PHILIPS HY1200-07 Sonicare Rechargeable Toothbrush User Manual
- June 16, 2024
- Philips
Table of Contents
HY1200-07 Sonicare
Rechargeable Toothbrush
Frequently Asked Questions
Why is there a gap between my brush head and handle?
A small gap between the brush head and toothbrush handle is normal and necessary. The brush head must be able to move to create the right amount of vibrations.
How to charge your Philips One rechargeable toothbrush
1 Open the end cap at the bottom of the toothbrush handle (Fig. 4) and plug the USB-C charging cable into the USB-C charging port (Fig. 5). 2 Connect the USB cable into a 5V USB wall adapter (Type A). Note: Wall adapter not included. Only use 5V IPX-4 adapter (Type A). 3 Your Philips One beeps twice to indicate that the toothbrush is charging. 4 Your toothbrush continues to charge until it is fully charged. - When the toothbrush is charging, the battery indicator fades up and down in white. - When fully charged, the battery indicator lights up solid white and turns off after 30 seconds of being fully charged. Note: It can take up to 8 hours to fully charge the battery, but you can use the toothbrush before it is fully charged. When not charging your Philips One, be sure the end cap is securely closed.
Why is there no power adapter included with the product?
At Philips, we are committed to sustainability. In addition to prioritizing recycled materials in our packaging, we are removing the power adapter in several products to reduce electronic waste. If you do not have a splashproof USB adapter, you can request it online or calling us for additional support. After brushing with your Sonicare, follow these steps for longer life and performance Published on 18 May 2023 Cleaning your toothbrush and brush heads regularly improves their lifespan and performance. Clean your toothbrush after use by rinsing your brush head and bristles. Wipe the handle with a damp cloth. You can sanitize your toothbrush head daily using the Philips Sonicare UV Brush Head Sanitizer, which removes 99% of all bacteria from your brush heads. We recommend carrying out a detailed weekly cleaning session. Just follow the easy steps below:1. Remove the brush head. 2. Rinse the bottom of the brush head with warm water. 3. Rinse the metal shaft area with warm water. 4. Wipe the entire handle with a cloth and be sure to wipe around the top seal (around the metal shaft), the buttons on the handle, and the bottom of the toothbrush. 5. Wipe the entire surface of the handle with a wet cloth. Never use the dishwasher to clean your toothbrush or any of its accessories. Do not puncture the rubber seal around the metal shaft as this may cause water damage.