U-Rail SwitchBot Curtain Smart Electric Motor User Manual

U-Rail SwitchBot Curtain Smart Electric Motor

Want to see how it’s done?
Go to support.switch-bot.com for installation videos and additional tips.

In the Box

*One Hook is attached to the Main Body upon delivery.

Device Instruction

Preparation

• A smartphone or tablet with Bluetooth 4.2 or above
• Download the Switch Bot app
• Create a Switch Bot account and sign in
• Charge Curtain for about 4 hours
• (Optional) If you intend to use the Cloud Service feature,you need to set a Switch Bot Hub Mini (sold separately) up and connect your phone to the internet

Installation

Step 1: Add Curtain in the app
Create a SwitchBot account and sign in from the app’s Profile page. Then add Curtain to your account. Learn more at, support.switch-bot.com/hc/en- us/articles/360052119093

Step 2: Install on Your Curtain Track

Find out the best matching Hook Wheel
The Hook Pair has been attached with a set of Hook Wheels upon delivery. In the box, there are also several sets of Hook Wheels that are with different sizes and are exchangeable. Please follow the steps below to find the best matching set of Hook Wheels.

1. Insert the separate Hook into the curtain rail and rotate it by 90°.
   • If the Hook cannot fit in or you cannot rotate the Hook inside the rail, you need to replace with a smaller set of Hook Wheels.
   • If the Hook fits inside the rail, try pull it towards one side and tilt it. If the Hook slips out easily, you need to replace with a bigger set of Hook Wheels.
   • If the Hook fits inside the rail perfectly, there is no need to replace the Hook Wheels.
2. Replace the Hook Wheels.
   • a. Detach the existing Hook Wheel from a Hook.
   • b. Grab a Hook Wheel with the desired size. Adjust the white wheels until you can see the metal bar. Insert the metal bar into the tip of the Hook. You should hear a “click” sound once it is firmly attached.

  * c. Replace the Hook Wheel for the other Hook by repeating the previous steps.

Install Curtain to the curtain rail

Method 1 Installation for Common Models

• a. Close your curtain and then detach the end curtain hook from the rail.

• b. Insert the separate Hook into the curtain rail and rotate it by go0 Pull the Hook towards one side of the rail and tilt it back and forth to double check it fits inside the rail perfectly. If you have tried all the Hook Wheels provides and none of them works as expected, please contact our customer support at support@wondertechlabs.com.

• c. Insert both of the Curtain’s Main Body (with one Hook attached) and the separate Hook into the curtain rail simultaneously, rotate them by 90, and instantly attach the separate Hook back to the Main Body. The Switch Bot LOGO should face your room.

• d. Put the curtain back in place so the Curtain is hidden.

Congratulations! You have completed the installation. Resume to the app to calibrate Curtain.

Method 2 Installation for Specific Models

If you have troubles with Method 1 or you know the model of the curtain rail in your home, please visit the following link on a web browser to find which set of Hook Wheels to use and how to install,
https://support.switch-bot.com/hc/en-us/articles/1500012094841
For example, if your curtain rail model matches any of the following types, scan the QR code below for detailed information.

Install with the Clip (Optional)

If you use double side curtain, you need two Switch Bot Curtains to open it from the middle. Alternatively, you can use the auxiliary Clip we provide to turn it into a single side curtain so that you only need one SwitchBot Curtain. To do that, fully close the curtain so the 2 panels are closest to each other. Connect the upper parts of the two panels by using the Clip. Draw the curtain back and forth to make sure the two panels move as one. Then you can refer to Step 2: Install on Your Curtain Track on how to set the Curtain up.

Step 3: Calibration
Calibration is for your Curtain to adapt to your existing curtain track. You need to calibrate before you can control it from your phone or every time you change the Open Mode in the app. You can also redo the calibration on Curtain’s Settings page.

Control

Lots of convenient ways to control, at your will.

App Control
Open and close the curtain at your fingertip. We offer intuitive App control for iOS and Android, with weekly/bi-weekly updates following feedback from you. OTA firmware update is also available for better user experience.

Touch &Go
Even with Switch Bot Curtain, you’d probably still instinctively draw the curtains by hand sometimes. When it senses you drawing the curtain, the Switch Bot Curtain will kick in and do the work for you. We call this Touch & Go.

**Voice Control and Home Automation***

Smart living is powered by your voice commands. Wouldn’t it be great to just say it?

• “Alexa, close the curtain.”
• “OK Google, close my bedroom curtain.”
• “Hey Siri, open the living room curtain.”
• Require SwitchBot Hub Mini (sold separately).

Control with Switch Bot Remote (Sold Separately)
A wireless remote add-on for you to place anywhere.

Touch &Go
Even with Switch Bot Curtain, you’d probably still instinctively draw the curtains by hand sometimes. When it senses you drawing the curtain by more than 5 cm*, the SwitchBot Curtain will kick in and do the work for you.
For double side curtain, drawing on one side of curtain will trigger both Curtains to open or close simultaneously.
“Touch & Go” is turned on by default. To turn off, go to
“Advanced Settings”, and turn off “Touch & Go”.

• 5 cm is the best threshold we tested because it lowers the possibility of false trigger by your cats and dogs.

Voice Control and Home Automation
You can link multiple third-party services to your SwitchBot account and control Curtain or scenes using voice commands. You must meet the following requirements in order to achieve voice control and automation,

• Connect your phone or tablet to the internet
• Set a Switch Bot Hub Mini up (sold separately)
• Enable Cloud Service in Curtain’s Settings page
• Link third-party services to your SwitchBot account

SwitchBot Scene
You can set up Switch Bot Scene for home automation within the Switch Bot eco- system when you turn on the Cloud Service within the Settings. There are unlimited possibilities.

Control with SwitchBot Remote (Sold Separately)
You can control Curtain using a SwitchBot Remote. There are two buttons on Remote and you can set an action for each of them from the app. Please refer to Re mote’s user manual for more information.

Settings

Navigate to Curtain’s detail page and settings page for a variety of features such as Light Sensing (Beta), Delay, Schedule, Motion Mode, and more.

Light Sensing (Beta)
The light sensing feature allows you to set automations based on the ii luminance level or the relative intensity of sunlight. It’s still in the beta stage and is being upgraded continuously, so please explore the details in the latest app release.

Delay
You can set up 1 Delay for countdown action. You can set the countdown time, percentage of opening or closing, and Motion Mode.

Schedule
You can set up 5 Schedules on board, or unlimited Schedules with a Hub. You can set the day, time, percentage of opening or closing, and Motion Mode.

Motion Mode
Performance Mode gives Curtain more power* to move, which results in higher noise level. This mode is good for daily uses.
Silent Mode gives Curtain less power to move, which results in lower noise level. The best use case for this mode would be when you wake up with sunshine.

• Moves up to 8 kg/ 17 pounds of curtain (test results from controlled experiments in our lab)

Charging, Firmware and Factory Reset

Charging
It takes about 1 O hours’ to fully charge the battery and the battery lasts 8 months after a full charge’. You may also purchase our Solar Panel to charge by sunlight’.

1. 5 V 1A adapter is required to charge with adapter.
2. Battery life is tested under condition of runway of 3 meters, loaded with 8 kg of curtain, opened and closed twice a day, 25°C. Battery life may vary given different condition.
3. IIluminance Level 6 is required to charge with Solar Panel.

Firmware
Please make sure you have the up to date firmware by upgrading in time.

Factory Reset
Long press the button for 15 seconds until the LED light lights up. Then release the button. If you are using double side curtain, you will need to redo the calibration on both Curtains.

Caution:
You may lose all the settings after Factory Reset and you may need to add the device again and re-calibrate.

Specification

• Model Number: W0701600

• Color: White / Black

• Material: ABS plastic with UV-Resistant coating

• Product Size (Main Body): 42mm x 51 mm x 110mm Product Net Weight (Main Body): 135g

• Power: Battery-powered, Type-C, DC SV= 1A. Battery lasts up to 8 months’ after a full charge or unlimited with Solar Panel’

• Connectivity: Bluetooth 5.0 Long Range

• Sensor: Accelerometer, light sensor

• Strength: Up to 8 kg/ 17 pounds of curtain
  (test results from controlled experiments in our lab}

• Max Runway: 3 meters

• Mode: Silent Mode/ Performance Mode

• Timer: Up to 5. Or unlimited with a Hub’

• Voice Control (Hub Required): Amazon Alexa, Google Assistant, Siri Shortcuts, SmartThings, IFTTT, and LINE Clova

1. Battery life is tested under condition of runway of 3 meters, loaded with 8 kg of curtain, opened and closed twice day, 25°C.
   Battery life may vary given different condition.

2. Solar Panel is sold separately.

3. Hub is sold separately.
   Note: Use under regular temperature only.

Return and Refund Policy

This product has one-year warranty (start from the purchasing day). The situations below do not fit the Return and Refund Policy,

• Intended damage or abuse.
• Inappropriate storage (drop down or soaking in water).
• User modify or repair.
• Using loss.
• Force majeure damage (Natural disasters).

The batteries are not in the warranty.

Contact and Support

• Setup and Troubleshooting: support.switch-bot.com
• Support Email: support@wondertechlabs.com
• Feedback: If you have any concern or problem when using our products, please kindly send feedback from the Profile> Feedback page in the Switch Bot app.

CE Warning

• Manufacturer’s Name: Won Technology (Shenzhen) Co., Ltd.
• Sample Description: SwitchBot Curtain
• Trade Mark: SwitchBot
• Model number: W0701600
• Operating Temperature: -20°C~60°C

This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the device, including the antenna. Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

1. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
2. The device complies with RF specifications when the device used at 20cm from your body.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comp ly with the lim its for a Class B digital device, pursuant to part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
• Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>