DIY Tools 1057B Multifunctional Rechargeable Torch High Lumens User Manual
- June 16, 2024
- DIY Tools
Table of Contents
User Manual
1057B Multifunctional Rechargeable Torch High Lumens
Product Parameters
Item NO| 1057B
Material| Aluminum alloy, ABS
Light Bulb| 30W LED, COB
Net Weight| 0.73 LB/0.33 KG
Size| 7.11.81.4 inch/184.73.5 cm
Box Size| 8.53.72.2 inch/21.59.45.6 cm
Battery| Built-in 2000 mAh battery
Charging Method| Type-C USB charging
Charging Time| 3-4 hours
Discharge Time| 2-20 hours
Gears| Main light 4: strong light/medium light/weak light/strobe
Tail light 6: warm yellow light strong light/warm yellow light weak
light/white light strong light/white light weak light/red light/red light
strobe
Package Include| Flashlight x 1
USB Cable x 1
Lanyard x 1
Manual x 1
Instructions:
Main Light:
The big switch controls the light modes of the main light. There are four
gears to choose from: strong light, medium light, weak light, and strobe. The
higher the bright flashlight of the light, the more heated it becomes. It is
recommended that low light mode can extend the battery life and service life
of the battery. The main led flashlight provides up to 2.5 hours of strong
light, 5 hours of medium light, and 8 hours of low light. Note: Long press the
big button to turn off the flashlight directly.
Tail Light:
The tail of the flashlight is equipped with a hidden screw-out camping
lantern. According to the direction of the tail arrow of the flashlight,
rotate the hidden camping light to reveal it. The small switch controls the
light modes of the camping lantern. There are six gears to choose from: warm
yellow light strong light, warm yellow light weak light, white light strong
light, white light weak light, red light, and red light strobe. The COB tail
light boasts an impressive 10 hours of strong light and 20 hours of low light.
Note: Long press the small button to switch to red light mode.
Charging:
- When using the flashlight for the first time, it is recommended to charge it first as the battery may be insufficient. To charge the flashlight, use the provided Type-C USB cable and connect it to a power source. The charging time is 3-4 hours.
- There is a indicator at the main light switch. When all color indicator lights, the flashlight is full charged. As the battery is consumed, the blue, green, and yellow indicator lights will go out one by one. When only the red indicator light is on, it means that the battery is low and needs to be charged in time. Otherwise, over-discharging of the battery may occur, which may lead to failure to charge.
- Comes with a type-c charge cable. If you need to use a charger, choose a 5V 1A charger to charge the flashlight. Do not overvoltage or overcurrent charge. During charging, the red, yellow, green, and blue indicator lights will light up in turn. When the blue indicator light is on, it means that the battery is fully charged. Please unplug the power in time.
Note:
- The flashlight will generate heat during use, which is normal. If the product gets too hot during use in hot weather, you can switch to a lower gear or turn off the power and wait for the product to cool down before continuing to use it.
- When not using the flashlight for a long time, please store it fully charged in a cool and dry place. It is recommended to recharge it every three months. Do not expose the flashlight to sunlight, water, chemicals, or corrosive gases for a long time to prevent damage.
- Non-professionals should not disassemble the flashlight to avoid damaging the circuit board.
- Do not shine the light directly into your eyes to avoid eye injury.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>