OBSERVER OBS-HL350 LED Rechargeable Headlamp User Manual

OBSERVER OBS-HL350 LED Rechargeable Headlamp User Manual

HEADLAMP

Luminosity (Lumen)

| 450 (High)

200 (Medium)

60 (Low)

Beam Distance| 500 ft
Rechargeable Battery Type| 1 x Lithium Ion, 3.7V, 1400mAH

Runtime

| 450 Lumens: 3.5H

200 Lumens: 6H

60 Lumens: 20H

Charge Time| 2.5H
Max Charging Input| 5V
Weight| 4.1 oz
Length x Width x Height| 3.4 in x 2.0 in x 1.7 in
Storage Temperature| +14°F to +122°F
Operating Temperature| +14°F to +122°F
Variable Light Intensity| 13-100%: 60 to 450 Lumens
Motion Sensor| Yes
IP-Rating (Dust & Water Resistance)| IP-67
ACCESSORIES| OBS-HL350
---|---
Charging Cable| USB Type-C
Hardhat Clips| 4 Clips

SAFETY INSTRUCTIONS

The owner and/or operator shall have an understanding of the product, its operating characteristics, and safety operating instructions before operating it. Safety information shall be understood:

1. Study, understand and follow all instructions before operating this
2. No alterations shall be made to this
3. It shall be the responsibility of the user to ensure that applicable personal protective equipment (PPE) complies with applicable local safety

OPERATION

IMPORTANT: Before using the headlamp for the first time, fully charge the battery.

Headlamp Use

1. Rotating Side Dial: Turn the dial clockwise to turn the headlamp on and counterclockwise to turn The dial varies the light intensity from 13% (60 Lumens) to 100% (450 Lumens).
2. Top Button (labeled M ): Press the top button once to turn the headlamp to 100% intensity, a 2nd time to turn to 50% intensity and a 3rd time to turn the headlamp
3. The headlamp can be rotated 45o or less (downward) to direct the light where it’s

Motion Senso r

1. The headlamp can also operate hands-free by using the motion sensor Turn this feature on and off by pressing the top button labeled . A blue LED light will turn on when the motion sensor is active.
2. When the motion sensor is active, wave your hand within 12 inches of the front of the headlamp 2 times to turn the headlamp on and and 2 times to turn the headlamp

Charging the Headlamp

1. Low Battery Indicator: The headlamp main LED will flash when the battery is low (<15% power). The headlamp will flash 5x when it’s first turned on and below 15% power and then, if left on, 2x every 5 minutes until the battery
2. Plug the USB Type-C connector into the headlamp and the USB connector into a power The headlamp’s USB Type-C port is located on the bottom of the headlamp and has a protective rubber cover labeled . Ensure that the cover is secured after charging to maintain the IP67 water and dust proof rating.
3. A solid red LED light indicates that headlamp is A solid green LED light indicates that headlamp is fully charged.
4. At a minimum, charge every 3-6 months to keep the battery working normally and to avoid

Headlamp Band and Clips

1. The headband interior has silicone strip to keep the headlamp secure to your head or The headband can be adjusted to the needed size.
2. Four hardhat clips are included to fasten the headlamp to your hardhat even more Attached as many clips as needed to the headband and then hook the clips onto your hardhat.

GENERAL WARNINGS

The light from this headlamp is very powerful and should not be shone directly into anyone’s eyes, as this may cause short term blindness. If the beam does shine in your eyes, close them and look away immediately. Avoid putting the headlamp into water or other liquids.
This device utilizes rechargeable Lithium ion battery that can rupture, ignite and cause series injury if misused. Observe the follow safety rules;
DO NOT place battery or device in high temperature; DO NOT tamper with battery wiring; DO NOT puncture or damage battery; DO NOT use battery that appears damaged; DO NOT immerse in or expose battery to water; DO NOT alter or modify the battery; DO NOT dispose of the battery in fire or water. Failure to heed these warning can result in personal injury and/or property damage. Keep out of the reach of children. Replace the battery with the same lithium-ion battery.

This product has been designed and manufactured using high quality, recyclable and reuseable materials and components. The crossed wheeled bin symbol applied to the product indicates that it complies with European Directive 2012/19/UE. Please inquire about the collection of electrical and electronic products in your area.
Please comply with the local regulations. Do not dispose of this product with your normal household waste.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>