repair, or call the appropriate toll-free number on the cover of this manual. Incorrect reassembly can cause a risk of electric shock when the iron is used.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. Please call the appropriate toll-free number listed in the warranty section of these instructions.
• Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.
• Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down or use the surge of steam—there may be hot water in the reservoir. Avoid rapid movement of iron to minimize hot water spillage.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The iron must be used and rested on a stable surface.
  • When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
  • Do not use iron if it has been dropped, if there is visible signs of damage or if it is leaking.

SPECIAL INSTRUCTIONS

• To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.
• If an extension cord is absolutely necessary, a cord rate at 15-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

Note: If the power cord is damaged, please call our Customer Service line listed in these instructions.

HOW TO USE

This product is for household use only.

GETTING STARTED

• Remove any labels, stickers or tags attached to the body or soleplate of the iron.
• Please go to www.prodprotect.com/blackanddecker to register your warranty.

Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.

Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.

Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing.

FILLING WATER TANK

1. Open the water-fill cover.
2. Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank. Do not overfill.
3. Close the water-fill cover.

Note: If you need to add water while ironing, unplug the iron and follow above steps.

SPECIAL FEATURES

3-WAY AUTOMATIC SHUTOFF

The automatic shutoff feature in your iron works as follows:

• Once the iron reaches appropriate temperature, it will turn off after 30 seconds of inactivity if left on its soleplate or tipped over on its side. If left vertically on its heel rest, it will shut off after 8 minutes (A).
• The power indicator light starts blinking to let you know that the iron has stopped heating.
• As soon as you pick up the iron, it will start heating again. Wait for iron to reheat completely before resuming operation.

Anti-Drip System

The anti-drip system prevents water spotting at low temperatures.

IRONING WITH STEAM

Smart SteamTM Technology The Smart SteamTM system automatically generates the right amount of steam for the fabric type selected. Once you select the temperature, the Smart SteamTM technology detects the temperature and adjusts the steam power accordingly.

Surge of Steam

Use to remove stubborn wrinkles.

1. With the water tank filled to the MAX mark, set fabric select dial to appropriate setting (between 4 and 6) for your fabric.
2. Be sure there is water in the tank. Steam is automatically turned off between settings 0 and 3.
3. Press the steam button to generate a surge of steam. For best performance, leave an interval of 5 seconds between bursts.
4. When finished ironing, turn the fabric select dial to 0 and unplug the iron.

Important: Always stand the iron on its heel rest when powered on but not in use.

Vertical Steam

Use for removing wrinkles from hanging clothes and drapes.

1. Be sure the water tank is filled to the MAX mark.
2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed once they are hung.)
3. Turn the fabric select dial to appropriate setting (between 4 and 6) for your fabric.
4. Hold the iron close to (but not touching) the fabric.
5. Pull the fabric tight in your free hand and pump the steam button as you move the iron over the fabric.

Important: Always stand the iron on its heel rest when powered on, but not in use.

USING SPRAY

Use to dampen tough wrinkles at any setting.

1. Be sure the iron is filled with water.
2. On first use, pump the spray button several times.

IRONING WITHOUT STEAM

1. Turn the fabric select dial to setting between settings 0 and 3 to iron without steam. The Smart SteamTM system will automatically turn off.
2. To dry iron at higher settings, empty the water from the tank to prevent steaming.

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified service personnel.

CLEANING OUTSIDE SURFACES

1. Make sure iron is unplugged and has cooled completely.
2. Wipe soleplate and outer surfaces with a soft cloth dampened with water.
3. Add mild household detergent. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch or discolor the iron.
4. After cleaning, steam iron over an old cloth to remove any residue from the steam vents.

AUTO CLEANTM SYSTEM

To keep steam vents free of any buildup, about once a month follow these instructions.

1. Fill water tank well below the MAX line. Plug in the iron.
2. Turn fabric select dial to 6 and stand the iron on its heel rest. Allow it to heat
3. Turn fabric select dial to 0, unplug the iron and hold over a sink with soleplate facing down.
4. Press and hold the AUTO CLEANTM button. Be careful, as after several seconds, hot water and steam will come out of the steam vents. Continue to hold the AUTO CLEANTM button until all the water has emptied. If necessary, rock iron side to side and front to back.
5. When finished, release the button, stand the iron on its heel rest and plug it in.
6. Heat the unit for about 2 minutes to dry out any remaining water.

STORING YOUR IRON

1. Unplug iron and allow it to cool.
2. Check that fabric select dial is set to 0.
3. Press and hold the cord reel button to retract the cord.
4. Store vertically on its heel to prevent water leaking from the soleplate.

NEED HELP?

For service, repair or any questions regarding your appliance, call the appropriate 800 number in this manual. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a service center. You may also want to consult the website listed in this manual.

Two-Year Limited Warranty

(Applies only in the United States and Canada)

What does it cover?

• Any defect in material or workmanship provided; however, Spectrum Brands, Inc.’s liability will not exceed the purchase price of product.

For how long?

• Two years from the date of original purchase with proof of such purchase.

What will we do to help you?

• Provide you with a reasonably similar replacement product that is either new or factory refurbished.

How do you get service?

• Save your receipt as proof of date of sale.
• Visit the online service website at www.prodprotect.com/blackanddecker, or call toll-free 1-800-465-6070, for general warranty service.
• If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.) How does state law relate to this warranty?
• This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.

Customer Care Line: 1-800-465-6070

For online customer service: www.prodprotect.com/blackanddecker

BLACK+DECKER and the BLACK+DECKER logos and product names are trademarks of The Black & Decker Corporation, used under license. All rights reserved. All other marks are Trademarks of Spectrum Brands, Inc.

© 2019 The Black & Decker Corporation and Spectrum Brands, Inc., Middleton, WI 53562

FREQUENTLY ASKED QUESTIONS

How does the TrueGlide Soleplate in the BLACK+DECKER ICR16X Cord Reel Iron contribute to smoother ironing?

The TrueGlide Soleplate on the BLACK+DECKER ICR16X provides a 2x smoother glide on all fabric types, ensuring efficient and effective ironing.

What is the significance of the Cord Reel feature in the BLACK+DECKER ICR16X Cord Reel Iron?

The Cord Reel feature in the BLACK+DECKER ICR16X allows the spring-loaded cord to unreel and retract quickly, offering convenient use and easy storage.

How does the Fabric Guide printed on the top of the BLACK+DECKER ICR16X Cord Reel Iron enhance its usability?

The Fabric Guide on the BLACK+DECKER ICR16X helps users find the perfect temperature for all fabric types, ensuring optimal ironing results.

What is the purpose of the Anti-Drip feature in the BLACK+DECKER ICR16X Cord Reel Iron?

The Anti-Drip feature in the BLACK+DECKER ICR16X eliminates pesky water spotting by properly heating water before it enters the steam chamber, ensuring a clean ironing experience.

How does the lightweight design of the BLACK+DECKER ICR16X Cord Reel Iron contribute to user convenience?

The BLACK+DECKER ICR16X is lightweight, weighing only 16 ounces, making it easy to handle and maneuver during ironing for added user convenience.

Can the BLACK+DECKER ICR16X Cord Reel Iron be used with different frequencies, and what is its frequency compatibility?

The BLACK+DECKER ICR16X Cord Reel Iron has a frequency compatibility of 50 Hz, making it suitable for use in areas with this frequency.

What are the product dimensions of the BLACK+DECKER ICR16X Cord Reel Iron, and how does its size impact its usability?

The product dimensions of the BLACK+DECKER ICR16X are 11.8 L x 5.5 W Inches, providing a compact and versatile size for effective ironing and easy storage.

How does the Auto Shutoff feature in the BLACK+DECKER ICR16X enhance safety during use?

The Auto Shutoff feature in the BLACK+DECKER ICR16X ensures safety by automatically shutting off the iron after a period of inactivity, preventing accidents and conserving energy.

What is the base material of the BLACK+DECKER ICR16X Cord Reel Iron, and how does it contribute to its performance?

The base material of the BLACK+DECKER ICR16X is TrueGlide, contributing to the nonstick properties of the soleplate for smooth gliding on fabrics.

How does the spring-loaded cord reel of the BLACK+DECKER ICR16X Cord Reel Iron facilitate easy use and storage?

The spring-loaded cord reel quickly unreels and retracts, making it convenient for users to use the iron and store it easily after ironing sessions.

What is the weight of the BLACK+DECKER ICR16X Cord Reel Iron, and how does it impact its maneuverability?

The BLACK+DECKER ICR16X weighs 16 ounces, providing a lightweight design that enhances maneuverability during ironing tasks.

Can the BLACK+DECKER ICR16X Cord Reel Iron effectively handle wrinkles on all fabric types?

Yes, the BLACK+DECKER ICR16X Cord Reel Iron is designed to handle wrinkles on all fabric types, thanks to its TrueGlide Soleplate and Fabric Guide.

How does the nonstick soleplate of the BLACK+DECKER ICR16X contribute to the durability of the iron?

The nonstick soleplate, known as TrueGlide, not only provides smooth gliding but also contributes to the durability of the BLACK+DECKER ICR16X Cord Reel Iron.

What is the Manufacturer and Model of the BLACK+DECKER Cord Reel Iron with the mentioned features?

The BLACK+DECKER ICR16X Cord Reel Iron is manufactured by BLACK+DECKER and has the model number ICR16X.

How does the BLACK+DECKER ICR16X Cord Reel Iron compare to traditional irons in terms of cord management and storage?

The Cord Reel feature of the BLACK+DECKER ICR16X allows for quick and easy cord management, making storage more convenient compared to traditional irons.

DOWNLOAD THE PDF LINK:BLACK+DECKER ICR16X Cord Reel Iron Instruction Manual

REFERENCE:BLACK+DECKER ICR16X Cord Reel Iron Instruction Manual- Device.Report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>