NuTone FG7S Gas Furnace Owner’s Manual
- June 15, 2024
- NuTone
Table of Contents
- NuTone FG7S Gas Furnace
- Technical Specifications
- TECHNICAL SPECIFICATIONS
- WARRANTY
- FEATURES and BENEFITS
- GAS FURNACE COMPONENTS
- DIMENSIONS
- BLOWER PERFORMANCE – FG7SA
- BLOWER PERFORMANCE – FG7SA Continued
- MODEL IDENTIFICATION CODE
- SPECIFICATIONS
- ACCESSORIES
- ANADA ,0 #ONVERSION KIT (0 TO 4,500 FT.)| 904915
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NuTone FG7S Gas Furnace
Technical Specifications
- FG7S (A and K Series)
- Features: 100% fired and tested, High Efficiency Upflow/Horizontal and Downflow Gas Furnaces, Induced Draft – 80+ AFUE
- Input: 45,000 – 126,000 Btuh
- Primary heat exchanger: Tubular
- Blower delay at start-up: 30 seconds
- Post purge: 30 seconds
- Igniter: Hot surface
- Wire harness: Color coded
- Blowers: High static blowers
- Cooling cycle blower-off delay: 90 seconds
- Venting system: Flexible category I venting system
- Blower kits: High efficiency blower kits
Installation
- Choose a suitable location for the gas furnace.
- Ensure proper clearance around the unit for maintenance and airflow.
- Connect the gas supply line to the gas valve.
- Connect the electrical supply to the unit.
- Install the venting system according to the manufacturer’s instructions.
Operation
- Set the thermostat to the desired temperature.
- The unit will start the blower delay at start-up and ignite the gas for heating.
- The blower will circulate the heated air throughout the space.
- When the desired temperature is reached, the unit will shut off the gas and continue running the blower for the cooling cycle blower-off delay.
- If troubleshooting is needed, refer to the diagnostic lights on the integrated control board.
Maintenance
- Regularly clean or replace the air filters.
- Inspect and clean the blower assembly, burner assembly, and flame sensor.
- Check for any gas leaks or unusual noises.
- Keep the area around the unit free from obstructions.
Specifications
- Model Numbers: FG7SA, FG7SK
- AFUE: 80+
- Cabinet Width: Varies depending on model
- Cooling Airflow: Varies depending on model
- Input Heating Capacity: 45,000 – 126,000 But
TECHNICAL SPECIFICATIONS
High Efficiency Upflow/Horizontal and Downflow Gas Furnaces Induced Draft – 80+ AFUE Input 45,000 – 126,000 Btuh
The high efficiency gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. The rounded corner jacket provides a pleasing “appliance appearance.” Design certified by CSA for application in Canada and the United States.
WARRANTY
- 10-year all-parts warranty.
- 10 Year Quality Pledge to replace the unit if the heat exchanger fails within the first 10 years of operation, to the original owner.
- Consumer product registration required for 10 year All Parts Warranty and Quality Pledge within a limited period of time after the installation. See current warranty document or visit our consumer web site listed on the back of this document for warranty details.
- When registered, this product is upgraded to a limited lifetime heat exchanger warranty.
FEATURES and BENEFITS
- 100% fired and tested: All units and each component are tested on the manufacturing line.
- Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free.
- Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install
- Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger assures a long life.
- 30 second blower delay at start-up: Assures a warm duct temperature at furnace start-up. Adjustable blower off settings (60, 90, 120 and 180 seconds).
- 30 second post purge: Increases life of heat exchanger.
- Hot surface igniter: Innovative application of a silicon nitride igniter. Utilizes proven Smaltite® technology.
- Color coded wire harness: Designed to fit the components, all with quick-connect fittings for ease of service and replacement
- High static blowers: All models equipped with high static blowers.
- 90 second cooling cycle blower-off delay (TDR): increases cooling performance when matched with a NORDYNE coil.
- Flexible category | venting system: May be vented with dedicated venting system or common vented with other category one appliances.
- High efficiency blower kits: Maximize efficiencies. On select units, a SEER improvement of up to 1 point is realized.
- Multi-speed direct drive blower: Designed to give a wide range of cooling capacities. Switches on PCB, provide ultra easy motor speed selection.
- LP convertible: Simple burner orifice and regulator spring change for ease of convertibility.
- Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.
- Integrated control board: Incorporates connections for electronic air cleaner and humidifier.
- Two piece door design: Enhances furnace appearance and uses captured screws to prevent loosing door screws.
- Blower Compartment: Insulated for ultra quiet operation.
GAS FURNACE COMPONENTS
- Blower Assembly
- Blower Door Switch
- Burner Assembly
- Control Board
- Flame Sensor
- Gas Manifold
- Gas Valve
- Igniter
- Inducer
- Insulated Combustion Tube (Downflow Models)
- Low Voltage Transformer
- Main Air Limit Switch
- Pressure Switch
- Roll-Out Switch(s)
DIMENSIONS
FG7SA 80+ High Efficiency Upflow/Horizontal Series
FG7SK 80+ High Efficiency Downflow Series
BLOWER PERFORMANCE – FG7SA
**Model Number| Heating Input (Btuh)| ****Motor Speed|
External Static Pressure (Inches Water Column)
---|---|---|---
0.1| 0.2| 0.3| 0.4| 0.5| 0.6| 0.7| 0.8
CFM| Rise| CFM| Rise| CFM| Rise| CFM|
Rise| CFM| Rise| CFM| Rise| CFM| Rise|
CFM| Rise*
| | (IGH| 1260| 26| 1205| 28| 1145| 29| 1080| 31| 1025| 33| 960| 35| 890|
37| 825| 40
3!045( )-23! “OTTOM 2ETURN| **** 45,000| -ED-(IGH
-ED-,OW**
| 955
825
| 35
40
| 950
800
| 35
42
| 940
760
| 35
44
| 935
730
| 36
46
| 925
690
| 36
48
| 860
650
| 39
51
| 800
600
| 42| 725
530
| 46
56| 63
| | ,OW| 655| 51| 630| 53| 610| 55| 580| 57| 550| 61| 520| 64| 480| 69| 435|
77
| | (IGH*| 1350| 25| 1290| 26| 1225| 27| 1155| 29| 1100| 30| 1025| 33| 950|
35| 885| 38
3!045( )-23!
3IDE 2ETURN
| 45,000| -ED-(IGH
-ED-,OW**
| 1025
885
| 33
38
| 1015
855
| 33
39
| 1005
815
| 33
41
| 1000
780
| 33
43
| 990
740
| 34
45
| 920
695
| 36
48
| 855
640
| 39
52
| 775
565
| 43
59
| | ,OW| 700| 48| 675| 49| 655| 51| 620| 54| 590| 56| 555| 60| 515| 65| 465|
72
| | (IGH*| 1260| 32| 1205| 33| 1145| 35| 1080| 37| 1025| 39| 960| 42| 890| 45|
825| 48
3!054( )-23! “OTTOM 2ETURN| **** 54,000| -ED-(IGH
-ED-,OW**
| 955
825
| 42
48
| 950
800
| 42
50
| 940
760
| 43
53
| 935
730
| 43
55
| 925
690
| 43| 860
650
| 47| 800
600
| 50| 725
530
| 55
58| 62| 67| 75
| | ,OW| 655| 61| 630| 63| 610| 66| 580| 69| 550| 73| 520| 77| 480| 83| 435|
92
| | (IGH*| 1350| 30| 1290| 31| 1225| 33| 1155| 35| 1100| 36| 1025| 39| 950|
42| 885| 45
3!054( )-23!
3IDE 2ETURN
| **** 54,000| -ED-(IGH
-ED-,OW**
| 1025
885
| 39
45
| 1015
855
| 39
47
| 1005
815
| 40
49
| 1000
780
| 40
51
| 990
740
| 40
54
| 920
695
| 43| 855
640
| 47| 775
565
| 52
58| 63| 71
| | ,OW| 700| 57| 675| 59| 655| 61| 620| 65| 590| 68| 555| 72| 515| 78| 465|
86
| | (IGH*| 1685| 32| 1640| 33| 1605| 33| 1565| 34| 1515| 35| 1475| 36| 1415|
38| 1345| 40
3!072( )-24″ “OTTOM 2ETURN| **** 72,000| -ED-(IGH
-ED-,OW**
| 1330
1175
| 40
45
| 1295
1155
| 41
46
| 1275
1125
| 42
47
| 1245
1100
| 43
48
| 1215
1075
| 44
50
| 1185
1045
| 45
51
| 1135
1010
| 47
53
| 1070
955
| 50
56
| | ,OW| 930| 57| 895| 60| 885| 60| 850| 63| 825| 65| 800| 67| 770| 69| 740|
72
| | (IGH*| 1770| 30| 1720| 31| 1685| 32| 1645| 32| 1590| 34| 1550| 34| 1485|
36| 1415| 38
3!072( )-24″
3IDE 2ETURN
| **** 72,000| -ED-(IGH
-ED-,OW**
| 1400
1235
| 38
43
| 1360
1215
| 39
44
| 1340
1180
| 40
45
| 1310
1155
| 41
46
| 1275
1130
| 42
47
| 1245
1100
| 43
48
| 1190
1060
| 45
50
| 1125
1005
| 47
53
| | ,OW| 975| 55| 940| 57| 930| 57| 890| 60| 865| 62| 840| 63| 810| 66| 775|
69
| | (IGH*| 1610| 41| 1575| 42| 1530| 44| 1485| 45| 1440| 46| 1385| 48| 1340|
50| 1275| 52
3!090( )-24″ “OTTOM 2ETURN| **** 90,000| -ED-
(IGH**
-ED-,OW
| 1295
1155
| 51
58
| 1260
1130
| 53
59
| 1235
1100
| 54
61
| 1220
1070
| 55| 1175
1035
| 57| 1135
1015
| 59| 1095
965
| 61
69
| 1015
920
| 66
72
62| 64| 66
| | ,OW| 880| 76| 860| 78| 830| 80| 800| 83| 765| 87| 740| 90| 675| 99| 660|
101
| | (IGH*| 1690| 39| 1655| 40| 1610| 41| 1560| 43| 1510| 44| 1455| 46| 1405|
47| 1340| 50
3!090( )-24″
3IDE 2ETURN
| **** 90,000| -ED-
(IGH**
-ED-,OW
| 1360
1215
| 49
55
| 1325
1190
| 50
56
| 1300
1155
| 51
58
| 1280
1125
| 52
59
| 1235
1090
| 54| 1190
1065
| 56| 1150
1015
| 58| 1065
965
| 63
69
61| 63| 66
| | ,OW| 925| 72| 900| 74| 870| 77| 840| 79| 800| 83| 775| 86| 710| 94| 695|
96
| | (IGH*| 1950| 27| 1865| 29| 1790| 30| 1715| 31| 1630| 33| 1550| 34| 1475|
36| 1390| 38
3!072( )-35# “OTTOM 2ETURN| **** 72,000| -ED-(IGH
-ED-,OW**
| 1860
1300
| 29| 1780
1240
| 30| 1710
1200
| 31| 1635
1160
| 33| 1575
1120
| 34| 1500
1065
| 36
50
| 1415
995
| 38
54
| 1325
910
| 40
59
41| 43| 44| 46| 48
| | ,OW| 1165| 46| 1115| 48| 1060| 50| 1025| 52| 985| 54| 940| 57| 890| 60|
825| 65
| | (IGH*| 2030| 26| 1940| 27| 1860| 29| 1785| 30| 1695| 31| 1615| 33| 1535|
35| 1445| 37
3!072( )-35#
3IDE 2ETURN
| **** 72,000| -ED-(IGH
-ED-,OW**
| 1935
1350
| 28| 1850
1290
| 29| 1780
1250
| 30| 1700
1205
| 31| 1340
1165
| 40
46
| 1560
1110
| 34| 1470
1035
| 36
52
| 1380
945
| 39
56
40| 41| 43| 44| 48
| | ,OW| 1215| 44| 1160| 46| 1105| 48| 1065| 50| 1025| 52| 980| 54| 925| 58|
860| 62
BLOWER PERFORMANCE – FG7SA Continued
**Model Number| ****Heating Input (Btuh)| ****Motor Speed|
External Static Pressure (Inches Water Column)|
---|---|---|---|---
0.1| 0.2| 0.3| 0.4| 0.5| 0.6| 0.7|
0.8|
CFM| Rise| CFM| Rise| CFM| Rise| CFM|
Rise| CFM| Rise| CFM| Rise| CFM| Rise|
CFM| Rise|
** 3!072( )-35#
3IDE + “OTTOM OR 2 3IDES
| ****
72,000
| (IGH*
-ED-(IGH
-ED-,OW**
,OW
| 2050
1955
1365
1225
| 26
27
| 1960
1870
1300
1170
| 27
29
| 1880
1800
1260
1115
| 28
30
| 1800
1715
1220
1075
| 30
31
| 1710
1655
1175
1035
| 31
32
| 1630
1575
1120
985
| 33
34
| 1550
1485
1045
935
| 34| 1460
1390
955
865
| 37
38
56
62
|
36
51
57
|
39
44
| 41
46
| 42
48
| 44
50
| 45
52
| 48
54
|
| | (IGH*| 1940| 34| 1860| 36| 1790| 37| 1710| 39| 1625| 41| 1540| 43| 1450|
46| 1355| 49|
3!090( )-35# “OTTOM 2ETURN| ** 90,000| -ED-(IGH
-ED-,OW
| 1820
1290
| 37
52
| 1760
1245
| 38
54
| 1695
1200
| 39
56
| 1620
1155
| 41
58
| 1545
1110
| 43
60
| 1466
1060
| 45
63
| 1380
995
| 48| 1280
915
| 52|
67| 73|
| | ,OW| 1145| 58| 1110| 60| 1070| 62| 1035| 64| 1000| 67| 950| 70| 905| 74|
835| 80|
| | (IGH*| 2020| 33| 1935| 34| 1860| 36| 1780| 37| 1690| 39| 1600| 42| 1510|
44| 1410| 47|
3!090( )-35#
3IDE 2ETURN
| 90,000| -ED-(IGH**
-ED-,OW
| 1895
1345
| 35
50
| 1830
1295
| 36
51
| 1765
1250
| 38
53
| 1685
1200
| 40
56
| 1610
1155
| 41
58
| 1525
1100
| 44
61
| 1435
1035
| 46
64
| 1330
950
| 50|
70|
| | ,OW| 1190| 56| 1155| 58| 1115| 60| 1075| 62| 1040| 64| 980| 68| 940| 71|
870| 77|
3!090( )-35#
3IDE + “OTTOM OR 2 3IDES
| ****
90,000
| (IGH*
-ED-(IGH**
-ED-,OW
,OW
| 2040
1910
1355
1205
| 33| 1955
1850
1310
1165
| 34| 1880
1780
1260
1125
| 35
37
53
59
| 1795
1700
1215
1085
| 37
39
55
61
| 1705
1625
1165
1050
| 39
41
57
63
| 1620
1540
1115
1000
| 41
43
60
| 1525
1450
1050
950
| 44
46
63
| 1425
1345
960
875
| 47
50
|
35
49
55
| 36
51
57
|
69
76
|
67| 70|
| | (IGH*| 2205| 36| 2150| 37| 2095| 38| 2030| 39| 1970| 41| 1900| 42| 1830|
44| 1740| 46|
3!108( )-35# “OTTOM 2ETURN| ****
108,000
| -ED-(IGH**
-ED-,OW
| 2050
1700
| 39
47
| 1995
1680
| 40
48
| 1955
1645
| 41
49
| 1895
1610
| 42
50
| 1840
1565
| 43
51
| 1775
1525
| 45
52
| 1700
1460
| 47
55
| 1610
1375
| 50
58
|
| | ,OW| 1390| 58| 1370| 58| 1355| 59| 1320| 61| 1300| 62| 1270| 63| 1225| 65|
1175| 68|
| | (IGH*| 2295| 35| 2235| 36| 2180| 37| 2110| 38| 2050| 39| 1975| 41| 1900|
42| 1810| 44|
3!108( )-35#
3IDE 2ETURN
| ****
108,000
| -ED-(IGH**
-ED-,OW
| 2130
1770
| 38
45
| 2075
1750
| 39
46
| 2035
1710
| 39
47
| 1970
1675
| 41
48
| 1915
1630
| 42
49
| 1845
1585
| 43
50
| 1765
1520
| 45
53
| 1675
1430
| 48
56
|
| | ,OW| 1445| 55| 1425| 56| 1410| 57| 1375| 58| 1350| 59| 1320| 61| 1275| 63|
1225| 65|
| | (IGH*| 2315| 35| 2260| 35| 2200| 36| 2130| 38| 2070| 39| 1995| 40| 1925|
42| 1825| 44|
3!108( )-35#
3IDE + “OTTOM
| ****
108,000
| -ED-(IGH**
-ED-,OW
| 2155
1785
| 37
45
| 2095
1765
| 38
45
| 2055
1725
| 39
46
| 1990
1690
| 40
47
| 1930
1645
| 41
49
| 1865
1600
| 43
50
| 1785
1535
| 45
52
| 1690
1445
| 47
55
|
OR 2 3IDES| | ,OW| 1460| 55| 1440| 56| 1425| 56| 1385| 58| 1365| 59| 1335| 60|
1285| 62| 1235| 65|
| | (IGH*| 2255| 41| 2200| 42| 2125| 44| 2065| 45| 2010| 46| 1935| 48| 1855|
50| 1755| 53|
3!126( )-45$ “OTTOM ONLY OR 2 OPENINGS| ****
126,000
| -ED-(IGH**
-ED-,OW
| 2075
1720
| 45
54
| 2025
1695
| 46
55
| 1970
1655
| 47
56
| 1940
1630
| 48
57
| 1875
1580
| 50
59
| 1810
1520
| 52
61
| 1750
1455
| 53
64
| 1680
1390
| 56
67
|
71| 1310| 71| 1300| 72| 1260| 74| 1230| 76|
| | ,OW| 1360| 69| 1375| 68| 1365| 68| 1315|
| | (IGH*| 2230| 42| 2180| 43| 2105| 44| 2045| 46| 1990| 47| 1915| 49| 1835|
51| 1740| 54|
3!126( )-45$
3IDE 2ETURN
| ****
126,000
| -ED-(IGH**
-ED-,OW
| 2055
1705
| 45
55
| 2005
1680
| 47
56
| 1950
1640
| 48
57
| 1920
1615
| 49
58
| 1855
1565
| 50
60
| 1790
1505
| 52
62
| 1735
1440
| 54
65
| 1665
1375
| 56
68
|
| | ,OW| 1345| 69| 1360| 69| 1350| 69| 1300| 72| 1230| 76| 1290| 72| 1250| 75|
1220| 77|
Can be C or N
- Factory Set Cooling Speed
- Factory Set Heating Speed
NOTES
- Two openings are recommended for airflows above 1600 CFM if filter(s) is(are) adjacent to furnace.
- Temperature rises in the table are approximate. Actual temperature rises may vary.
- Temperature rises shaded in gray are for reference only. These conditions are not recommended.
BLOWER PERFORMANCE – FG7SA Continued
Model Number
| ****
Heating Input (Btuh)
| ****
Motor Speed
| External Static Pressure (Inches Water Column)|
---|---|---|---|---
0.1| 0.2| 0.3| 0.4| 0.5| 0.6| 0.7|
0.8|
CFM| Rise| CFM| Rise| CFM| Rise| CFM|
Rise| CFM| Rise| CFM| Rise| CFM| Rise|
CFM| Rise|
3+054( )-23!
| ****
54,000
| (IGH*
-ED-(IGH
-ED-,OW**
,OW
| 1375
1155
790
650
| 29
35
51
| 1340
1130
775
640
| 30
35
52
| 1300
1110
765
630
| 31
36
52
| 1270
1085
750
610
| 31
37
53
| 1225
1055
730
590
| 33
38
55
| 1175
1015
700
565
| 34
39
| 1115
975
665
530
| 36
41
| 1035
910
610
480
| 39
44
|
57
71
| 60
75
| 66
83
|
62| 63| 63| 66| 68|
3+072( )-24″
| ****
72,000
| (IGH*
-ED-(IGH
-ED-,OW**
,OW
| 1610
1295
1155
910
| 33
41
46
59
| 1590
1275
1135
885
| 34
42
47
60
| 1575
1260
1115
860
| 34
42
48
| 1560
1250
1095
835
| 34
43
49
| 1540
1220
1065
810
| 35
44
50
| 1495
1195
1040
785
| 36
45
51
| 1460
1170
1015
765
| 37
46
53
| 1415
1120
980
735
| 38
48
54
|
62| 64| 66| 68| 70| 73|
3+090( )-24″
| ****
90,000
| (IGH*
-ED-(IGH
-ED-,OW**
,OW
| 1675
1330
1180
940
| 40
50
56
| 1655
1315
1165
925
| 40
51
57
| 1640
1300
1150
900
| 41
51
58
| 1620
1280
1135
880
| 41
52
59
| 1590
1255
1115
850
| 42
53
60
| 1560
1230
1090
825
| 43
54
61
| 1520
1200
1060
795
| 44
56
63
| 1475
1150
1010
760
| 45
58
66
|
71| 72| 74| 76| 78| 81| 84| 88|
3+108( )-35#
| ****
108,000
| (IGH*
-ED-(IGH
-ED-,OW**
,OW
| 2395
2190
1785
1145
| 33
37
45
| 2335
2135
1770
1110
| 34
37
45
| 2285
2115
1740
1070
| 35
38
46
| 2230
2080
1725
1035
| 36
38
46
| 2200
2030
1685
1000
| 36
39
47
| 2140
1975
1645
950
| 37
41
49
| 2080
1915
1615
905
| 38
42
50
| 2000
1810
1565
835
| 40
44
51
|
70| 72| 75| 77| 80| 84| 88| 96|
3+126( )-45$
| ****
126,000
| (IGH*
-ED-(IGH
-ED-,OW**
,OW
| 2445
2195
1795
1480
| 38
43
52
63
| 2395
2170
1780
1475
| 39
43
52
63
| 2385
2140
1770
1450
| 39
44
53
64
| 2330
2120
1760
1440
| 40
44
53
65
| 2275
2090
1725
1440
| 41
45
54
65
| 2225
2030
1690
1415
| 42
46
55
| 2130
1975
1655
1405
| 44
47
56
| 2015
1855
1610
1375
| 46
50
58
|
66| 66| 68|
Can be C or N
- Factory Set Cooling Speed
- Factory Set Heating Speed
NOTES :
- Temperature rises in the table are approximate. Actual temperature rises may vary.
- Temperature rises shaded in gray are for reference only. These conditions are not recommended.
MODEL IDENTIFICATION CODE
SPECIFICATIONS
FG7SA MODEL NUMBERS| -045-23!| -054-23!| -072-24″| -090-24″| -072-35#|
-090-35#| -108-35#| -126-45$
---|---|---|---|---|---|---|---|---
)NPUT – “TUH (A)| 45,000| 54,000| 72,000| 90,000| 72,000| 90,000| 108,000|
126,000
(EATING #APACITY – “TUH| 36,000| 43,200| 57,600| 72,000| 57,600| 72,000|
86,400| 100,800
AFUE| 80.0| 80.0| 80.0| 80.0| 80.0| 80.0| 80.0| 80.0
“LOWER $ X 7| 10 X 6| 10 X 6| 11X 8| 11 X 8| 10 X 10| 10 X 10| 11 X 10| 11 X
10
-OTOR (.0. – 3PEED – 4YPE| 1/3 – 4 – 03#| 1/3 – 4 – 03#| 1/2 – 4 – 03#| 1/2 – 4 – 03#| 1/2 – 4 – 03#| 1/2 – 4 – 03#| 1.0 – 4 – 03#| 1.0 – 4 – 03#
-OTOR &,!| 4.80| 4.80| 8.20| 8.20| 7.50| 7.50| 13.75| 13.75
2ATED %XT. 30 – )N. 7.#.| 0.5| 0.5| 0.5| 0.5| 0.5| 0.5| 0.5| 0.5
4EMPERATURE 2ISE 2ANGE – Ž&| 30-60| 30-60| 35-65| 35-65| 35-65| 35-65| 40-70|
40-70
3HIPPING 7EIGHTS| 100LBS| 100LBS| 110LBS| 115LBS| 115LBS| 120LBS| 125LBS|
145LBS
FG7SK MODEL NUMBERS| -054-23!| -072-24″| -090-24″| -108-35#| -126-45$
---|---|---|---|---|---
)NPUT – “TUH (A)| 54,000| 72,000| 90,000| 108,000| 126,000
(EATING #APACITY – “TUH| 43,200| 57,600| 72,000| 86,400| 100,800
AFUE| 80.0| 80.0| 80.0| 80.0| 80.0
“LOWER $ X 7| 10 X 6| 11 X 8| 11 X 8| 11 X 10| 11 X 10
-OTOR (.0. – 3PEED – 4YPE| 1/3 – 4 – 03#| 1/2 – 4 – 03#| 1/2 – 4 – 03#| 3/4 – 4 – 03#| 1.0 – 4 -03#
-OTOR &,!| 4.80| 8.20| 8.20| 13.75| 13.75
2ATED %XT. 30 – )N. 7.#.| 0.5| 0.5| 0.5| 0.5| 0.5
4EMPERATURE 2ISE 2ANGE – Ž&| 30-60| 35-65| 35-65| 40-70| 40-70
3HIPPING 7EIGHTS| 100LBS| 110LBS| 115LBS| 125LBS| 145LBS
ACCESSORIES
FG7S (A, K) KITS
Description| SKU
“!” #ABINET lXED SPEED, HIGH EFlCIENCY, &3(%| 904872
“”” #ABINET lXED SPEED, HIGH EFlCIENCY, &3(%| 904873
“#” #ABINET lXED SPEED, HIGH EFlCIENCY, &3(%| 904874
“$” #ABINET lXED SPEED, HIGH EFlCIENCY, &3(%| 904875
“!” #ABINET VARIABLE SPEED, HIGH EFlCIENCY, 63(%| 904876
“”” #ABINET VARIABLE SPEED, HIGH EFlCIENCY, 63(%| 904877
“#” #ABINET VARIABLE SPEED, HIGH EFlCIENCY, 63(%| 904878
“$” #ABINET VARIABLE SPEED, HIGH EFlCIENCY, 63(%| 904879
“!” #ABINET DOWNmOW SUB BASE KIT| 902974
“””, “#”, “$” #ABINET DOWNmOW SUB BASE KIT| 904911
5.3. ,0 #ONVERSION KIT (0 TO 10,000 FT.)| 904914
ANADA ,0 #ONVERSION KIT (0 TO 4,500 FT.)| 904915
“OTTOM RETURN lLTER 20 PER BOX, “!” CABINET| 903088
“OTTOM RETURN lLTER 20 PER BOX, “”” CABINET| 904916
“OTTOM RETURN lLTER 20 PER BOX, “#” CABINET| 904917
“OTTOM RETURN lLTER 20 PER BOX, “$” CABINET| 904918
3IDE RETURN lLTER KIT| 541036
GENERAL TERMS OF LIMITED WARRANTY NORDYNE
will furnish a replacement for any part of this product which fails in normal
use and service within the first ten years of installation, in accordance with
the terms of the warranty.
For complete details of the Limited Warranty, including applicable terms and
conditions, see your local installer or contact the NORDYNE warranty
department for a copy.
NORDYNE 8000 Phoenix Parkway | O’Fallon MO 63368-3827 Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A (03/2009) 213D-0309 www.nutonehvac.com NuTone® trademark used under license. © Nortek Global HVAC, LLC. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>