Shenzhen Sany Pioneer Technology BBM22-A Baby Monitor User Manual
- June 5, 2024
- Shenzhen Sany Pioneer Technology
Table of Contents
BABY MONITOR
User Manual
This Instruction for use provides caution and warning along with device setup and use. Please read the entire manual to learn about the features of the device use.
Product Info
Components:
Monitor Device, Base Station (Screen), Charging Cable, Battery Battery Removal
Tool, User Manual
The monitor device will track your baby’s sleeping position in real time,
display your baby’s current sleeping position on the screen, and notify you
after the baby has been lying prone for 45 seconds. It monitors the ambient
temperature, as well as abdominal movement, and transmits data to the base
station every 5 seconds. The base station will notify based on the data
received. 
This range can be greatly reduced when going through walls or if blocked by
objects, particularly if they are metal, other electronics, or the human body.
So place the Base Station where it is has the best line of sight path to the
Monitor Device. Avoid positioning your body between your child and the Base
Station.
NOTE:
This product is only intended to assist you in tracking your baby’s sleeping
position and is not intended to replace you as a caregiver.
Who Should Use
- Children 0-4 years old after the umbilical cord falls off
- Babies who cannot roll over on their own
- Parents who need to temporarily leave the crib
- Do not use the device if it is in a cradle, external movement will affect the monitoring of the device
How To Use
Please set the time and value before use.
Clip the product onto snugly fitting sleepwear (diaper/pants/etc), right next
to the belly button. (Snug fit sleepwear is important to avoid false
alarms.)
-
Long press to turn on the monitor device and power on the base station. If the following information is displayed, the connection is successful.
-
If it shows that the connection failed, move the device close to the base station and restart the monitor device to reconnect.
Control Panel Description
Unit
|
Description
|
Purpose
---|---|---
| Rotary knob| Turn to adjust a selected option.
| Confirm| Confirm the option and jump to the next option.
| Home button| Press to return to the Home screen.
| Back| Return to the previous option.
Screen Icon Description
Press the home button on the home screen to access menu options.
Icon
|
Description
|
Purpose
---|---|---
| Ambient temperature| Adjust the range of ambient temperature notice
| Kicking the quilt notice| Ajust the threshold value of kick the quilt notice
| Respiratory rate| Adjust the range of respiratory rate notice
| History| Record the monitor values for 30 days
| Set up| Adjustable device settings
| Switch settings| Turn on/off the functions of each part
| Time setting| Set the time and date of the base station
| Restore Defaults| Return all settings to the defaults
About Settings
About sounds
On the home screen, adjust the rotary knob to adjust the sound volume.
Pause notification sounds
When there is any notification, you can pause the notification sound for 60
seconds by pressing the home button twice.
If the condition is not resolved within 60 seconds, the notification remains
in effect until the condition is resolved.
Switch settings
Rotate the knob to select the corresponding function switch, and press the
Confirm button to switch ON/OFF. For the temperature unit, press the Confirm
buttton to switch between °C/°F, the default unit is °C. Back to return to the
previous interface.
View history
Select history and press”Confirm” to enter the history view. Select the date
you want to view.
- You can use the knob to switch the months, press Confirm to select the month. And it will automatically jump to date selection.
- Rotate to the date you want to view, which indicates the selected date and the date with data. After confirming, select the item you want to view.
- Enter the digital chart of the day after confirming the button.
- Turn the knob to switch between morning and afternoon.
- Press the “confirm” button and the specific value will be displayed. At this time, the knob can slide to view the line chart. Back to return to step 4 for morning and afternoon switch.
Using Notice
- 1This product is only intended to monitor your baby’s sleep dynamics and is not intended to replace you as a caregiver.
- Before using the product, ensure that the product is in normal working condition and operating environment. If stable readings do not appear during testing, discontinue use immediately.
- When using the product, please keep away from devices that generate strong electric and magnetic fields. Use in an inappropriate environment can affect the working of the product.
- The product is splash-resistant. If it gets wet, dry it off immediately.
- Do not immerse the device or power cord in water.
- Regularly inspect power cords, and power supply for damage or signs of wear. Discontinue use and replace if damaged.
- Do not open or modify the device. There are no user serviceable parts inside.
- The product is a precision device. Please do not disassemble or repair the product at will to avoid damaging the product.
- A monitor device can only be connected to one base station at any time.
- Warning Strangulation Hazard: Children have been strangled in cords.
Keep this cord and the base station out of the reach of children (more than 3 feet (0.9m) away from the crib).
Troubleshooting
The following are possible problems. Please troubleshoot them according to the
following table. If there are other problems that cannot be solved, please do
not use this product.
Frequent blue light and low respiratory rate
| Possible Reason | Solution |
|---|---|
| The pajamas are too loose and the device doesn’t fit the abdomen completely |
Change into close-fitting pajamas and make sure the device can feel abdominal movement
Fails to connect to the base station often
| Possible Reason | Solution |
|---|---|
| The distance between the device and the base station is too far | Keep the |
device close to the base station to avoid objects blocking between them.
The monitor device is not powered on| Please turn on the device
The green light often comes on and there is no reading on the screen
| Possible Reason | Solution |
|---|---|
| Not wearing the device properly/the pyjamas are too loose | Re-wear the device |
| The battery is too low to connect | Replace with a new battery |
Always light up the red notice
| Possible Reason | Solution |
|---|
The threshold is too high or too low
| Make sure that the temperature and respiration rate are within the normal range
The monitor device cannot be turned on
| Possible Reason | Solution |
|---|---|
| No battery installed | Install a battery |
| The monitor device battery is too low | Please replace the battery of the |
device
The battery is not installed correctly
| Verify the front and back of the battery. Make sure that the battery compartment spring contacts the battery correctly
Product Specifications
| Parameter | Base Statio | Monitor Device |
|---|---|---|
| Weight | 135g | 17.5g (battery and clamp included) |
| Size | 3.73.152.2 inch | 1.581.60.8 inch |
Battery: CR2450
Battery life: 2-3 months
Storage: Store in a cool, dry place away from prolonged sunlight.
Remove the battery when it is not being used for a long time.
Disposal: The device and components should be disposed of or recycled in
accordance with local regulations.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.