X-IMVNLEI x17 Drone with 1080P HD FPV Camera Instruction Manual

X-IMVNLEI x17 Drone with 1080P HD FPV Camera

• After sales team E-mail address: ximvnlei@gmail.com
• Please read the instructions carefully before using the product.

DISCLAIMER

Preface
Thank you for purchasing the X-IMVNLEl series drone. Please read this manual carefully before operating it, and please keep this manual properly for future adjustment and maintenance.

Important Statement

1. This product is not a toy, it integrates expertise in mechanics, electronics, aerodynamics, high-frequency launching, etc.
2. This drone integrates precise equipment, which requires proper assembly and commissioning to avoid accidents. The drone holder must operate the drone in a safe way, improper handling will cause serious personal injury or property damage. It may also be lost due to incorrect operation.
3. This product is suitable for people who have experience in operating drone and over 14 years old.
4. If there is a problem during use, operation or maintenance, please contact your local sales agent or retailer, or keep in touch with the person in charge of our company.
5. Please use only original parts and accessories.
6. Please keep the packaging and this user manual for future reference.

SAFETY PRECAUTIONS

This drone may be dangerous during use, please ensure that it is far away from any people or spectators when flying. Improper installation, poor use conditions, or unfamiliar operation of the user may cause damage to the aircraft or personal injury, and may also lead to accidents. Please pay special attention to flight safety and learn to identify more dangerous situations that may cause accidents due to your own negligence.

1. Stay away from obstacles and people.
   During flight, this drone may change slightly in speed or sensitivity, and may cause potential hazards. Therefore, please stay away from crowds, buildings, trees, buildings, high-voltage lines and other objects. At the same time, please avoid using it under severe weather conditions such as heavy rains, thunderstorms, and strong winds to ensure the safety of users, viewers and surrounding properties.

2. Keep away from humid environment.
   The interior of the drone is composed of many precision electronic and mechanical parts. Therefore, please try to avoid any moisture or water entering the fuselage, otherwise it may cause the mechanical and electronic parts to malfunction and cause an accident.

3. 0nly use the included parts for the intended purpose
   Please use original parts for modification or maintenance to ensure flight safety. Please operate and use within the range allowed by the product function. Use of unapproved parts will invalidate the warranty. Do not use the drone for any illegal purpose or beyond the scope prescribed by local laws and regulations.

4. Avoid independent operation.
   Beginner may have some difficulties in the early stages of learning to operate this drone. Please try to avoid operating the drone independently. If conditions permit, please operate under the guidance of more experienced users.

5. The owner of the drone should not operate under the influence of drugs or alcohol.
   Please operate this drone according to your own status and flying skills. Any fatigue, poor mental state or incorrect operation may increase the risk of accidents.

6. When drone flying at the highest speed, please keep a safe distance.
   When the drone is flying at the highest speed, please keep the drone away from the driver and any people or objects around it to avoid danger or damage.

7. Store in a cool and dry place.
   The drone is composed of materials such as metal, fiber, plastic, and electronics. Therefore, please stay away from heat sources and avoid prolonged exposure to direct sunlight. Excessive heat exposure can cause deformation and damage.

Note: According to Part 15 of the FCC Rules, this device has been tested and meets the limits of Class B digital devices. These limits are designed to provide reasonable protection against harmful interference from residential equipment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, you can confirm by turning the device on and off. It is recommended that users try to correct the interference by one or more of the following measures.

• Increase the distance between the equipment and the receiver.
• Please note that changes or modifications not expressly approved by the responsible party may invalidate the user’s operating authority
• Any questions we would like to hear from you! Please include your order number when you contact us at email (Customer service e-mail address: ximvnlei@gmail.com )

WARNING

1. This package and instruction manual contains important information, please keep it for future reference.
2. You are responsible for ensuring that this type of drone will not cause personal injury or property damage to others.
3. When debugging or assembling this drone, please strictly follow the instructions shown in the manual. During flight or landing, please pay special attention to the fact that the user must keep a distance of 1-2 meters from the drone to avoid possible injuries caused by the collision of the drone with the head or face or body.
4. The company and distributors are not responsible for physical loss, damage or injury caused by improper operation.
5. Children 14 years and older should use this product under the guidance of an adult. Children under 14 years of age are prohibited from using this product.
6. Please assemble and use this product correctly in accordance with the instructions or packaging instructions. Some parts must be assembled by adults
7. This product contains small parts. Please keep it out of the reach of children to avoid the risk of suffocation caused by accidentally swallowing parts.
8. It is strictly forbidden to play near roads or areas with heavy traffic to avoid accidents.
9. Please dispose of packaging materials in time to avoid harm to children.
10. Do not disassemble or reassemble the aircraft, otherwise it may cause malfunctions during flight
11. The battery in the charger battery box should be plugged into the designated power source with the same product identification.
12. The battery and charging cable are not toys.
13. When charging, please do it under the supervision of an adult. Please stay away from any combustibles when charging. Please keep the battery within your sight while charging.
14. Please do not short-circuit the battery or squeeze the battery to avoid explosion.
15. Do not mix lithium-ion batteries with other types of batteries.
16. Do not short-circuit the battery or disassemble the battery or throw the battery into the fire; do not place the battery in a high temperature or heated area (such as near a fire or near an electric heating device).
17. The drone should be as far away as possible from other electrical or electronic equipment, or away from nearby places with magnetic objects to prevent them from interfering with each other.
18. Please keep a safe distance from the high-speed rotating motor to avoid the injure of twisting, or cuts.
19. The engine will heat up. Do not touch it to avoid burns or injuries.
20. Please do not bring this product close to your ears, it may damage your hearing.
21. In order to comply with the command of the magnetic environment requirements formulated by the Aviation Radio Administration and related departments, please stop using drones when there are control orders during the control period in certain areas.
22. Keep your drone within sight.
23. Never fly the drone above the head of a crowd.
24. Never fly the drone in stadiums or during sporting events. 25. Understand airspace restrictions and requirements.

Warning: The aircraft battery must be charged under the supervision of an adult. Please unplug the power supply in time after fully charged. Do not overcharge the battery.

SAFETY PRECAUTIONS

1. The flying zone must be legally approved by your local government.
2. Keep your drone away from heat and prolonged exposure to direct sunlight to avoid damage.
3. Avoid moisture. Humidity and water can damage your drone, which in turn may cause accidents.
4. Please be sure that all the propellers are undamaged and are installed in the correct orientation..
5. Please operate your drone as your skill level allows. User fatigue, impairment and improper operation can cause accidents
6. Do not touch propellers, motors or other moving parts while your drone is on.
7. Please don’t use this product to follow any moving vehicles.
8. Please flight the drone back to you as soon as possible when the battery is running low.

Flight Environment

• Avoid flying over or near obstacles, crowds, high voltage power lines, trees, airport or bodies of water.
• DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the on board compass.
• DO NOT use the drone in adverse weather conditions such as rain, snow, fog and strong wind.
• Stay away from spinning propellers and motors

Safe flight is very important. Please read the safety 0 guidelines carefully before flying.

Aircraft Components

1. HD camera

2. Propeller

3. Motor

4. LED light

5. Smart lithium battery

6. Folding and unfolding the aircraft
   Before taking off, please make sure the motor arms are fully expanded.

7. Propeller installation and removal
   Please make sure all propellers are installed in the correct orientation according to the diagram. If installed incorrectly, the aircraft will not be able to fly normally.
   Warning: If propeller A is replaced, you need to replace the corresponding propeller A; if propeller B is replaced, you need to replace the corresponding propeller B.

8. Propeller protection frame installation

9. When installing the propeller protection frame, you need to pull out the blocking parts first, and then insert the protection frame.

10. Suggestion: Newbie please install the propeller protection frame, and you can remove it after you are familiar with the drone.

11. Lithium battery of the aircraft
    When in a low power state the aircraft will emit a “beep· sound, the aircraft body lights will start to flash. At that time, please immediately fly back the aircraft, and charge the battery to avoid unnecessary losses.

Lithium battery charging instruction

1. Balanced charging: insert the USB charging cable into the USB port of the computer, and connect the other end of the USB charging cable plug to the charging port of the lithium battery. When charging, the battery power indicator always list red light, when the battery is full, the indicator will turn off, charging is complete.
2. You can use mobile power or car power for charging.
3. The charging time of the aircraft battery is about 2 hours.

Warning :

1. Lithium batteries are rechargeable and recycled, with limited capacity location, batteries do not support modification.
2. Please charge under supervision. It is forbidden to charge in bed and on the sofa. Please unplug the power in time when the battery is fully charged.

Precautions when charging:

• Do not place the charged battery in a hot and heated place, such as an open flame or electric heating device, as damage or explosion may occur.
• Do not use the battery to hit or knock on hard surfaces.
• Do not disassemble the battery.
• Do not immerse the battery in water. Store the battery in a dry place.
• People should not leave while charging.

Charging the battery of the aircraft

• First, press down the two snaps of the battery, and then remove the battery.
• Cell phone adapter: 5V · 3A (not included)
• Charging time: about 2 hours (Charging time depends on charging power supply)

Remote Control Functions

1. Camera upward
2. Camera down
3. Throttle joystick
4. Short press one· key take off/landing
5. Long press enable/disable infrared obstacle avoidance
6. Short press speed switch
7. Long press headless mode
8. Photo/Video
9. Switch
10. Trim Forward
11. Trim backward
12. Direction joystick
13. Short press 3D flip
14. Long press turn on/off outdoor mode
15. Fine-tune left
16. Fine-tune right
17. Mobile phone holder

Remote Control Battery

• Use a screwdriver to unscrew the screws, then open the battery cover and install the batteries, the remote control uses 3 sections of l.5VAAA batteries, please pay attention to install the correct poles of the batteries.
• Warning: The batteries use 3 sections of AAA batteries, please take out the battery if unused in a long time. If the battery power is running out, please buy ordinary 1.5V AAA battery to replace it.

Basic Flight

Flight Preparation
Please be sure to read the manual in detail before you start to operate the drone.

Pre-flight check

1. Whether the batteries of the aircraft and remote control are fully charged.
2. Whether the battery is installed in place.
3. Whether the motor arms are fully expanded.
4. For novice flight, please install the protection frame, which can protect the propeller to reduce friction.
5. Whether the propellers are installed correctly, and no damage phenomenon.
6. Gently toggle the propellers by hand to see if it can be easily expanded.

Flight Environment Check

• Indoors Flight:
  Please choose to fly in an open space with no obstacles, people or pets nearby.

• Outdoors Flight:

  • Please choose to fly in clear or wind-free weather.
  • Please keep the drone in sight and away from obstacles, Fight voltage Imus, trees, and crowds.
  • Don’t fly in extreme conditions, such as excessive cold, heat, strong winds, and heavy rain.

Take-off Procedure

1. Step 1:Turn on the drone
   Switch on the drone and place it on a horizontal surface, at which point the drone lights flash.

2. Step 2: Turn on the remote control
   Press the power button of the remote control, when you hear and i ° sound from the remote control, the front and rear lights of the drone are always on, indicating that the frequency is successful.

3. Step3 : Push the throttle rocker and directional rocker outward at the same time, the drone will make a “di” sound and the drone indicator light will flash rapidly until the gyro calibration is complete the drone indicator light will stay on.

4. Step 4: One-key take off
   Short press the throttle rocker, and the drone will automati­cally fly to a height of 1.2 meters and then hover, at this time you can push the throttle and joystick to achieve the scent of the drone.

• One Key take-off /landing
  Short press the throttle rocker to start one-key takeoff, and the drone will automatically unlock the propellers and take off to a height of 1.2 meters and then hover, at this time we can control the drone through the throttle and joystick stick. Short press the throttle stick again to start a one-key landing, the drone will descend vertically at the current position until it lands on flat ground.

• Obstacle Avoidance Mode
  After long-pressing the throttle stick to start the obstacle av­oidance mode, if the direction stick is moved to any direction, the drone’s obstacle avoidance head will automatically sense whether there is an obstacle in that direction or not (it is recommended to operate on the indoor white wall). If there is, the drone will not fly in that direction. Long press the throttle rocker again to exit this function.

• Camera angle adjustment
  Through the camera adjustment button, you can remotely adjust the up or down angle of the aircraft camera.

• Speed Switching
  This drone has 3 speeds, the default is a low speed, short press the speed switch button to make a “didi” sound for medium speed and press again to make a “dididi” sound for high speed. It is recommended that beginners familiarize themselves with the various operations of the aircraft before switching to high-speed gear, the drone will be more wind resistant in high-speed gear.

Headless Mode
A As the operator’s operating direction is very important for the operation of the “headless mode”, please do not change the operator’s operating direction after entering the “headless mode”, as this may cause misdirection and lead to unnecessary losses and damage.

• Turn the nose of the drone toward the front, long press the speed switch button until the remote control will emit a short “beep” sound, and then the drone light will flash slowly, the drone enters the headless mode, if you long press the button again the drone will exit the headless mode.
• Normal mode: the front camera direction of the drone, that is the front.
  Headless mode: the drone ignores the direction, the flight direction will follow the remote control direction joystick no matter which direction the nose of the drone heads.

Photos/Video
Short press the button, and the mobile phone APP will make a clicking sound and the camera will take a picture and store it in the mobile phone album press and hold for 3 seconds to start recording, and press and hold again for 3 seconds to save the recording to the phone album, and stop recording.

3D Flip

• Short press the direction joystick vertically and then push the directional lever to flip in different directions.
• Warning: 3D flip consumes a lot of power and should be used sparingly, novice users are advised to use this function in open spaces.

Outdoor Mode

• When flying outdoors you can turn on outdoor mode by long pressing the direction joystick vertically. A long press again will turn off the outdoor mode. Turning it off makes the drone more stable when flying indoors.
• Tip: This drone is equipped with Optical flow positioning technology to give you more stability when flying indoors.

Fine-tuning

• If your drone is offset in one direction, fine-tune it by pressing the fine-tuning button in the opposite direction.
• When the drone forward drifts, then press the backward trim tab until it keeps the balance. When the drone backward drifts, then press the forward trim tab until it keeps the balance.
• When the drone leftward drifts, then press the right trim key until the drone fly balance, When the drone rightward drifts, then press the left trim key until the drone fly balance.

Maintenance and repair

1. Avoid exposing this product to sunlight or heat.
2. Do not immerse the product in water, as this may damage the electronic parts.
3. Check the plug and other accessories regularly and if you find any damage, stop using it immediately until it is completely repaired.

Maintenance procedure

After-sales information:

• Please read the manual carefully before using the product and keep this manual for future reference.
• This content is subject to change If you have any questions about this document, please contact X-IMVNLEI by sending a message to us .
• E-mail: ximvnlei@gmail.com (24hr/7d)
• IMVNLEl®I© ALL RIGHTS RESERVED

App Operating Guide

Please scan the corresponding QR code to download App.

Add a device

1. Turn on the product power switch
2. Enter the phone “settings” and open WIFI
3. Find the device’s WIFI hotspot “X-IDRONE17_****” from the WIFI list, click on the connection until the connection is successful
4. Open App, click the start icon to enter the real-time interface

Operating instructions

For icon meaning of each operating and player interface, pies see below.

Function introductions of APP control interface

• Control mode

  • Notice:
    After connecting to the aircraft, turn on the control in the control mode

• Rocker

Flight modes

1. Gravity Sensing

2. Gravity Sensing Mode: When the aircraft is successfully connected to the mobile APP, turn on the gravity sensing mode and tilt the phone to control the aircraft to fly forward, backward, left, and right.
   Notice:

3. This feature can only be done if you have enough airspace.

4. This function cannot be used when the drone is in a low battery state.

5. Headless Mode

6. Press the headless mode button as shown, and the remote control will emit a short 11 beep” sound. Then the drone light will flash slowly, the drone enters the headless mode, if you press the button again the drone will exit the headless mode.

7. Track Mode

8. Trajectory Mode: Draw a line on the screen, and the aircraft will fly according to the drawn trajectory.
   Notice:

9. This feature can only be done if you have enough airspace.

10. This function cannot be used when the drone is in a low battery state.

11. Gesture Photo/Video

12. Click the icon in the APP to take photos or videos by gestures. Scissors gesture to take photo, palm gesture video. After the shooting is finished, the photo or video will be saved to the album.

13. MV Function

Click MV button in the APP, you could have fun with your flight, such as split screen, center and tile the picture, rotate the screen, add music and filters.

After-sales information:

• Please read the manual carefully before using the product and keep this manual for future reference.
• This content is subject to change If you have any questions about this document, please contact X-IMVNLEI by sending a message to us .
• E-mail: ximvnlei@gmail.com (24hr/7d)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>