SANY SY485H Remote Control Excavator Instruction Manual

SY485H Remote Control Excavator

SY485H Remote Control Excavator
operation manual

To ensure that you can control the remote control excavator efficiently and conveniently, please read the manual thoroughly before use. Important information is contained in the product package and manual, please retain them. The product picture is only for reference, please refer to the real object.

Introduction of the remote control function

Installation instructions for remote control battery

1. Loosen the battery cover screws with a screwdriver, to remove the battery cover. 2. According to the correct polarity, install three 1.5V “AA” non-rechargeable batteries (batteries shall be purchased separately) into the battery box at the bottom of the remote control. Note: Battery shall be installed correctly according to its polarity.
3. Install the battery cover and tighten the screws.

Battery Installation of Remote Control Excavator

1. Turn the battery cover latch, and open the battery cover.
2. Connect the chargeable battery to the power port of the remote control excavator, and then put tt into the battery box
3, Install the battery cover, tum the battery cover laich to complete the installation,

Charging instructions for battery

Charging metiod
Connect the chargeable battery pack port to USB charging port as shown in the figure, and ensure the two ports are connected tightly and correctly, and then plug the USB charger into the power adapter to charge.
Status of USB indicator light during charging:

1. LED light goas out when charging:
2. LED lightis always on when connected:
3. LED light gaes out when changing:

Battery Precautions

1.  The remote control excavator uses 7.4V 500mAh rechargeable battery pack, And its remote control uses three 1.5V “AA” non-rechargeable batteries;
2. Correctly remove and install the battery according to the polarity and voltage marks on the toy battery box, and ensure the battery is not short-circuited:
3. Do not charge the non-rechargeable battery;
4. Charge the rechargeable battery in the custody of adults;
5. Remove the rechargeable battery from the toy before charging;
6. Do not mix different types of batteries or old and new batteries:
7. Only use the batteries with the recommended model or batteries which model is equivatent to the recommended model:
8. Remove the exhausted battery from toy, and remove the battery from toy if it is not used for a jong time;
9. Ensure the power terminais are not short-circuited;
10. Battery charging time is about 2-3 hours;
11. Only connect the batteries to the specified number of power supply.
    During the use of the USB charging cable, regularly check whether its wire, plug, shell and other paris are damaged; if damaged, immediately stop using until it is repaired.

Light and Sound Control

Press the sound switch to tum on the sound, and then press to tum off. (circulation)
Press the light switch to tum on the light, and then press to tum off. (circulation)

Operation and control of the boom and cab

Operation and control of the chassis driving

Accessories replacement (accessories shall be purchased separately)

1. Firstly loosen the bucket set screws (Figure 1), and then remove the bucket (Figure 2). 2. Install the accessories onto the rod, insert the bolt and then tighten the nut (installation method of the two accessories is the same). Operation and control of the demolition machine

Operation and control of the scrap handler

product quality certificate
Product Name: SANY Engineering Truck
Product Model: SY485H
Suitable Age: 8 years old and above
Material Composition: Plastic and electronic components
Standard: GB6675.1-2014 GB6675. 2-2014 GB6675.3-2014
GB6675.4-2014 GB19865-2005
Manufacturer: Hunan SANY Cultural Industry Co., Ltd.
Address: No. 219, R&D Building, Sany Industrial City, Changsha Eco-Tech Development Zone, Changsha City, China
Producer: Shantou Huina Toys Co., Ltd.
Address: No. 9, Xinxing Road-V, Xinning, Chenghai District, Shantou
Maintenance: The product contains electronic components, do not put it in water or use it in a damp environment, and wipe the surface with a dry cloth.
This Manual contains important information and must be retained!
Warning

• This product must be used in the direct custody of adults.
• This product contains small parts, please do not swallow to avoid choking. Danger: Not suitable for children under 3 years old.

Quality Changes the World

FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference ,and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

A-1,10)-2023/7/17

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>