iTable 406 Smart Sofa Control Panel with Bluetooth User Manual
- June 3, 2024
- iTable
Table of Contents
- iTable 406 Smart Sofa Control Panel with Bluetooth
- Notice
- Panel Overview
- Buttons and Functions
- Instructions
- Instructions
- Product parameters
- Product model and functions
- Common troubleshooting
- Quality Assurance
- FCC Radiation Exposure Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
iTable 406 Smart Sofa Control Panel with Bluetooth
Notice
- Thank you for purchasing this product.
- Please take time to read and understand the instruction manual carefully. Please keep the manual in good condition for future reference.
- This product is suitable for AC 100V-240V voltage environment.
- Do not leave the unit unattended when the power is on. When the product is in standby, mode, remove the device socket and disconnect the power supply.
- Do not operate this unit if the power supply or the
- If your iTable406 is damaged or immersed in water, disconnect the power supply immediately and contact customer service.
- Power cables are kept away from heat stuff. If power cables are damaged, do not use them.
- Do not let anything put or insert into anything into the exposed opening of this product.
- This product should be used indoors. Please avoid sun exposure, moisture and extreme temperature.
- Do not attempt to replace parts on this product. Opening or removing any part may result in electric shock or injury.
- If you have any medical conditions, or pacemaker, or are vulnerable to electronic interference, please consult with your doctor before using the table.
- If you lack relevant experience or understanding of this product, please use this product under supervision and guidance.
- Children should use this product under adult supervision.
- If the power cables are damaged, they must be replaced by the manufacturer or experienced Service technician. Tampering with the product cause harm and void any Warranty.plug is damaged.
- Please refer to the Troubleshooting section this manual for solutions to common issues. Contact customer service immediately for repair. Do not disassemble or attempt to repair anything not listed in the troubleshooting section.
Panel Overview
Buttons and Functions
Instructions
- Touch and hold to open the headrest.
- Touch and hold to close the headrest.
- Touch and hold to open the waist.
- default and automatically turns off after 4 hours.
- Touch to turn on/off the LED light function. The system works for 4 hours by
- Plug the product into an available household electrical outlet. Aim your phone’s wireless charging receiver at iTable406 and lay it flat on top. If the device does not respond, move the mobile phone until the receiver is aligned.
- Push the slider in the middle direction to directly use the power socket (CN, US, UKCA, CE, AU optional), USB-A charging, and USB-C charging.
- Long press to power on the audio and seat control system. The sound touch interface lights up blue, the seat touch interface lights up white. Bluetooth goes into automatic search mode.
- Bluetooth goes into standby mode when the sound and seat control systems are turned on. Open your Bluetooth device and search for the Bluetooth name“iTable406” and click connection is successful,the stereo plays a “beep”.If you want to disconnect the current Bluetooth connection, press and hold for about 3S, and the Bluetooth will be restored to the state to be connected. Insert the USB storage ( the USB port next to the headphone hole) with music files, and the product will automatically enter the USB playback mode. Disconnect the USB connection and the device automatically switches to Bluetooth mode. (supported file formats.
- If the USB connection is not disconnected, press to switch playback mode. to Bluetooth playback mode.
- Insert the earphone into the port,and the device automatically switches to the earphone output. Disconnect the headphone connection and automatically switch to the speaker output.
Instructions
- Touch e the volume, Tap and hold to quickly reduce the volume.
- Touch to pause or play music.
- Touch back to the previous song.
- Touch to go to the next song.
- Touch to open the seat.
- Touch to close the seat.
- Touch to reset the seat.
- Aim your phone’s wireless charging receiver at iTable406 and lay it flat on top. when the charging is successful, the blue light near the wireless charging area changes color to green.
- If the device is faulty, such as water or a short circuit, the system automatically cuts off the power supply, and the safety button near the USB-C port automatically opens. If
the fault is rectified, press the safety button to reset the device. If the fault is not removed, the safety button can’t be pressed and the device can’t be used.
Product parameters
Product model and functions
Common troubleshooting
If you have tried everything and still can’t solve the problem, contact customer service. Do not attempt to disassemble and repair by yourself.
Quality Assurance
- The terms of service will not affect your legal rights and interests in any way.
- The warranty period of this product is 24 months. (The date of delivery will begin this shall period.)
- You can confirm the date of manufacture according to the barcode on the product.
- If the barcode is damaged or lost so that the date of manufacture cannot be traced back, it will be deemed to be beyond the valid warranty period.
- During the warranty period, if any quality problem occurs during normal use, free repair or replacement of your iTable406 or accessories will be provided.
- Product quality problems caused by improper storage and maintenance of the product, unauthorized disassembly, expansion and modification of products are not within
the scope of Quality Assurance.
The warranty does not apply if
- Damage caused by improper use.
- Damage caused by improper transportation and connection.
- Damage caused by operation, modification and negligence not mentioned in the instructions for use.
- Damage caused by faulty or mismatched external equipment. damage caused by force majeure (such as fire, flood, earthquake, lightning, war, riot, etc.).
- Damage caused by repair or disassembly by other non-professionals.
- For repair, please contact the customer service from which you purchased the product.
Note
Proper use and proper storage of the product can effectively extend the
service life of the product.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 18 and Part 15 of the FCC Rules. Operation is
subject to the following two conditions This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Refer to CC Part 18.213(c) and KDB 784748 Anner A section A.5:
- Max. Electric Field Emissions: 4.12V/m Max. Magnetic Field Emissions: 0.75V/m
- The maintenance of the system is the responsibility of the manufacturer.
- To prevent interference, the product should be as far away from devices operating at the same frequency as possible.
- Manufacturers of RF lighting devices must provide an advisory statement, either on the product packaging or with other user documentation, similar to the following: This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. Variations of this language are permitted provided all the points of the statement are addressed and may be presented in any legible font or text style.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>