Mefine B0CK8JRNVQ Heating Pad for Personal Use Instruction Manual
- June 15, 2024
- Mefine
Table of Contents
PLEASE READ THESE
INSTRUCTIONS BEFORE USE
INSTRUCTION MANUAL
HEATING PAD FOR
PERSONAL USE
B0CK8JRNVQ Heating Pad for Personal Use
QUESTIONS OR CONCERNS
PLEASE CONTACT
E-MAIL
asmefine@gmail.com
IMPORTANT SAFETY INSTRUCTIONS DO NOT DESTROY
DANGER! To avoid the risk of burns, electric shock, and fire, this product must be used in accordance with the following instructions.
| Do ot sit on the pad
---|---
| Do not use while sleeping
Never position a pad undemeath the body
| Do not bleach.
| Do not iron.
| Do ot fold the pad. Avoid sharp folds that may damage the product.
| Not suitable for children under 3 years of age.
| Do ot tumble dry.
| Do not dry clean.
| Set 90F(30°C) extra gentle washing program.
| Avoid hot surfaces.
| Dispose of packaging in an environmentally friendly manner.
IMPORTANT SAFETY INSTRUCTIONS
DANGER! Non-observance of the following notes may resultin personal injury or material damage (electric shock, skin burns, fire).
-
Read all the instructions.
-
Do not use it while sleeping.
-
Never leave this appliance unatiended, especially around children
-
Do not use the heating pad for infants.
-
Do not use the heating pad for animals.
-
This pad is not to be used on, or by, a disabled, sleeping, or unconscious person, or a person with poor blood circulation unless carefully attended
-
This heating pad must not be used by people who are not sensitive to heat, or by vulnerable people who may not react to overheating: e.g diabetics, persons with skin-related ilinesses, or persons with scarred skin in the area where the pad is to be applied, or after taking any pain-relieving medication or alcohol. Do not use it on areas where the skin has lost its sense!
-
Check on the skin under the pad frequently as burns may ocour regardiess of the control setting
-
Do not use in oxygen-enriched environments.
-
Do not use pins or other metallic means to fasten this pad in place.
-
Do not sit on the heating pad.
-
Position the pad on top, but not undemeath as the level of body heat may increase when heat is trapped
-
Never use the pad with liniments, ointments, or salves, especially those containing heat-producing ingredients which could cause skin burns.
-
Never pull this pad by the supply cord.
-
When using an extension cord with this pad, make sure you’ve checked the electrical specifications section to use them correctly.
Unplug when not in use. -
Do not use the cord as a handle.
-
Do not bend or pinch the cord, and do not use this pad if it has been dropped or damaged, or has malfunctioned, or if the power cord or plug is damaged. This pad has no user-serviceable pars.
-
Do not tamper with this pad in any way.
-
Loop the cord loosely when storing; tight wrapping may damage the cord and internal parts.
-
This product is intended solely for non-commercial, non-industrial, and personal use. Do not use this product outdoors or for any other purpose.
-
Save these instructions for later reference.
OPERATING INSTRUCTIONS
- Plug the unit into an electrical outlet.
- Press the ON/OFF button to turn the heating pad on.
- The heating pad will automatically heat up to 86°F/50°C when it is tumned on.
- For the American region, each time the temperature key “+” is pressed, the temperature rises 2°F; For the European region, each time the temperature key “+ is pressed, the temperature rises 1°C
- For the American region, each time the temperature key ” is pressed, the temperature decreases 2°F; For the European region, each time the temperature key “+” is pressed, the temperature decreases 1°C.
- Timing Setting: 1/2/4/6/8/10h. Default auto-off time: 2h.
- The screen displays both the temperature setting and timer setting.
- Press the ON/OFF button one more time to tum the heating pad off.
Note: If you don’t disconnect the power supply, the heating pad will automatically heat up to the temperature at the last shutdown when you press the ON/OFF button to tum it on again.
CARE AND MAINTENANCE
CAUTION: DO NOT DRY CLEAN! DO NOT BLEACH! DO NOT USE WRINGER! DO NOT IRON!
- Disconnect the power cord from the electrical outlet. Do not pull by the cord.
- When cleaning is required, disconnect the controller from the point where the heating pad is connected.
- Machine or hand wash the pad using a mild detergent, cool water, and a gentle/delicate cycle.
- Line dry, or lay the pad flat to dry. Do not tumble dry.
- Make sure the product is completely dry before the next use.
- To store the product, loosely roll the heating pad (avoiding folding) and then store it in a cool, dry, dark place after each use.
SPECIFICATIONS
| Name | Heating Pad |
|---|---|
| Size | 16.933in/4384cm |
| Model | FY-HW1836 |
| Wattage | 120 Watts |
| Material | Soft Crystal Flannel |
| Cord Length | 7ft/213cm |
| 6 Timing Setting | 1/2/4/6/8/10 Hours |
| Temperature Range | 86°F-158°F/30-70°C |
FREQUENTLY ASKED QUESTIONS
- What temperature does this product reach?
‘The maximum temperature does not exceed the temperature limit of 158°F(70°C). The temperature adjustment range is 86°F-158°F(30-70°C). You can choose the desired temperature depending on your personal preference.
“How long does it take to heat up to the default temperature setting?
The heating pad will automatically heat up to the default tempera- ture(86°F/50°C) within 1 minute after powering on.
*Do the heating pads have an auto-off feature?
Yes, the unit turns off automatically after 2 hours of continuous use unless you set another timer.
*Why is the heating pad not hot enough?
It could be because there is insufficient contact between the heating pad and your body. To ensure optimal heat transfer, please make sure to maximize the surface area of contact between your body and the heating pad. By increasing the contact area, you wil experience a more effective and comfortable heating experience.
WARRANTY
The manufacturer does not bear any responsibilities when personal injury or property loss is caused due to the following reasons:
- Damage to the product due to improper use or misuse of the product.
- Alteration, change, and maintenance of the product with other equipment without following the instructions provided by the manufacturer.
- After verification, if the defects are due to improper operation during the transportation of the product
- After verification, if the problem or dispute is caused by the quality specification or the performance of the parts and components that were produced by a different manufacturer.
- In case of operation, repair, or maintenance of the unit without following the manuals instructions or related regulations
- If the damage is caused by natural calamities, improper environmental use, or use of force.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>