EBL EB-260581512BR LCD Universal Battery Charger and Discharger User Manual

Table of Contents

Thanks for purchasing the EBL product For safety purpose, please read this manual carefully before using it.

Thanks for purchasing the EBL® product For safety purpose, please read this manual carefully before using it.

General Information Detailed instruction is provided in this manual (the charger function, safety usage and notice.)

EBL-906 can charge 1/2/3/4 pieces AA/AAA/C/D Ni-MH Ni-CD batteries and 1/2 pieces 9V Ni-MH Ni-CD batteries.
The LCD will display the charging progress of AA,AAA, C,D batteries and the LED for 9V battery.
Controlled by MCU technology, using -AV intellectual cut-off charging method, automatically turn to trickle charge mode, prevent from over-voltage, over-current and reverse connection. Constant current charging mode would protect the battery against current fluctuation and keep using the charger safety.
Micro computer controlled IC, automatically recognize the defective battery, short circuit battery and non-rechargeable battery. On these occasion, the charger doesn’t charge the batteries for safety.
The charger has short circuit protection function.
AA,AAA,C,D slot has the discharge function also, discharge the battery before charging may remove the memory effect of the batteries.
If the voltage of the battery’s voltage under 0-0.9V, the charger will renovate it automatically.

Input: 100-240V AC 50/60Hz 0.5A MAX
Output: DC 1.2V 1000mA AA, AAA, C, D1: 1000mA AA, AAA, C, D2/3/4: 2000mA DC 9V: 60mA
Discharge Current: 300mA-800mA
No Load Power Consumption: 0.5W Max
Charging Rate ≥ 80%
Using Temperature: 0-35°C; Humidity: ≤ 80%
Storage Temperature: 0-25°C; Humidity: ≤ 60%
Working Temperature:
- Surface temperature of charger : ≤ 60°C
- Surface temperature of battery : ≤ 45°C

Safety Specification
Meet the safety standard of CE

User Construction
Make sure the batteries are placed correctly, make the “+/-” pole of the batteries are corresponding to the “+/- “of the charger. Start to charge when put the batteries into charger: the LCD display will be bright about 0.5 seconds for self-inspection, then turn off and standby for charging. (If the LCD keep flashing means the battery is non-rechargeable, not compatible or defective, please stop to charge at once.)
Charging AA/AAA/C/D Ni-MH Ni-CD rechargeable batteries: One LCD corresponding to one slot, when the LCD indicator shows means the batteries have been fully charged. And the charger is individual, could charge different type and capacity compatible batteries in the same time.
Charging 9V Ni-MH Ni-CD rechargeable batterie s: the LED will always keep lighting. Should to calculating its charging time, here is the formula: Capacity of 9V battery/30mA*1.2General charging time for 9V battery (for reference only): 150-300mAh about 6-14 hours
Discharge: Press the button to change mode, LCD screen will display “DISCHG” while discharging. Please note that the charger will automatically turn to charging mode “CHG” after the battery is discharged.
“ERROR”: If the battery is broken (0 Volt) and install battery incorrectly, the charger will shows “ERROR” to remind you personally.

Cautions

Please install the battery into charger as the image showing in case of reversing. Incorrectly installation will cause the LCD display shows “ERROR”
If the indicator light dose not turn on while charging, please checking firstly if the battery is normal and if the installation is correct.
New battery will reach the best performance after 2-3 times char- ge and discharge.
Charge the battery to fully if the battery is long time storage and usage firstly.
It is normal phenomenon that the battery is warmer than room temperature when charging. The temperature will automatically de- crease to normal after fully charged.
Cutting off the power supply when you no need to charge the battery and take out the battery after fully charged.
Children should not use this charger without adult’s supervision.

Warning

The charger can only charge for AA,AAA, C,D,9V Ni-MH Ni-CD rechargeable battery. It may cause explosion, battery broken, leakage, personal injure and damage to property if charging other type of battery.
It may cause electric shock hazard if using the charger incorrectly
This charger is using for indoor only, keep it away from moist and heat.
Please place it under the safety place where the children cannot to reach up to.
Do not dissemble or reassemble the charger for safety reason.

EBL-EB-260581512BR-LCD-Universal-Battery-Charger-and-Discharger-
IMAGE-3

Introduction

Hello, thanks for choosing our product Rechargeable Battery.
All EBL products come with 30 days money back and one year limited warranty, if you have any question about our products, please contact us with your order number. We will try our best to provide you the best service.

Caution

Please check if the battery is damaged, bulging, or leaking before using.
If so, please stop using. Please make sure that the polarities are inserted as required before using.
Do not mix EBL battery up with other brand’s batteries or different types of batteries such as alkaline and zinc batteries, do not mix with the new and old batteries to avoid over discharging. New battery can achieve the best performance only if it experience 3-5 times cycle of charge-discharge.
If the battery gets hot after using, it should be cooled before recharge.
Please remove the battery from the device if it not use in a long time.
Please charge and discharge the battery at least once every three months if it was been idle for a long time.